Vaz 2109. The fact that the cable broke is very easy to understand: when you pull the hood opening lever from the passenger compartment, you don’t feel any effort and no sounds. The lever does not return to its place. The hood naturally does not open, since the lever pulls back the retaining spring with the help of a cable.
Sooner or later, the hood of the VAZ 2109 will still have to be opened, but how to do this if it does not open when pulling the lever from the passenger compartment. Naturally, no one wants to spoil the hood, and it must be opened without mechanical damage. This is done as follows: it is necessary to crawl under the hood from below and bend the retaining spring of the VAZ 2109 hood.
Just like that, you can’t climb under the hood of the VAZ 2109 from below, because protection is installed from below. This work is best done on a viewing hole or trestle. Naturally, you can cope with lying under the car, on the trestle or inspection hole, it will be more convenient, since it is not so easy to reach the hood spring of the VAZ 2109 from the bottom of the car.
The first thing to do is remove the protection. It is better to remove all its sheets, so that it is more convenient to crawl.
They are easy to remove - the screws are unscrewed and the sheets are easily removed. Now it is necessary through the resulting space to try to reach out with your hand to the retaining spring under the hood.
It is better to highlight yourself with a flashlight, since nothing will be visible and you will have to act by touch. It is necessary to bend the spring towards the battery. When the hood opens, you will hear a click, similar to what is always heard when opening the hood from the passenger compartment. This will be easier to do if someone from above presses on the hood in the area of \u200b\u200bthe lock. That's it, the hood of the VAZ 2109 is open, despite the torn cable.
The hood of the car is opened by pulling a special metal rope. However, nothing lasts forever. The rope may break. Now it will become impossible to open the hood, what should I do? So, let's consider several variations of the solution of the problem that has arisen.
Opening the hood of the VAZ 2107?
If the hood opening handle moves easily, then the tension cable has broken. It is necessary to determine exactly where this breakage occurred. If this happened closer to the opening handle (it is located in the passenger compartment), then the dangling cord can be picked up with a homemade hook or other convenient means, pulled out into the passenger compartment and made repair work. If the tension cable breaks in engine compartment, then the problem is more serious, but you should not panic. You can hook a broken cable from the side of the radiator grille. Any braid will work for this. You can also try to get the hook of the lock through the cabin air ducts.
Such actions are very difficult to perform. If all efforts are in vain, then you will have to cut off the mounting loops of the hood itself (repair will be costly in the end). To do this, the radiator grille is removed, the mounting loops are cut off with a grinder, then it is not difficult to replace the broken cable.
Opening the hood of the VAZ 2109?
In order to open the hood on the VAZ 2109, you need to get under the car. Next, we perform simple steps. Remove the crankcase protection and tin duster. This must be done so that the hand passes next to the radiator. Next, we feel for the ring to which the cable is attached, and press the lock. The assistant from above opens the hood. It is worth noting that the rope is attached directly to the lock, so we only press on the ring from the side and in the direction of the driver's seat. For craftsmen, the method of opening the hood with a long wire is suitable. You can pick up the hood lock with a homemade hook.
Opening the hood of the VAZ 2114?
For this machine, the method of opening the hood is the same as for the VAZ 2109. After you remove the engine protection, you need to take the tail of the spring to the side (this is how the cable works). For the VAZ 21014, the radiator grill is made of plastic, so you can simply break it, replace the cable and the grill itself (it is very inexpensive).
Qualified help is the best solution
If you yourself cannot solve the problem with opening the hood on your vehicle, then it is better to contact technical assistance. A qualified team will quickly solve your "trouble" and you will be able to continue operating the car. In Tolyatti and the region, the General company provides effective assistance. This is the right solution to many road and technical problems with a technical tool.
Assumes some knowledge. And we're not talking about driving technique or rules now. traffic. In any case, minor breakdowns and malfunctions are inevitable, which it would be nice to be able to fix on the spot so as not to spend money on a tow truck and service. Such skills will save you not only finances, but also time with nerves.
Sometimes it happens that the hood on 2115, 2114 or 2109, and on other cars from the Volga Automobile Plant, does not open or close. This is a very unpleasant breakdown, and it is not immediately clear what to do in this case. As a rule, this is caused by the fact that the lock drive cable that connects it to the opening handle has broken. Do not rush to go to the mechanics at the service station. you can easily fix it yourself, you only need a minimum of tools and a pit. Well, or overpass. And that is in the unoptimistic case.
