From the article you will learn where the main brands of cars are produced Hyundai Creta, Solaris, Tucson, Santa Fe, Elantra, IX35, I40, which of them are produced at factories in Russia, and which in other countries, but for our country.
The geography of production is expanding
Long gone are the times when certain brands of cars were produced in any one country.
Previously, Audi was produced only in Germany, Chevrolet - in the USA, Peugeot - in France, and so on.
But the geography of production is expanding, new plants are being built in other countries, demand is growing and, as a result, sales volumes are growing.
This approach allows you to saturate the market and provide everyone with cars.
Below we will dwell in more detail on Korean Hyundai cars, which are produced in many countries of the world (including Russia).
General information about Hyundai Motor
Hyundai Motor Company is a South Korean automobile manufacturer with a wide range of the lineup and widely known throughout the world.
The founder of the concern is Chung Zhu-Yong. It was he who opened the company in 1967, which initially was only part of a large project, and in 2003 became an individual unit.
Initially, Hyundai Motor focused on cars, but only one was produced truck Ford.
Over the next thirty years, the company developed and expanded its scope of production. Already five years after the opening, the production of Hyundai cars started, and two years later the Hyundai Poini model appeared.
By the 80s of the last century, the production volume reached 50 thousand cars a year. In 1998, a significant event took place in the history of the company - Kia Motros was absorbed.
The name Hyundai is translated from Korean as "modernity". Actually, this word has become a motto for manufacturers who tried to embody new trends and trends in each model.
Sales figures
Hyundai Motor Company owns many car assembly plants not only in South Korea, but also in other countries of the world - the USA. Turkey, Czech Republic, Russian Federation, China and others.
Finished cars are distributed to thousands of car dealerships and sold to tens of thousands of people every day.
In 2010, the sales figure was almost 1.75 million cars, and the profit reached 32 billion.
In 2016, more than 145 thousand cars were sold (only in Russia). Generally speaking, this figure is ten times higher. On the territory of the Russian Federation, many models are assembled or were assembled - Sonata, Assent, Elantra, Santa Fe and others.
A major project was launched in 2007. It was then that it was possible to conclude an agreement on the construction of a Hyundai plant in St. Petersburg.
Already in 2010, the first cars rolled off the assembly line. The capacity of the plant was enough to produce about 200,000 cars annually.
In 2011, Solaris and Rio were assembled at the plant. Simultaneously with the plant in St. Petersburg, the production of component parts began, thanks to which already in 2010 Hyundai sales in Russia amounted to 87 thousand cars.
Hyundai Motor entered the hybrid market in 2004 with the introduction of the Click/Gets Hybrid.
A year later, the lineup was replenished with another "hybrid" - an offshoot of the Accent model.
Already in the first four years, about 800 Click hybrid cars were produced, and by the end of 2008, government agencies received about 3.4 thousand hybrids.
In which countries and where is the Hyundai Solaris assembled, factories in Russia
Hyundai Solaris is well known to domestic motorists.
Today it is produced in South Korea, Turkey, the USA and many other countries.
With the advent of the plant in St. Petersburg, it is also assembled in Russia. Before the opening of production, all lines were checked for the fact of the quality of the finished product and the absence of defects.
As soon as all the checks were completed, the production itself started.
Peculiarity Hyundai factory Motor in Russia is a responsible approach to production and strict adherence to technology.
This is not surprising, because more than half a billion dollars were invested in the construction of the site.
A little earlier, similar factories were built in a number of other countries - in the United States, Turkey, the Czech Republic, India and others.
main feature plant in the Russian Federation consists in a full production cycle, when the entire assembly process takes place on the territory of one country, starting with the production of spare parts and ending with the adjustment of the electronic components of the machine.
There are workshops on the territory of the plant where spare parts are manufactured, as well as welding, assembly and painting of the machine.
There is also a stamping workshop, in which special attention is paid to product quality.
An important feature of the Hyundai Motor plant in Russia is the emphasis on process automation. This figure reaches 80 percent, which allows us to speak with confidence about the quality and reliability of finished cars.
Few people know, but in the two workshops of the plant (painting and welding) people do not participate at all in the production process. All the work is done by the so-called "transformers" - robotic manipulators. By the way, this technique is also manufactured at the Hyundai factory.
An obligatory stage of production is the control line, where the machine undergoes quality control. When problems are identified vehicle sent for revision.
In 2016, the production of Hyundai Solaris in Russia was temporarily suspended, but, as company representatives assure, in March 2017, the Russians will be presented updated version car of the second generation - which will begin to be assembled at the same plant from January of this year.
