F.A.Q. Where are the Mitsubishi Lancers assembled Where are the factories that assemble Mitsubishi cars for Russia

Mitsubishi lancer 10 is a car that has been produced by Mitsubishi since 1973. This car is one of the most popular cars.

All Mitsubishi lancer car models were and are in demand, but the real interest of buyers arose after the release of the lancer 10 model. It is its sporty bright appearance, safety, ease of operation and comfort that every car enthusiast dreams of.

At the heart of the new lancer 10 are two models Mitsubishi-cX (which was presented at the motor show in Tokyo) and Concept-Sportback (was presented at the Frankfurt Motor Show). In 2007 appeared new Mitsubishi lancer 10 and was presented in Detroit at the auto show.

In the same year, it went on sale as a 2008 model. IN this vehicle developed new body-Mitsubishi Rise. In 2011, the version of the car was updated. Along with the update, a new name appeared -Sportback. These cars have different engines:

Petrol

• 1.5 l 4A91 P4 109 k.s.
• 1.6 l 4A92 P4 117 k.s.
• 1.8 l 4B10 P4 140-143 k.s.
• 2.0 l 4B11 P4 150 k.s.
• 2.0L 4B11T P4 turbo 241 hp
• 2.0L 4B11T R4 Turbo 295-359 HP
• 2.4 l 4B12 P4 170 k.s.

Diesel

• 1.8 L 4N13 R4 turbo 116 hp
• 1.8 L 4N13 R4 turbo 150 hp
• 2.0 L VW P4 turbo 140 hp

Consider the main characteristics Mitsubishi Lancer X:

Types of gearboxes for Mitsubishi Lancer 10

• Variable speed drive
• Mechanics

The advantage of the CVT, which is a subspecies of the automatic gearbox, gear shifting is smooth, while the car does not feel any jolts. This gearbox is installed on all 10 Lansler models with engine sizes: 1.5, 1.6, 1.8, and 2.0 liters.

The advantage of a manual transmission is that it has five speeds. The quick response of gear shifting and engine response to them was a novelty for motorists.

These gearboxes give your vehicle the ease of movement and top speed in 10 seconds.

This car model provides three types of equipment: "Invite", "Invite +" and "Intense".

The most simple and basic equipment - Invite, provides a set of options that are needed. This equipment is only available for a car with a 1.5L engine. The equipment includes:

• Air conditioner
• Glass heating
• Airbags
• electric drive
• Audio preparation
• breezes,
• On-board computer,
• leather trim for some elements of the car interior,
• LCD display,
• wooden finishing of interior elements.

For vehicles with a 2.0L engine. A complete set with the maximum number of options is available - "Intense":

• Climate control
• 5 airbags
• sports suspension with stretching between the front shock absorbers
• front aerodynamic fairing painted in body color
• front fog lights, rear spoiler and side skirts
• CD/MP3 changer for 6 discs

IN Lancer car There are three types of equipment: Intense, Invite, Invite +

Invite: With this configuration, the car has mudguards, on-board computer, leather trim for some elements of the car interior, LCD display, wood trim for interior elements.

The most popular types of Mitsubishi lancer 10 models

Lancer Ralliart

Budget fans will find plenty to do in the 2010 Ralliart. Using transmission with double clutch Evolution and all-wheel drive system, the Ralliart caters for decent performance for thousands less.

What's new in 2010

For 2010, the versatile five-door Sportback unites the Ralliart family.

Driving and experiences

As a supposed compromise between the base Lancer and Evolution, the Ralliart can be considered a success. There is the usual battle with the turbo, but once that threshold has been crossed (around 3000 rpm) the engine willingly unloads all its available power, approaching its 6500 rpm.

Compounding the turbo problem is the new TC-SST gearbox. Like many automatic manual gears, TC-SST cannot immediately respond when the driver first presses the gas pedal, which can cause an aggravation in a crowded stop.

FROM positive side, quick shifts can be performed manually. Drivers are more likely to take advantage of this feature during spirited drives when the car's handling capabilities shine. Like the Evolution, the Ralliart rewards its owner with responsive steering, great brakes and negligible body roll.