If you are "lucky"
First, remember: if the cable breaks, do not try to open the hood by force. This will only make it worse, because the metal at the point of its junction with the body is not the thickest. Let's start with an easier case. Regardless of whether VAZ-2114 or VAZ-2109, as you know, you need to open the hood from the passenger compartment using the handle. So, if the cable broke right next to it, then you can, by unwinding it, pick up its tail with pliers. Then pull it towards you and. Both on the VAZ-2115 and on older models, the circuit is the same, so do not immediately rule out this option. Actually, after you have opened the hood, you can start repairing, so that after everything you don’t have to climb for the pliers again.
For repair, in fact, you need only one part. Carefully remove the broken cable from the mounts and install a new one in them. The hood will open normally. The only detail: it is better to ask someone for help, so that he will press the spring of the mechanism while you attach the other tail to the handle. Then the cable will be tighter.
If not lucky
A less good outcome, unfortunately, is more likely. If the hood on your VAZ-2114, VAZ-2115 or VAZ-2109 does not open and you cannot feel its edge from the passenger compartment, you will have to drive into a pit or overpass. Some demolition work will have to be done.
Unscrew the engine cover. It is attached with several bolts, and you will need a 10 wrench. And then crawl your hand between the engine and radiator towards the hood. The opening mechanism must be moved towards the driver's door. Ideally, you should have someone help you, because in the normal state, this mechanism will be more difficult to open. If someone or something presses down on the hood, you can open it much easier.
Sliding the mount, recline and fix it. If this is not done, it may well slam shut and have to crawl under the car again. As we wrote above, start repairing as soon as possible so that it is not necessary to do this procedure every time you need to check the oil because of a torn cable.
The hood opening cable on the VAZ-2115, VAZ-2114 and VAZ-2109, as practice shows, can break for a number of reasons, the main of which is the temperature difference. The steel wire used for it is very sensitive to breakage, and again, it does not become stronger from defrosting / freezing cycles.
To prevent this kind of damage in the future, we recommend using a braided wire rope. In such conditions, it shows itself stronger and more durable. And your head will definitely stop hurting about this if you choose the option of a cable with a casing. It will smooth out temperature fluctuations and ensure uninterrupted operation.
After replacement, the hood will open and close for some time with some effort. This is a normal situation, it takes some time to “grind in” the parts, and after a few weeks on the VAZ-2109, VAZ-2114 and VAZ-2115, as you will notice, it will no longer be a problem.
Afterword
If the cable broke on the VAZ-2114, VAZ-2115 or VAZ-2109, do not rush to the service station. It is quite possible that you will fix the problem faster than even getting there, and certainly cheaper. For this repair, you will need the cable itself, a screwdriver and a 10 wrench to unscrew the engine protection from below. To replace it, it is better to purchase an option with a casing and from a “braid”, it is stronger and more resistant to temperature conditions.
Car owners often face the problem of opening the hood due to a broken cable. This is an important detail that helps to gain access to the "heart" of the car. A broken cable drive causes a lot of trouble for the driver. Breakdowns always happen unexpectedly and at the wrong time.
Imagine a situation when you are hurrying to work on a winter morning, trying to start your car, but nothing happens. Urgently pull the lever that opens the hood to look at the engine. Heard characteristic sound broken rope. And you understand that you have to go to work in a taxi.
Any driver should be able to get out of such situations. This will allow you to do without the services of car services, save money and time. This article will help you learn how to open the hood if the cable breaks. Applying the tips, you will cope with the problem.
Ways to open the hood if the cable breaks
The design of the hood, the lock and the location of the cable drive on cars are different. But the repair sequence remains the same in all cases. Owners domestic brands more fortunate, as manufacturers over the years have not made significant changes to the design of cars produced. Therefore, opening the hood will always work without problems.
Most often, the cable breaks near the lever, less often under the hood. In the first case, it is easy to deal with a breakdown, and in the second you have to tinker.
When the cable broke in front of the lever
This is the simplest situation. To eliminate the breakdown, inspect the place of fastening of the cable and the hood opening handle in the passenger compartment, the stopper may have flown off the lever - insert it into place and fasten it. If you notice that the cable itself has broken off, then you will need pliers. To open the hood, try to firmly grasp the cable together with the casing and pull it down. It might not work the first time. If a stall occurs, cut the cover and wind the metal cable around the pliers, and then pull with great force - the hood will open.
When the cable broke under the hood
If you examined the mount inside the cabin and did not find anything, it means that the cable broke off under the hood next to the lock. This problem is considered the most serious, because you need to somehow gain access to the lock and forcibly click it.
For the rear opening hood, there are two main methods that can be applied to domestic and foreign cars.
- through the radiator grill. On many models, you can get to the lock using a homemade wire or knitting hook. Insert the hook into the slot in the grille. You can also climb through the air intake. Reach for the tab to which the cable is attached and pull on it. Some cars have a solid grille without slots. In this case, it must be removed, but this is not always easy to do. Worst case, you'll have to break it. A new grille is inexpensive.
