The spare wheel is sometimes annoying for those drivers who have not had to use it. There is even an expression among the people: "It is necessary, like the fifth wheel of a cart." It takes up space, the weight is solid, you ride with you every day. Yes, and some manufacturing companies support such thoughts of car owners, sometimes not completing their cars with spare wheels, but applying only a can of sealant and a compressor. Maybe this approach is good in countries with a developed road service, but if we imagine the situation that the tire was pierced (it was pierced, and not caught by a self-tapping screw) more than a hundred kilometers from the city, then the meaning of the well-known phrase "Half the kingdom for the horse" is quite applicable to spare.
Spare or dokatka?
Best of all for our Russian realities, when the car is equipped with a full-size spare wheel. That is, a tire of nominal size is mounted on a steel or alloy wheel. Thus, the owner of the car is “insured” in case of damage not only to the tire, but also to the disc. Many companies apply a spare tire on a steel rim to a car with alloy wheels. In this case, the tire can be the same as the other four, but there is also a variant with a steel disk of nominal size and with a stub tire. In this case, discreet inscriptions like “Temporary use only” (for temporary use) are applied to the tire. The tread is only a couple of millimeters high and the corresponding speed limit is up to 80 km/h.
The next step in the "decrease in the quality of life" of the car owner is a dokatka in its purest form. A tire with a slightly marked tread, a little more than a bicycle tire, is put on a steel, very relief stamped disk, often of a larger diameter than the main wheels. At the same time, the outer diameter of such a spare wheel is still noticeably smaller than that of the main wheels of the car. On such a “conditional” spare wheel (especially installed in front), you yourself will not even want to move faster than 80 km / h. tram tracks will be very uncomfortable.
Where to store?
Now let's look at what options for placing a spare tire exist, using specific examples. The story will go, as dialectics teaches - from simple to complex. Let's start with the harsh domestic "rogues".
What is done when tuning the famous VAZ car? That's right, place the spare tire near the door luggage compartment.
According to the same scheme, a spare wheel is placed for another respected car with our roots - the Chevrolet Niva. A slight downside to this type of placement is the need to lift the wheel onto a bracket, but will that stop the real men?
The creators of most pickups and many imported SUVs have a spare tire under the floor - behind rear axle car. The wheel is pulled to the bottom by a chain or cable by means of a winch.
Everything seems to be convenient and it is not necessary to raise the spare wheel high. But imagine pulling out the spare tire while the car is lying on its belly in mud or snow. Digging a ditch? So this scheme is not for the most difficult conditions.
The easiest and most common way to store a spare wheel is to stow it in a niche stamped into the floor of the luggage compartment.
The disadvantage of placing the spare wheel in a niche is the need to unload the trunk in order to get the spare wheel. And the dirty dismantled wheel will have to be sent to a clean niche.
But to the point of absurdity, such an arrangement of the spare wheel has reached a convenient and practical (in all other respects) Nissan crossover X-Trail of the past generation. The fact is that the luggage compartment is two-level, it has four shelves and a box.
The logical continuation was to install the rear bumper from RIF :)
Among the variety of bumpers presented in the catalog, we chose the RIF rear bumper UAZ Loaf with a platform for a winch and an elevator gate
The choice is dictated by the fact that, firstly, we have a lifted Loaf, therefore, we need to take a bumper under the elevator ( unlike the front, rear bumper not universal, there is for the elevator, and there is without it). Secondly, the regular storage place for the spare wheel is inconvenient - dirt flies, and it will be problematic to put a larger wheel there. In addition, there is an idea to put in place the spare wheel HBO. So the gate on the bumper is the way out. And a place for a winch will also not be superfluous - you look someday and install it.
Let's consider a new bumper, it is well packed just like the front one: first in a tight plastic sleeve,
then still in a soft foamy material.
There is a sticker with the model name of the product
The bumper is painted black powder paint, windows for installing lights are visible on the sides. From below two strong, towing eyes.
FROM reverse side we see protruding mounting brackets to the frame, and in the middle there is a niche for the rear winch
The bracket for the "gate" is made monumentally.
Hook for which the gate is fixed
Niche for additional winch
Bumper mounting points
Sticker with manufacturer's coordinates and certificate numbers
The box itself is packed separately.
It is equipped with a locking mechanism, fasteners and a gas stop.
Everyone looked, rejoiced again good quality welded seams of RIF products and proceeded with the installation of the bumper.
But first you need to dismantle the standard bumper.
Upon inspection of which the quality of painting the frame was depressing :(
The car is six months old, it hasn’t really driven yet, and the paint has already begun to peel off in shreds
Okay, we were horrified and we are working further: we unscrew the halves of the old bumper, dismantle the towing device, unscrew the left false footboard and remove the right footboard. Its attachment points are welded to the frame. They did not cut it off, since it does not interfere with the installation of a new bumper.
We install the center bracket on the bolts that come with the bumper.
The right and left frame brackets have corroded - we clean them from rust, degrease, and paint.
We wait until the paint dries, and then we fasten the new spacers that are included with the bumper. If you do not install them separately, but try to do it together with the bumper, then nothing will work - it will be difficult to crawl to the mounting bolts.