In which countries and where is the Hyundai Greta (Creta) assembled, factories in Russia
The next model worthy of attention is the Hyundai Creta. Previously, cars were produced only for the Asian market, and production was established in India (Chennai city).
Already the first year of sales showed the success of the new model. Even before the start of the issue, the number of applications exceeded 70 thousand. In addition to Asia, Hyundai Creta is sold in South American and African countries.
Interestingly, the Indian plant was designed to produce no more than 7 thousand cars per month.
Due to such restrictions, buyers had to stand in queues for a long time, and the waiting time sometimes reached 6-8 months or more.
Not surprisingly, the issue of capacity expansion was given key attention. Already in the first year of production, it was announced about a future increase in the limit to 10 thousand cars per month.
As for the Russian market, Hyundai Creta appeared here later. Production has been established at the already mentioned plant in St. Petersburg. The launch of the first line started in August 2016.
From the assembly line, the cars enter the dealer network and are sold. The main difficulties are associated with the need to reconfigure the equipment under new model, because earlier at the plant on this line another model was produced - Solaris.
But now the production of Solaris has been moved to another, more advanced line (read above).
On average, the plant in St. Petersburg plans to produce 4-5 thousand cars per month. The total volume of Hyundai Creta cars that should roll off the assembly line is 200,000 units.
This is enough to cover the needs of not only Russia, but also neighboring countries.
It is worth noting that the Russian version of Hyundai Creta has a number of differences. The main feature is the adaptation of the car to Russian roads. This means that the ground clearance has been increased, a stiffer suspension has been installed.
There are restrictions in the choice of motors. Two engines are available for the Russian market - 1.6 and 2.0 liters. In this case, you can choose a full or front-wheel drive.
Read here detailed overview.
In which countries and where is the Hyundai Tussan assembled, factories in Russia
In recent years, crossovers have gained unprecedented popularity. They are roomy, have good cross-country ability, have a solid appearance and are very economical.
No wonder why each of the manufacturers wanted to snatch "a piece of their pie." The Hyundai company, which presented the market with a completely successful one, was no exception.
The car was developed on the basis of the famous ix35, released back in 2008. At the same time, manufacturers did not hide the fact that new crossover- just an enlarged version of a passenger car.
The clearance of the Hyundai Tussan is 18 cm, which is quite enough for our roads.
The issue of assembly deserves special attention. Today, the production of the model has been established in several countries - the Czech Republic, Turkey and South Korea.
There are large factories for the production of Hyundai cars in the United States, China and Mexico. By the way, some of the listed countries release Hyundai models are no longer engaged, but the factories still exist.
Crossovers come to Russia from a factory built in the Czech Republic. At the same time, the quality of the assembly of the car does not at all depend on the geography of production.
At each of the sites, strict quality control is carried out, which excludes the presence of defects.
In which countries and where is the Hyundai Santa Fe assembled, factories in Russia
It is not always clear where the car is assembled, because the last model update was seven years ago (in 2010). By the way, since that moment no significant changes have been made - only the appearance has been corrected.
For some period, Elantra was assembled for the Russian Federation and Europe in the Czech Republic (in the city of Noshovitsa).
The car was also produced in St. Petersburg. In 2009, the assembly of the "South Korean" was also established in Ukraine, at the Bogdan plant. At the same time, South Korea (Ulsan) still remains the main supplier.
It is from there that the car is sent to many countries, including Russia. By the way, in the period from 2000-2007, Elantra was produced in Taganrog ("Tagaz").
In addition to those already listed above, Elantra plants are located in Turkey, the Czech Republic, China, Brazil and India. But, the main supplier for Russia (with rare exceptions) is South Korea.
In which countries and where is the Hyundai IX35 assembled, factories in Russia
Hyundai IX35 is considered one of the most popular crossovers in Russia. For the first time, car sales started in 2009, and the first deliveries began a year later.
- L - Slovakia (Zilina);
- J - Czech Republic (Noshovice);
- U - Korea (Ul-San).
Korean car owners claim that the plastic in the car is softer.
As for the Hyundai IX35 from Slovakia, many complain about a large number of shortcomings in the bodywork.
In which countries and where is the Hyundai I40 assembled, factories in Russia
The Hyundai I40 is a bright representative of the D-class. In fact, this is a "purebred" Korean, which was released in 2011, and today is considered one of the leaders in sales (when compared with other models of the manufacturer).