Featured Features

For Ralliart buyers who plan to spend time on the track or enjoy twisting back roads The TC-SST offers a Super Sport mode that allows quick shifts with magnesium paddles or a center shifter.

Super All-Wheel Control (S-AWC) Ralliart system, borrowed from Lancer evolution, provides excellent handling when the driver wants to explore the limits of the car. S-AWC includes three modes designed to adapt to different road conditions: Tarmac, Gravel and Snow.

car details

interior

Drive inside the Lancer Ralliart and you'll find a few accents to complement the updated appearance. To reflect the car's sporty nature, aluminum pedals have been added along with a leather-wrapped steering wheel and shift knob. Upgraded upholstery is standard, while Recaro front seats are reserved for the options list. Entering and exiting Recaros can be a challenge due to the high side supports; convenient backseat Gives enough space for medium sized adults.

exterior

When it was redesigned for 2008, Mitsubishi Lancer took on a more flamboyant look that was improved using the 2010 Ralliart. The Ralliart differs from the smaller Lancers with smoked taillights, front foglights, 18-inch alloy wheels, restyled front and rear bumpers and chrome dual exhaust tips.

The new Sportback model features a high-speed rear hatch with rear wing spoiler and rear wiper/washer. A ventilated aluminum cap has also been added. The result is a model that is more aggressive than the Lancer GTS, but not as threatening as the Evolution.

Notable standard equipment

Ralliart is the most expensive model of Mitsubishi Lancer, offering a wide range of standard equipment. Features include automatic system climate control that's easy to use, a height-adjustable driver's seat, a handy auxiliary input jack for your iPod, and Bluetooth hands-free functionality.

In addition, Mitsubishi's standard FAT-hands-free entry system, six-speaker 140-watt AM/FM/CD/MP3 audio system, and leather wheel with audio and cruise control. Passenger safety is regulated by front, front and side airbags, as well as a knee airbag for the driver and stabilization and traction control systems.

Notable accessories

Mitsubishi is offering two major upgrades to the Lancer Ralliart, one of which is a navigation device with a 40GB hard drive that stores maps and music files. Next Recaro sport pack, bring

In 2013, a new type of car was released - Mitsubishi Lancer Evolution

An icon in its own right, the legendary Mitsubishi Lancer Evolution is a high-performance variant of the Mitsubishi Lancer Sedan. Weighing less than 3,600 pounds in standard format, the Lancer Evolution is equipped with a 2.0-liter turbocharged 4-cylinder engine, four-wheel drive engine and a long list of engineering upgrades. Here are five more facts about the 2013 Mitsubishi Lancer Evolution.

• Visually, the Lancer Evolution differs from other Lancer models with its redesigned front end with larger air intakes, intakes and vents, front vane fans, front and rear fenders, rear diffuser panel through which twin exhaust ports pass, and a rear spoiler designed to create additional downforce at higher speeds. Special lightweight 18" aluminum wheels are shod with P245/40R18 tires with an asymmetric tread pattern.
• Lancer Evolution turbocharged 2.0-liter 4-cylinder engine generates 291 horsepower at 6500 rpm and 300 lb-ft. torque at 4000 rpm and zings up to 7000 rpm. 5 speed mechanical box transmission is standard on the Lancer Evolution GSR. Lancer Models The Evolution MR gets a 6-speed Dual Clutch Shift Transmission (TC-SST) with paddle shifters and driver-selectable Normal, Sport and S-Sport modes. According to Mitsubishi, the TC-SST automatic manual transmission shifts faster than a conventional manual or automatic transmission gears.
• Every Lancer Evolution system is equipped with an all-wheel drive system Mitsubishi control All-Wheel Control (S-AWC), which includes an active center differential, active brake controller, rear differential and helical limited slip differential, the S-AWC system provides driver selectable Tarmac, Gravel and Snow modes.
• The 2013 Mitsubishi Lancer Evolution features an aluminum cover, fenders, roofs, and bumpers, and for better weight distribution, the automaker finds the battery and washer reservoir in the car's trunk, which is one reason why it's only 6.9cc. by volume. As a result of these actions, measured as a percentage of the total vehicle weight, the weight of the Lancer Evolution GSR is distributed between 56.7 / 43.3 front to rear, while the weight of the Lancer Evolution MR is distributed 57.4 / 42.6 front to rear.
• In addition to powerful engine and a sophisticated all-wheel drive system, the 2013 Lancer Evolution is equipped with service brakes with 13.8-inch front ventilated discs clamped by 4-piston calipers, and 13-inch rear ventilated disc brakes with 2-piston calipers. The Evolution also uses an inverted strut and multi-link front suspension. rear suspension with aluminum control levers.