Install the bumper in place. Fasten to three brackets
Don't forget to screw down
We install the gate in place. We fasten the gas stop.
We try how the gate opens, how it is fixed on the bumper. Trying to open the rear doors. We make sure that they do not cling to anything and finally stretch the bumper mounting bolts.
Like all power bumpers, this one weighs a lot: the bumper itself weighs 33kg and the gate another 15kg. In total, 48kg is added.
Commercial and Industrial Group "Rival" is a leading manufacturer of accessories and additional equipment for foreign cars domestic cars And ATVs since 2006.
Range:
Aluminum and steel crankcase protection "RIVAL PLATE"
Attachment "RIVAL 4x4" . Protection for ATVs "RIVAL OFF-ROAD"
Anti-theft systems "RIVAL SECURITY"
Head units for RIVAL DIGITAL cars
Manufacturer's trademarks: RIVAL PLATE, RIVAL 4x4, RIVAL OFF-ROAD, RIVAL SECURITY, RIVAL DIGITAL.
Official website of the manufacturer: www.rival.su
Delivery in Moscow and the region
Pickup
Address: Moscow, Lobnenskaya st., 21, 2nd floor, office 221. To avoid unpleasant situations associated with the lack of the desired product in the warehouse, please call in advance and reserve it.
Delivery by courier in Moscow and the Moscow region
- Delivery cost: 300 rubles (from 10,000 rubles - free of charge)
- Delivery cost outside the Moscow Ring Road: 300 rubles + 20 rubles. for 1km.
Regional delivery
Delivery by Russian Post (cash on delivery - payment after receipt)
Postal delivery in Russia - from 250 rubles. (The cost and delivery time depends on the region, weight and declared value of the parcel)
Delivery transport company
- Delivery cost from 400 rubles. (depending on weight, dimensions and declared value of the order).
- Delivery to transport companies - PEC and Business lines is free! The cost of delivery to other transport companies is 300 rubles!
Delivery by sdek
- Delivery to the pickup point (more than 500 cities)
- Delivery to address
The spare wheel in a protective case placed on the tailgate of the UAZ Hunter looks very organic on the car, but at the same time, some problems may arise during the operation of the car.
Problems of placing a spare wheel on the tailgate of the UAZ Hunter.
The first problem is associated with the danger of the tailgate sagging and, as a result, its hinges failing or breaking out of the body, although as a rule, in most cases this happens because a spare wheel is hung on the door that is much larger than the standard one in size and weight.
The second, more important and urgent problem is related to the fact that the UAZ Hunter spare wheel goes beyond the dimensions of the rear bumper, therefore, when it encounters some kind of high obstacle, it is the first to take the blow, which is transmitted to the tailgate and quite expectedly deforms it, and there is no need for costly repairs.
Options for placing a spare wheel outside the tailgate UAZ Hunter.
Ways to solve problems arising from mounting a spare wheel on back door UAZ Hunter basically only four: move the wheel to the trunk of the car, fix it on the crossbars or roof rack, make a special bracket-holder (wicket) on, do not carry a spare wheel with you at all. All these options have long been tested by UAZ owners and each of them has its own advantages and disadvantages.
In the case of the UAZ Hunter, it’s impossible to just take and put the spare wheel in the trunk without making additional alterations. This is prevented by the dimensions of the trunk itself, the length of which at the floor level is about 640 millimeters, while the outer diameter of the regular wheel with dimensions 225/75 R16 is 744 mm. About the more preferable vertical placement of the spare tire in the trunk, we are not talking at all.
Additional alterations consist in increasing the height of the rear seat supports by 5-6 centimeters, then the standard spare tire is partially placed under it and it becomes possible to place it in the trunk. A significant disadvantage is the reduction in the total volume of the already small luggage compartment of the UAZ Hunter.
Moving the spare wheel to the cross bars or roof box.
This method will require additional financial investments for the purchase or manufacture of crossbars or stationary forwarding trunk on the roof. The main disadvantages: an increase in the height, center of gravity of the car and fuel consumption, some difficulties in getting a spare wheel if necessary, and then installing it in place.
Special bracket-holder (gate) for a spare wheel on the rear power bumper.
Its manufacture and installation makes sense only if there is some free space between the spare wheel and the tailgate, due to which, in the event of an impact, the wheel will not reach the door. Making a gate and installing it on will require a technically competent approach, otherwise additional knocks and unpleasant vibrations will occur when traveling off-road.
Do not carry a spare tire with you at all.
An extremely controversial option, although it has the right to life. Instead of a spare tire, you can carry with you or an express tire repair sealant in an aerosol can. On the one hand, the presence of such kits in some cases will allow you to do without a spare wheel and save space in the trunk.
On the other hand, tire repair laces and express sealants can help mainly only if the tire is damaged in the tread area and can be completely useless in case of a tire puncture with a large hole diameter, a torn puncture or a side cut.
Restoring the tire with express sealant will of course allow you to get to the nearest tire shop, but the tire itself may have to be thrown away after that, and given the prices for off road tires, such pleasure can come out not cheap at all.