- Through the crankcase. This is another way to get to the castle. You will need a viewing hole, but if there is none, you will have to repair it while lying on the ground, jacking up the car. Remove the metal protection of the engine oil pan. Using a long screwdriver, reach the tab to which the cable is attached and push to the left (towards the driver). You may need the help of another person. You pull the cable, and the assistant first presses the hood down, then raises it.
If the hood opens forward, in this case you have to tinker. You will need a homemade hook. You can get to the castle through the hood air intake. Remove it and hook on the cable through the grate. In some cases, you have to cut out one division, as narrow slots interfere with the work.
If it did not work out, then another way will help you. Raise the edge of the hood in the lock area. Pull out the sealing gum - you should get a gap. Then hook the cable with a long screwdriver or hook and the hood will open.
Causes of cable drive failure
A common cause of cable breakage is normal wear and tear. Over time, it stretches and frays at the bends. Lack of lubrication also greatly affects its service life.
If the lock and cable have not been treated with oil for a long time, then jamming occurs. The driver has to make a lot of effort to open the hood. As a result cable drive can't stand it.
Regularly check the condition of the lock and cable. At low temperatures they freeze. When you feel that the hood is difficult to open, identify the cause and fix the problem without waiting for a breakdown. If the cable still breaks, install a new one. Try to fix it securely without bending it. At the end, treat the lock with grease. After a job well done, you will forget about the problem with a broken cable for a long time.
Video: how to open the hood - VAZ 2108-2115
The VAZ-2109 car is full of surprises, so those who like to upgrade their favorite iron horse in the garage with their own hands will like the car. There are a lot of malfunctions during the active operation of the VAZ-2109, but there are also a lot of tuning options.
One of the breakdowns can be a break in the cable that opens the hood of the car. Until you fix this problem, the hood will remain idle in the closed position. The cable breaks more often in cold weather, unable to withstand low temperatures. Another reason for damage to its integrity is the wear of the part.
What to do if the cable broke in the cabin
A cable that allows you to open and close an important part of the VAZ-2109 is a stranded or single-core wire made of steel, placed in a sheath, with a metal braid on top of it. The main task of the cable is to open the hood when efforts are applied to the handle of the locking device.
To open the structure when the cable breaks inside the VAZ-2109, it is necessary to inspect and evaluate the area where the break occurred. Despite the breakdown, access to some details and areas has probably been preserved, and they should be studied. The study of the condition of parts near the hood begins with an inspection of the lock handle.
The mechanism for changing the position of the VAZ-2109 hood involves arranging the structure with a lock and a hook, the latter acting as a fuse against unauthorized opening of the hood. Details are placed in its front part. The manufacturer brought the handle into the cabin and built it in on the left right under the dashboard. Having seen the place of the cliff, you can proceed to further work.
Experts note several ways to open the hood with a torn cable at once. A rush inside the cabin allows you to solve the problem using pliers.
Using a tool, remove the remains of the torn part from under the panel, try to grab the edge of the rod, but do not touch the braid.
With an effort, pull the edge of the rod towards you, but at the same time keep the move smooth, do not allow sharp jerks. Otherwise, there is a high risk of a break in the cable in another place. If you want to make sure that the cable does not fall out of the pliers, make a loop at the end of the part and thread it through the tool.
If the cable broke under the hood of the VAZ-2109
There are times when the cable breaks at its location right under the hood. Then use this step by step guide:
- You will need a lift, overpass or viewing hole. If you have a jack, use it to secure the car in advance against falling from a height.
- When the machine is at the top, take on the removal of the protection suitable for the engine crankcase, it is fixed by several fasteners. Do the same manipulations with the tin boot, this will help free up space for further actions to open the hood.
- Place your palm into the hole located between the radiator and the engine compartment. Feel with your fingers the ring in which the thrust is fixed - the component is placed near the locking device.
- Reaching for the ring, pull it towards you with force and press it to the left, focusing on the door located near the driver. The hood should now open.
- If the manipulations did not give a positive result, and the hood is still closed, try also to press on the ring, press it well. To make the process go faster, it is advisable to enlist the help of another person.
- It remains to remove the torn cable and replace it with a new sample. The assistant must tighten the spring mechanism located at the lock, and the owner of the car at this time fixes the cable on the handle of the locking mechanism.
Alternative ways to open the hood of the VAZ-2109
Experts share additional ways to solve the problem of opening the hood of the VAZ-2109 due to a broken cable:
- Raise the hood of the car and use a long wire to open the keyhole.
- If you didn’t manage to open the hood with your own hands, you should contact a car repair shop, whose workers will do the job efficiently and quickly, besides, they will change the broken cable themselves.