Every car needs maintenance. It becomes no exception Hyundai Accent. Change engine oil necessary in the engine, according to the regulations every 12-15 thousand km. Of course, you can contact a car service, but you can carry out a shift and with my own hands in half an hour.
Video
The video will tell you how to properly change the oil on a car, and also talk about some of the nuances of the procedure
Replacement process
Replacement Hyundai oils Accent is carried out quite simply with your own hands. For the process to be successful, it is necessary to have minimal tools, as well as access to the vehicle from below.
When everything you need is collected, you can proceed directly to the process itself:
- First, you need to let the car cool down.
- We open the hood.
- To find a filter, you have to know design features. Access to the filter is closed by a lid, as is access to the drain neck.
- Remove the protective covers and find access to the oil filter.
- Open the access cover to the drain neck.
- Unscrewing it will pour engine oil.
- When the oil is drained, twist drain plug. To avoid smudges, it is necessary to replace the sealing ring.
Oil filter seat. Removing the filter will also spill some oil. Lubricate the O-ring of the new oil filter with oil.
- Before filling the oil, we replace the oil filter element.
Screw the new oil filter into place. When the oil stops dripping, wipe the drain hole and tighten the bolt.
- Go to engine compartment. To fill in engine oil, unscrew the filler plug.
Pour new oil into the engine. Screw on the cap and run the engine for a few minutes. Then check the oil level on the dipstick (top up if necessary) and make sure there are no smudges on the drain hole and oil filter.
After filling in engine oil, after 5-10 km of run, you need to look at the level. Add fluid if necessary.
Oil selection
Original number 0510000410 (4 liters, semi-synthetics, not for new cars), average price 1515 rubles. or 05100-00441 (4 liters, synthetics, mainly for new cars), the average price is 2076 rubles. For replacement, engine oil with a viscosity of 5W20, 5W30, 5W40 is used.
Replacement options:
- Aral 15503C - 2823 rubles.
- Shell 550046364 - 1779 rubles.
Oil and filter selection
The choice of a filter should be taken quite seriously, since it will depend on how well the engine oil will be filtered. For Hyundai Accent engines, Catalogue number will look like - 26300-35503. average price is 500 rubles.
Consider a list of analogues that can be used instead of a standard product:
Name | Catalogue number | Price |
Interparts filter | ||
Conclusion
Changing the filter and oil on a Hyundai Accent is quite simple on your own. To do this, you need minimal tools, as well as minor design skills. As for the choice of filter, it should be taken seriously, because how long it will last will depend on it.
A timely oil change in a Hyundai Accent engine is one of essential procedures during the next MOT. In such situations, drivers each time strive to find answers to the question of increased problematicness: “What oil is better to fill in the engine?”. There are several answers. To make a final and correct decision, it is necessary to carefully understand many subtleties.
Primary factors influencing the choice of oil
In most cases, the manufacturer provides accurate recommendations on which oil is needed for Hyundai Accent. The list of products that are optimally suited for the engines of a particular brand of car contains instruction manuals. According to these materials, it is better to fill in a lubricant with a viscosity index of 5W30 and 5W40 in Hyundai Accent car engines. When the engine overcomes the mark of 200,000 km, then in special cases 10W40 oil is suitable.
Factory instructions apply to a specific vehicle and are recorded in the owner's manual. However, in real conditions it is not always possible to strictly follow the manufacturer's instructions. Often there is a need to correct the data and independently solve the difficult question of which oil to fill in power unit car.
When choosing engine oil for filling in a Hyundai Accent engine, you will have to take into account a number of important indicators. These include:
It is advisable not to take these parameters into account separately, but to apply them in a complex manner.
Compliance with regulatory parameters
During the operation of the Hyundai car, it is necessary to monitor the level with strict constancy. lubricating fluid in the engine. As the oil decreases, its level must be restored by topping up. However, within the established regulatory deadlines, it will be necessary complete replacement used grease to new.
Carrying out this operation can be entrusted to the car service masters. Then they will be able to advise whether it is time to change the lubricant and what kind of oil to pour into the power unit. As a rule, several options are offered in such situations. The final choice will have to be made by the motorist on their own. More experienced car owners can do the replacement themselves.
In any case, it is important to know that you need to fill the engine with a new lubricant every 6000–7000 km. The manufacturer's manuals show off somewhat different numbers: 10,000–15,000 km. But you still have to take into account the factors due to which the oil loses its working properties. These include:
- seasonality of operation of Hyundai, taking into account temperature differences;
- driving style;
- the degree of daily engine loads;
- the duration of the engine during traffic jams;
- the quality of the road surface on which the car mainly moves.
These reasons can bring the timing of the next oil change closer, despite the mileage of the car. With intensive engine operation, it would be good to change the lubricant every 6 months.