Mitsubishi lancer 10 is a new generation car that is assembled in Japan. He is quite reliable vehicle, the price of which is acceptable, but at the same time - meets the quality. In this model, all the faults of the previous ones have been corrected. Generations of Mitsubishi. Since the Mitsubishi lancer 10 is already a little outdated, the article presents the "new" of this car brand.

This is the world's largest automaker, headquartered in Tokyo, the capital of Japan. In 2011, Mitsubishi Motors became the sixth largest Japanese automaker and the sixteenth largest automobile manufacturer in the world. But in fact, Mitsubishi Motors is just a part of a very large Mitsubishi Corporation holding, which includes quite a lot of very different areas of production, including aircraft.

Where are Mitsubishi cars assembled? The official importer of cars of this brand to Russia for a long time was the Rolf company; You probably have seen more than once behind Mitsubishi cars, along with the name of the model, also a nameplate with the inscription "Rolf" - it was this company (more precisely, a group of companies) that was officially importing cars from Japanese factories into Russia - today it is MMS Rus LLC.

Meanwhile, models for Russia are produced at the following plants of the company:

So, where are specific Mitsubishi car models assembled?

Where is the Mitsubishi Lancer assembled?

One of the best-selling Mitsubishi models in Russia, which has gained popularity due to its aggressive appearance, like its main competitor - Toyota Corolla - is a "purebred" Japanese and is assembled at the Mizushima Plant in southern Japan, one might say, on a neighboring conveyor with right hand drive models. At the same time, simple Lancers and the dream of youth - Lancer Evolution are assembled at this plant. Nevertheless, the model comes to Russia not with such a strong rise in price as the same competitor of the model - Corolla, but Lancer quality outperforms many other model competitors.

Where is the Mitsubishi ASX assembled?

Another one of the most popular models in our country, but already as a compact crossover at an affordable price - Mitsubishi ASX is no longer quite Japanese. The model, in addition to its native place of production, is also assembled in the USA at a plant in Illinois. And from Japan, we receive models assembled at the Nagoya plant in Okazaki. It is difficult to say which car production in our country is more: Japanese or American, however, it is believed that the latter are no worse than those of the Asian assembly and even in some way surpass the "thoroughbred" Japanese in terms of suspension - occasionally there are complaints about creaking in the elements pendants in Mitsubishi ASX Japanese assembly, which is practically absent in American copies of the car.

It should also be noted that ASX models began to be produced in the USA after restyling in 2012 (2013 model year) - up to this point, all Mitsubishi of this model came to us from Japan.

Where is the Mitsubishi Outlander assembled?

And here is the first model of the automaker, which is produced in our country - the Mitsubishi Outlander is produced at the Kaluga Automobile Plant PSMA Rus in Russia. However, the model Russian assembly it will be possible to take more or less recent years - Outlander began to be produced in our country at the end of 2012, and disassembled to Russia, they began to be delivered in their third restyled generation.

As a result, we get that:

• models until 2012 (2 generations) produced in Russia - exclusively from Japan;
• models of the 2010-2012 model year (third generation) can be found in both Russian and Japanese production;
• and models after 2012 (the fourth and so on generations) are exclusively of Russian assembly.

However, the deterioration of quality due to the relocation of the assembly to our country is out of the question for a number of different reasons, the main of which, of course, is strict control over the quality of the Russian assembly of Outlanders and the fact that this assembly is SKD, and the localization of Russian components is only to glass elements and exhaust system components.

Where is the Mitsubishi Pajero assembled?