By the way, the car appeared in the sedan body only a year later. Unlike many other models, Hyundai I40 is assembled only in South Korea, in the city of Ulsan.
Results
Thus, the production of Hyundai cars has been established in several dozen countries.
If we talk about Russia and the production of Hyundai for this country, the following points stand out here:
- South Korea, Ulsan. The largest plant, where 70 percent of all Hyundai cars for export are produced.
- The Taganrog plant (TAGAZ) assembled some Hyundai models until 2010.
- In 2008, the construction of its own car plant in St. Petersburg began, which began producing cars already in 2010. The plant is still in operation today. It is located in the Kamenka area.
- Turkey. It also houses a large Hyundai manufacturing plant. It has been operating since 1998 to the present day.
In addition to the countries listed above, Hyundai is going to China, the USA, the Czech Republic, Brazil and others. But cars from these states come to Russia less and less often or are not delivered at all.
The crossover segment is one of the most sought-after, and therefore competitive, niches in automotive industry, especially this type of body is valued in ours, where buyers like to get “more car” for less money. Today's realities are such that attractive interior and exterior design, all-wheel drive, rich equipment are not enough for car enthusiasts, they need something that anthological models from competitors have not yet offered. We tried to get to know the new generation Hyundai Tucson better and find out if this crossover has its own “zest” for which it will be bought. Certainly one of strengths of this model is its appearance, which combines sportiness and at the same time rigor, a kind of middle manager with an athletic build and an active lifestyle. You may have noticed that over the past few years, Korean Hyundai and KIA cars have received significant changes in appearance and are among the most attractive in their class. And all this thanks to the involved designer Peter Schreyer, who previously worked at Audi.
Appearance, as they say, is met by clothes ...
A distinctive design feature of the new generation of Tussans is a hexagonal grille with three horizontal stripes, which is connected to new and stylish LED headlights that extend onto the car's fenders. At the top of the headlights is a stylish strip that many confuse with daylight running lights, but in fact this is just a decorative element, the DRLs themselves are in the front bumper under the foglights. Moreover, their design differs depending on the sales market, in the American version they are located above the foglights and have the shape of a checkmark.
The Tucson looks bigger than it really is, thanks to swollen wheel arches and a massive front end with hood stampings. Thanks to the dimensions, the designers managed to make the appearance of the novelty swift and get rid of the “barrel shape”, for which many scolded the Hyundai ix35. And all this thanks to the fact that, compared with its predecessor, the 2016 model year has become longer, wider and lower. If you look at the crossover from the side, then because of the falling roofline, it seems that the car is ready to "jump", the same feeling is visually preserved when driving.
If the front part turned out to be memorable, then the back of the car looks very faceless, there is no detail in it that the eye would cling to. Personally, we were especially disappointed with the lanterns, it seems that they were not worked on at all, but taken from the Cerato model. Similar lamps can be found, for example, on Ford Kuga or Nissan Qashqai. And there’s nothing more to consider here, everything is like everyone else’s - a plastic bumper protection, a tailgate that opens up, and so on, perhaps the only thing that was done unusually is the twin pipes exhaust system hinting at a cocky character, although this does not surprise anyone today.
Salon, forget about cheap and hard plastic
Getting into the interior of the car, you immediately understand that the manufacturers paid special attention to its design, ergonomics and choice of materials. Tucson got rid of almost all the sores that the ix35 owners complained about so much. We devoted a whole separate one to the study of the interior, if you want to know about all the differences and innovations, we strongly recommend that you read it.
Let's start with the materials, the first thing you want to pay attention to is the presence of softer plastic, though not the entire interior is trimmed with it, but only those places that your hands reach during operation. The door lining itself, the lower part of the console and torpedoes, all this is still made of hard plastic, but this is due only to the class of the car in defense, we can say that competitors have the same thing, and some of them are worse. Potential owners can choose from a wide range of interior colors (black, beige and red) and materials, including leather. The selected material will be upholstered in the seats, the armrest insert in the doors and the armrests on the door handles. Separately, it is worth noting that the control unit for the central lock and power windows moved to the door handle, if earlier it was separate and too high, now everything has been done perfectly in terms of ergonomics. The instrument panel got rid of the wells and received a monolithic design, the drawing of the instruments themselves and the numbers does not cause any difficulties in reading. Depending on the chosen configuration, dashboard can be equipped with a small screen that displays indicators of the navigation system. Previously, one of the main troubles of the ix35 was the presence of uncomfortable seats with a short seat, in Tussan there is no such problem. The seats received an elongated seat, the company's desire to conquer the European market is affected, excellent lateral support, heating and ventilation, lumbar support and a wide range of adjustments. The center console has a new 8-inch touchscreen with the ability to display information, a new generation navigation system, the work of which, according to the representatives of the company, has become three times faster than that of previous version. The new navigation system comes with a seven-year free subscription to TomTom Live Services, including TomTom Traffic, speed camera locations.