When changing oil in a Hyundai Accent, it is recommended to use products with the following viscosity coefficients: 5W20, 5W30, 5W40. The manufacturer insists on just such a search order for oils. Each subsequent substance from this list can be used in the absence of the previous one.
Many motorists often complain that it is very difficult to get a branded oil product with a viscosity index of 5W20. Then it is appropriate to remember that golden mean closest to the truth. The manufacturer himself gives oil with a viscosity index of 5W30 second place. Forum users with experience admit that a lubricant with such indicators works great in the domestic temperature range.
Driving style also affects the selection of the right oil. A measured and calm ride allows the use of Leichtauf Special LL SAE 5w-30 with good anti-friction properties. Lubricating fluid confidently resists oxidation, contributes to fuel economy.
Active driving with elements of sports excitement is better combined with the addition of CeraTec anti-friction and protective additives. The substance was manufactured using a technology based on molybdenum compounds with an added ceramic component. The engine is provided reliable protection under intense and sudden loads.
The manufacturer recommends lubricants produced under the brands Aral, Liqui Moly, Mannol. Such motor oils are better suited for more modern power units. Lubricants of these brands enhance the resistance to oxidation of the base oil, have an extended service life until the next replacement, and contribute to fuel economy.
The use of marked lubricants does not violate the technological standards established by the automaker. A wide range for choosing oils indicates an understanding of the problems of motorists. The democratic care of the manufacturer is manifested through giving customers the right to choose. The main thing is that preferences are realized on the basis of certain knowledge and specific needs.
To prevent wear and ensure normal operation car engine the motor must use operating oil. If the consumable loses its properties, it will not be able to lubricate the rubbing parts and components of the power unit. In this article, we will talk about what kind of oil to pour into the Accent and what the do-it-yourself fluid replacement process is.
[ Hide ]
How often is replacement required?
In Hyundai Accent TagAZ 2004, 2006, 2007, 2008, 2013 and another year of manufacture, according to the recommendations of the manufacturer, it is necessary to change the lubricant with a run of 12-15 thousand kilometers. In fact, domestic experts recommend replacing the fluid in the car's engine at least every 6-10 thousand km.
There are a number of factors that cause a fluid to lose its performance:
- seasonality of using the machine, taking into account temperature changes at different times of the year;
- driving style - aggressive or gentle;
- the amount of loads that are placed on the engine;
- duration of operation of the power unit in traffic jams;
- the quality of the road surface;
- the volume of the power unit;
- engine number, as well as its year of manufacture.
These factors can reduce the service life motor fluid regardless of the mileage of the car. If the power unit operates in intensive conditions, then experts advise changing the oil every six months..
What is the best oil to use?
If you do not know which engine oil to fill in the engine Hyundai car Accent with mileage, you need to understand the products recommended by the manufacturer. Any oil that meets the viscosity characteristics of 5W20, 5W30, 5W40 is suitable for operation. This is the search order recommended by the vehicle manufacturer. lubricants. If it is not possible to find a product with a viscosity grade of 5W20, a 5W30 fluid can be used.
An important factor in the selection of a product is the style of movement. If you prefer a more relaxed driving style, experts recommend pouring Leichtauf Special LL SAE 5w-30 grease into the Accent 8 or 16 valves. This oil has high anti-friction characteristics. Under severe operating conditions, the lubricant prevents the formation of oxidation in the system and contributes to fuel economy. If you prefer a more aggressive driving style, CeraTec additives can be added to the powertrain. They are manufactured according to molybdenum-based technologies using ceramic components. The motor is provided with reliable protection when working in aggressive conditions.
The car manufacturer advises consumers to use Aral, Mannol and Liquid Moli oils. These products are ideal for use in modern engines. Lubricants enhance the oxidation resistance of base products and are characterized by extended service life. With proper engine operation, fuel economy can be achieved. It does not matter if synthetics are used or semi-synthetics.
The manufacturer Hyundai allows the use of fluids in motors that correspond to the ACEA C3 viscosity class:
- Shell Helix Ultra;
- Aral SuperTronik LongLife 3;
- Elf Solaris;
- Longtime High Tech;
- Midland Crypto.
User Evgeniy Sagaydak spoke in detail in his video about the choice of engine fluid for the Accent ICE.
Filter element selection
The oil filter also belongs to the category of consumables, it also needs to be changed. According to the manufacturer's recommendations, it is best to use original filter devices. They allow you to effectively clean consumables from impurities and contaminants, as well as wear products of the power unit. In the absence of original filters, it is allowed to install analogues.
We are talking about devices of brands:
- ALCO Filter;
- AMC Filter;
- Bosch;
- Ashika;
- blue print;
- champion;
- Fiaam;
- Fram;
- Filtron.