The legendary car, the dream of millions and one of the first SUVs that began to be mentioned in the criminal world of our country in the dashing 90s. Pajero is one of the oldest models of the automaker - in 2015 it turned 25 years old, during which the model went through 5 updates, which, in general, is not so much when compared with modern realities, but also a lot, because you need to understand that this is a true SUV .

And for potential buyers of this model, we have good news, Mitsubishi Pajero always made exclusively in Japan.

Where is the Mitsubishi Pajero Sport assembled?

One more real SUV Japanese “diamond” (see the Mitsubishi logo) and the no less legendary Pajero Sport has, perhaps, its most multinational history: generations that have been produced since the 2013 model year are produced exclusively in Russia at the same Peugeot Citroën Mitsubishi Automotive Rus plant under Kaluga, models from 2008 to 2012 were brought to Russia from Thailand, and the very first models, starting from 1998, were "purebred" Japanese, although in 2004 equipment from the USA also began to be delivered to Russia (in Japan at the same time Sports for Russia also did not stop gathering). Mitsubishi had such an interesting geography of deliveries Pajero Sport throughout the history of the existence of the model!

Where is the Mitsubishi I-Miev assembled?

The first Mitsubishi company, which not so long ago managed to see the widest expanses Russian Federation, is also assembled exclusively in Japan - at the Mitsushima plant in Kurashiki.

Where are Mitsubishi assembled - summary table?

Mitsubishi Lancer is a car Japanese company, which is the sixteenth in sales in the world. It has been produced since 1973, but such "experience" does not prevent the model from being popular and in demand. It is sold all over the world, only under different names. For example, until 2008, about six million cars were sold.

Therefore, it is not surprising that the company's engineers decided to re-release the car. And not just once. By the way, before buying a car, many are interested in the place of its production. And in this article we will figure out where the Mitsubishi Lancer is assembled.

Where are the factories that assemble Mitsubishi cars for Russia

As you know, Mitsubishi is a Japanese company headquartered in Tokyo. For a long time, Rolf was the main partner for deliveries to Russia. Now almost all cars are distributed by MMS Rus LLC.

So, the factories from which cars are brought to us are located in:

— Japan. The production is called Nagoya Plant, and it is located in the city of Okazaki. This is the largest plant in the world. By the way, more than half of the models are delivered to Russia from here.

The second Japanese enterprise that fills our market is called Mizushima Plant. It is located in the city of Kurashiki;

— America. There is a factory in Illinois called Mitsubishi Motors North America, Inc. It has changed its name three times in its history. But, since 1991, the Japanese completely bought it. From here, cars are delivered to the markets of the whole world, and Russian ones, in particular;

- Russia. In the city of Kaluga in 2010, a plant called Peugeot Citroën Mitsubishi Automotive Rus was built. The Japanese bought 30% of the shares. The remaining parts are divided between the Peugeot and Citroen concerns.

Mitsubishi Lancer for Russia is assembled exclusively in Japan in the city of Kurashiki. Both regular Lancer and Lancer Evolution are made here. As for the cost of the Japanese model, it is much lower than the "purebred" competitors.

On the domestic market Japan Mitsubishi Lancer is called differently. But, it doesn't change its essence. It is all-wheel drive and safe. Also, regardless of its low landing, it will pass through any terrain without discomfort for the driver.

As for safety, Mitsubishi Lancer was first tested in 1998. Then he received only two stars. It was called incompatible with pedestrians and passengers. But, already in 2009, the model was checked again. She received five out of five points.

In 2009, the car took first place in theft. This observation was based on the payments of the largest Russian insurance company. For the first half of that year, the percentage of theft of the Japanese was 13.6%. But, the statistics did not include uninsured models. Therefore, we will not tell you the exact number.
But according to the Ministry of Internal Affairs of Russia, this foreign car became the most stolen in 2010 as well.

One of the Japanese company's best flagship sedans is redesigned to fit your needs. Russian market. Mitsubishi Lancer was last updated in 2011. Well, to be precise, the most recent modification was shown a week ago in Los Angeles. But, it has not yet entered the world markets, and it is not known when it will appear in Russia. Therefore, we are considering a 2011 car.