The new Hyundai Tucson 2016 model year, in addition to all of the above, has become even safer, and this is not only due to the presence of modern security systems, but also due to the new body shape, which has significantly improved visibility. And perfectly adjusted ergonomics allows you to intuitively find one or another control key without being distracted from the road.
Passengers in the back row are not deprived of comfort, they also have the ability to adjust the angle of the seatback, move them forward and backward, and most importantly, the seats have a heating function. True, the seat cushions could be longer, because. on long-distance trains, passengers whose height is above average may get tired.
Despite the increased dimensions compared to the ix35, luggage compartment Toussaint, on the contrary, became smaller, this was done for the benefit of the interior space. Trunk volume Korean crossover is 513 liters, with folded rear seats you can increase the volume to 1503 liters, the indicators ai x 35 were 591/1436 liters. But it has become more convenient to load luggage, and depending on the equipment, it is possible to order a function that allows you to open the tailgate by swiping your foot under the bottom, where a special sensor is located, the same system, for example, is installed on the Ford Kuga.
Engine range, available transmissions and drive type
Tussan 2016 is equipped with an upgraded line of gasoline and diesel engines, which have become more economical, along with this, a new turbocharged gasoline engine has appeared, which is installed for the first time on a Korean SUV. Along with this, Hyundai Tucson offers the widest selection of transmissions among competitors, but all this in more detail.
The line of gasoline engines is represented by a 1.6 liter engine that produces 132 horsepower, it is installed on the basic versions of Tussan. The turbocharged version of the same engine is already capable of delivering 176 hp. The diesel range has a wider selection consisting of a 1.7 liter with 115 hp, a 2.0 liter with 136 hp and a top 2.0 but already at 185 Horse power.
- The new turbocharged gasoline engine provides a maximum torque of 265 Nm in the range from 1500 to 4500 rpm, the potential owner has the choice of transmission, either a 6-speed manual or a new robotic seven-speed gearbox with double clutch() with the ability to select manual mode.
Seven-speed dual-clutch transmission (7DCT) fitted to SUVs for the first time brands Hyundai. Due to the instant gear change, the driver does not feel shocks when changing them, the ride is more comfortable. Another indisputable advantage of a robotic transmission over a standard automatic transmission is lower fuel consumption, manufacturers claim that thanks to the 7DCT gearbox, fuel consumption has been reduced by 20%.
- The diesel 1.7 liter engine produces 280 Nm of torque in the range from 1250 to 2500 rpm, such a power unit is equipped exclusively with 6-speed mechanics and front-wheel drive;
- Less powerful version of 2.0 liter diesel engine develops 373 Nm at 1500 - 2500 rpm, a more powerful version produces under 400 Nm of torque available in the range from 1750 to 2750 rpm.
When developing the Hyundai Tussan, manufacturers tried to make their car economical and comfortable so that it could compete with European and Japanese models. At the same time, the front task was to make the car also manageable, if earlier the ix35, which was originally intended for the American market (by the way, in the USA the car was originally produced under the name Tycson) where rollability is preferred for the benefit of comfort, then the current generation, in its feeling, is closer to European models, on similarity Volkswagen Tiguan with precise steering. To do this, the Tucson is equipped with McPherson struts at the front and a multi-link at the rear. The chassis of the car allows you to feel confident at high speeds, and various systems such as Traction Control, ESC and electric power steering with new software also turn.
Let's answer a frequently asked question recently - where is Hyundai Tucson 2018-2019 assembled for Russia. Today, the production of the model has been established in several countries - the Czech Republic, Turkey, South Korea and even Russia itself.
Assembly place Hyundai Tucson in Russia
On the territory of the Russian Federation new hyundai Tucson has been assembled since August 2018 at the Avtotor plant. It was built in Kaliningrad in 1994. For the first time in the country, preparations for the production of this model began in June 2016 and lasted the whole summer. All this time, employees of the Kaliningrad plant were trained in assembly by Czech colleagues. Together, the manufacturers managed to develop an optimal modification Hyundai car Tucson for Russian roads.