Level control and required volume
It is important to know exactly how many liters to pour into the power unit. If the amount of lubrication is insufficient, this will lead to malfunctions in the machine's motor. And an excess volume of liquid will cause the sealing elements and seals to be squeezed out. In addition, with an excess, the level of combustion of additives and lubricant additives in the internal combustion engine cylinders will increase. All unburned elements will eventually reduce the efficiency of the catalyst, settling on its internal surfaces. The exact volume filled into the motor is indicated in technical guidance to the car. How much car owners pour into an internal combustion engine depends on the year of manufacture, as well as the modification of the vehicle. On average, 4.3 liters is enough to fill the engine.
Fluid level control is performed on a cold engine. Open the hood of the car and find the probe for diagnostics, it is installed in a special hole on the cylinder block. Take it out and wipe it with a cloth, then put it back in and pull it out again. Ideally, the fluid level should be between the Min and Max marks.
Possible causes of oil consumption
What factors affect increased consumption motor fluid:
- Overflow of lubricant. This causes increased fluid flow. The ventilation system of the crankcase of the internal combustion engine will begin to squeeze out excess volume from the power unit.
- Leakage of grease from irregularities, as well as places damaged by corrosion.
- Constant operation of the car at high speeds, especially during the break-in of the power unit.
- Fluid inconsistency in viscosity class. If this parameter is too high, the combustion of the lubricant will be slower.
- Accelerated wear of the components of the power unit. Out of service oil scraper caps, gaps may appear on the valve sleeve and stems. Piston rings wear out, etc.
The main reason for rapid consumption is usually liquid waste. The more pistons in the internal combustion engine, the faster the unit will eat oil.
According to experts, one overheating of the machine motor can cause the unit to start eating grease.
One of the most serious problems- a leak. Fluid can leave the lubrication system from under the valve cover, cylinder head gasket, filler seal, drain hole. Often, grease leaves from under the camshaft and crankshaft oil seals, oil filter, or oil pan gasket. Leaks can be identified by visual diagnostics. If it was not possible to identify the cause by eye, then most likely the engine is eating lubricant as a result of wear on the piston rings or valve stem seals.
Do-it-yourself lubricant change
You can replace consumables yourself, without the involvement of specialists.
Tools and materials
What is required to complete the task:
- fresh motor fluid;
- filtering device;
- drain plug with sealing ring;
- wrenches for 17 and 19;
- special tool for dismantling the oil filter;
- star key set.
You can learn more about replacing consumables and a filter device from a video shot by user Andrey Florida.
Stages of work
Changing the working fluid in the Hyundai Accent power unit is performed as follows:
- Warm up the car engine. When the power unit reaches operating temperature, the viscosity characteristics of the lubricant decrease. The consumable becomes more liquid, which makes it easy to drain it from the motor.
- Drive the Hyundai Accent into a garage with a pit or onto a flyover. Stop the engine and let it cool down for about 15 minutes.
- Climb under the bottom of the car and find the drain plug. Waste fluid will come out of it. Substitute a container under the cork into which mining will merge. It can be an old bucket, a basin or a cut bottle. If the car is equipped with a pallet protection, it must be dismantled, to do this, unscrew all the bolts that fix it.
- Unscrew the drain plug and wait until all consumables have exited the system.
- Assess the condition of the drained consumable fluid. In the presence of serious dirt and deposits, as well as wear products, it is recommended to flush the power unit. Cleaning will require special remedy. Such oil can be bought at any auto shop. Screw in the drain plug and fill in the flushing agent through the filler neck, then start the engine and let it run. The time that the motor should run is indicated on the oil label. Drain the flushing agent from the lubrication system after cleaning.
- Install a new plug in the drain hole with rubber seal.
- Before pouring new fluid into the lubrication system, the filter device must be changed. Hyundai Accent can use two types of parts - replaceable and steel non-sectional. Replaceable filters are dismantled by unscrewing the screw located on the device case. When removing, it is recommended to visually inspect the replacement components. As for non-separable filters, they are unscrewed counterclockwise with a key. Remove the old part by unscrewing it counterclockwise. If problems arise during dismantling, use a special puller to remove it. This device is sold in any store. If you do not have a tool, you can use a piece of a bicycle chain by winding it around the filter housing. Alternatively, pierce the device with a screwdriver in a place closer to the bottom, away from the threads, so as not to damage the engine components. The tool will be used as a lever. Before installing a new filter, pour about 100-1500 grams of fresh oil into it and grease the gum near the thread with grease. Install the filter device, but do not overtighten it.
- Unscrew the filler cap and fill the system with fresh grease. It is convenient to use a funnel to add liquid to the power unit. Fill in the required volume of consumables, regularly monitoring the fluid level in the lubrication system using a dipstick. After filling, start the engine of the machine for a few minutes, let it run for idling. Stop the engine and check the oil level again. Add oil if necessary. Reinstall the engine undertray.