We got it at the end of 2012 and received a redesigned bumper, chrome grille, sports body and excellent sound insulation. A new information and entertainment flat-panel display was installed in the cabin, as well as interesting seat upholstery.

But, the main changes are under the hood. Previously, a 1.5-liter was installed here Gas engine with a capacity of 109 Horse power. Now it also runs on gasoline. But, the displacement has increased to 1.6, and the engine produces 117 horsepower. The transmission can be either manual or automatic.

Previously, the model accelerated to hundreds in 11.6 seconds on the mechanics, and in 14.3 seconds on the machine. Now - the same car reaches hundreds of kilometers per hour in 10.8 and 14 seconds, respectively. Fuel consumption is also pleasantly pleased. It decreased by 0.2 liters in all driving modes.

In the interior, it is worth noting the decorative lining on the doors and the center console. Also, now there are many pockets for small things, in which you can put your phone or necessary items. Well, the seat upholstery is made of practical and wear-resistant leather. You can choose from gray and silver.

The safety of the model has been improved with new brake systems and great airbags. In the first case, the model received a brake pedal, which helps not to crash into anything if the accelerator switch is stuck in the depressed position. The program collects data from all the pedals in the system and automatically analyzes them. In the event that both the brake and the gas are pressed at the same time, the car itself begins to slow down. Thus, the model first slows down the car, and then stops it.

The representative of the main importer of Mitsubishi Lancer in Russia notes that the car has already broken all possible sales records. As already mentioned, the 2012 updates affected the exterior, interior and technical part car. We can conclude that Japanese engineers have made the model as close as possible to the one that most Russians want to see in their garage.

Reliable and stylish design, powerful power point and thoroughbred Japanese quality- this is exactly what makes Mitsubishi Lancer popular and in demand not only in ours, but also in the world's car showrooms.

Many motorists are interested in where they produce individual ones. For example, a man has a Pajero and he wonders where his brothers are made. In this article, we will see where certain Mitsubishi models are produced.

Where is collected Mitsubishii I- Miev?

This is the first electric car of the Mitsubishi Motors concern. Not so long ago, the car appeared on the territory of Russia. At the moment, this model is assembled exclusively in its homeland - in Japan, at the Mitsushima plant in the city of Kurashiki.

Where is collected Mitsubishii pajero Sport?

Legendary, sold in Russia, has a multinational history.

• Since 1998, the car has been produced exclusively in Japan.
• Since 2004, components from the United States began to be imported to Russia, although production in Japan continued.
• From 2008 to 2012, cars were imported from Thailand.
• From 2013 to 2015, it was produced at a plant near Kaluga.

Here is such an interesting story for this Japanese SUV.

Where is the Mitsubishi Pajero assembled?

Pajero is the dream of millions of motorists around the world. One of the first SUVs that quickly became popular. In 2015, the model turned 25 years old, making it one of the group's oldest models. During this time, the model has experienced 5 updates. Mitsubishii pajero assembled in Japan and this is good news for true connoisseurs of Japanese technology.

Where is collected Mitsubishii outlander?

From 2012 to 2015, the assembly was carried out in Russia, all at the same plant near Kaluga. The result is the following:

• 2010 - 2012 - Outlanders were assembled in Russia from components from Japan;
• Assembly after 2012 (until 2015) was carried out in Russia;

The Russian assembly is subject to strict quality control. At the moment, there were no questions about the quality of the Russian assembly, although some motorists made comments in the direction of the Kaluga plant.

Where is collected Mitsubishii ASX?

- one of the most popular models in Russia in terms of price / quality ratio. In addition to production in Japan, at the Nagoya plant in Okazaki, the car is produced in the United States at a plant in Illinois. It is difficult to determine which car is more produced in Russia: American or Japanese. Some believe that American-built models are less likely to complain of creaking in the suspension.

Where is collected Mitsubishii Lancer?

It's no secret that this model is one of the best-selling in Russia. main competitor, Toyota Corolla, is a purebred Japanese who is assembled at a factory in Japan. On the same conveyor they collect and. The model is supplied to Russia with a small margin, because the direct competitor of the model is a serious obstacle on this price level.

Below is a table of countries where Mitsubishi models are produced.