Everyone knows that after a while it is necessary to diagnose the car and replace lubricants. Otherwise, the main components of the car will quickly fail. If you are a happy owner of a budget Hyundai Accent, then you cannot help but worry about the following questions: what engine oil to pour into the Hyundai Accent engine and gearbox? How is the replacement done? Below is some basic information on these issues.
What kind of lubricant to pour in Hyundai Accent
Hyundai spends a lot of effort on the development and improvement of highly economical and environmentally friendly engines. In parallel with this, companies developing various fluids are improving lubricant consumables. So, Total strives to create lubricants that can be changed after a significant period of time.
Lubricant for the "heart" of the car
What engine oil can be poured into the Accent? For this brand of car, any engine oil is suitable that corresponds to the markings 5W-40, 10W-40 and 0W-30 of varying degrees of viscosity. All of these markings are available under the Total QUARTZ range. Each of them is designed for different operating conditions: Total QUARTZ 9000 5W-40 for standard moderate conditions, Total QUARTZ 7000 10W-40 for operation in the warm southern conditions of our country and Total QUARTZ 9000 Energy 0W-30 for cold northern regions.
What other engine oil can be poured into Hyundai Accent? It is impossible not to mention Castrol Magnatec here. It received top marks from API (American Institute) and ACEA experts. Its use allows you to slightly increase the maximum power and reduce fuel consumption.
Key rules for updating the lubricant in the "heart" of the vehicle
Replacing the lubricant in the engine with your own hands
To replace the lubricant in the engine, warm up the car and drive it into an inspection hole. Then open the grease filling compartment, and clean the oil pan from dust and dirt from the bottom of the car. Loosen the drain hole with a wrench and drain the used lubricant into a basin or container (4 l).
Draining used lubricant
Be careful not to burn yourself with hot oil. Within 10 minutes, the liquid should drain completely, then wipe the oil pan dry.
But that's not all. It is also necessary to drain the lubricating fluid from the oil filter. However, the tightening may not give in. In this case, use a special removable tool.
If there is none, you can carefully punch through the filter and unscrew it. Before installing a new filter, clean and dry the seat. At the same time, fill the filter up to half with engine oil.
After the oil filter in the engine is safely fixed in its seat, it will be necessary to pour about 3 liters of lubricating fluid into the hole specially provided for this and start the engine.
Then check for leaks next to oil filter and drain hole. If everything is hermetically sealed, they should not be. Also make sure that the oil control lamp in the car is not on (it may go out with a delay - this is normal). After that, turn off the engine and allow time (about 3 minutes) for the lubricant to drain into the oil pan.
Then you need to check the liquid level in the pan (do not forget to put the machine on a flat surface before this). Do this with a special probe. Wipe it first and re-insert it into the dipstick hole. Please note that it has an "F" mark (Full - full). You need to pour so much lubricant so that the fluid level is no more and no less than this mark.
It happens that during the diagnostics the emergency lamp does not go out. If this happens to you, stop the engine immediately. After that, check the lubrication level. If it is not enough, you need to fill it up to the norm. If fluid is present, the check sensor may be faulty.
Independent renewal of the lubricating fluid by the "semi-collective farm" method
Checking the oil level in the gearbox
Before checking the lubrication level in the automatic transmission with a dipstick, you need to warm up the car. To do this, you will have to drive 15-20 kilometers. Next, without stopping the engine, turn on the parking mode in automatic box gears. Remove the dipstick and wipe it dry, then check the level of lubricant in the automatic transmission. If she got to the “HOT” mark, then everything is in order with the oil, if not, it’s time to change.
If there is not enough fluid, air can enter the gearbox and foam the lubricant. This will lead to the fact that it will not sufficiently envelop the moving parts of the transmission, which will lead to their rapid wear and failure of the mechanism.
Replacement of automatic transmission fluid
Factory Manufacturer Hyundai recommends changing automatic transmission fluid every 4 years or 60,000 km, whichever comes first. Whether a lubricant change is needed will help determine the method described above. Usually, towards the end of its life, the car begins to make grinding sounds, and gears are shifted with difficulty. A good driver will not wait for such warning signs.
If a lubricant change is still necessary, you have a choice: completely drain the old lubricant and fill in new, or drain it halfway. The second option is simpler, and in the first case, you will need a hydraulic stand designed for this, which is connected to the automatic transmission cooling system.
You can simply drain the oil through the hole in the box below yourself at home, but in this case only a third of it will be removed. To completely drain all the grease and replace it with a new one, you will have to go to the service station.
And a little about the secrets of the Author
My life is not only connected with cars, namely repair and maintenance. But I also have hobbies like all men. My hobby is fishing.
I started a personal blog where I share my experience. I try a lot of things, various methods and ways to increase the catch. If interested, you can read. Nothing more, just my personal experience.
Attention, only TODAY!