Recall that cooperation between the automaker of South Korea and Russia began in 2011. Avtotor assembled the first trucks. Two years later, the first cars were put on the conveyor. At this time, Avtotor launched the Equus and i40 models into the series. After another two years, the plant began to produce a model.
In May 2016, the range of cars produced at Avtotor was replenished with Santa Fe and Genesis models.
The third-generation Hyundai Tucson crossover began to be produced on car factory Avtotor since September 2016. Previously, this model was not produced in Russia. Within two years, Avtotor produced more than 30,000 Hyundai Tucson cars.
findings
The country where the assembly is made does not affect the quality of the car. Quality control is established everywhere, and it excludes the presence of marriage. Do you agree?
Now you know where Hyundai Tucson 2018-2019 is assembled for Russia. Write your opinion below in the comments, whose assembly you prefer, and whether the manufacturer's country affects the quality of the produced car.
More recently, in 2015, the South Korean automaker Hyundai Motor Company released the third generation of its Tucson compact crossover. And the new SUV was to the taste of motorists, at the same time revealing a number of shortcomings, the elimination of which became the main goal of restyling. To maintain the achieved level of sales and build on the success, some changes were required, as a result of which an updated SUV appeared.
"Hyundai Tussan" 2017, description of the restyled model
Externally, the 2017-2018 Hyundai Tucson crossover has acquired more aggressive features, confidence and a sporty character.
Hyundai Tucson 2017 If you review the photos of the updated and pre-reform Tussan car, you can find the following changes in the exterior of the new model:
- the radiator grille has become a little larger in size, the width of its chrome-plated crossbars and rim has increased;
- the front bumper acquired a relief with spectacular stampings of ribs, as if flowing along the contour of the car, and modified fog lights organically fit into the overall design of the front of the car along with thin strips of LED running lights;
- received a larger volume and the hood of the car, and the side surfaces of the body;
- new head optics has become slightly convex and elongated;
- the slope of the front pillar was made smaller, which improved the aerodynamic characteristics of the car body;
- the stern of the crossover has changed, on which a massive tailgate appeared, as if cutting wide and long taillights in half.
Front panel Hyundai Tucson 2017 The interior of the restyled Hyundai Tussan, having retained the classic corporate identity, has become more modern and interesting. Its basis is:
- ergonomic comfortable chairs with electrically adjustable lumbar support;
- heated three-spoke leather-wrapped steering wheel with multiple function keys and aluminum insert;
- 4.2" color display on-board computer on the digital dashboard;
- a completely new, redesigned center console, with an 8-inch navigation system screen located in the upper part, deflector wings and a climate unit with automated air conditioning;
- premium audio system Infinity;
- air ducts with deflectors for the second row of seats;
- soft high-quality finishing of door cards and instrument panel.
Trunk Hyundai Tucson And in the cabin of the restyled Hyundai Tucson car, it has become much more spacious due to the fact that its wheelbase has increased.
Important! The updated crossover Hyundai Tucson 2017 is equipped with the most modern means and systems that ensure safety, for which it received five stars according to the results of the EuroNCAP test.
Specifications SUV "Hyundai Tussan" 2017
The Hyundai Tucson 2017 crossover is produced with the following types of engines:
- 1.6 GDi petrol engine with 132 hp. s., 192 Nm;
- a two-liter 2.0 MPi engine with a capacity of 149.6 horsepower, with a torque of 192 Nm;
- gasoline turbocharged engine with direct fuel injection 1.6 T-GDi with a capacity of 177 liters. with.;
- 0 CRDi (185 hp, 400 Nm) - diesel, real consumption which per 100 km is 6.4 liters in the combined cycle, acceleration to "weaving" in 9.5 seconds, and maximum speed 201 km/h
All these powertrains can be paired with three types of transmission 6-speed manual transmission and automatic transmission, or robotic seven-position DCT dual-clutch gearbox.
Under the hood of a Hyundai Tucson 2017 Among other technical characteristics of the restyled Hyundai versions Tucson 2017 can be called the following parameters:
- fuel consumption 6.6–8.4 l/100 km for different types engines;
- acceleration from 0 to 100 km / h 9.1–11.5 depending on the power unit;
- maximum speed 182–201 km/h;
- overall dimensions 4475 x 1850 x 1655 mm;
- wheelbase 2670 mm;
- magnitude ground clearance or ground clearance 182 mm;
- car weight for different trim levels 1501–1854 kg;
- trunk volume 488 (1478) l.
Complete set of the car "Hyundai Tussan" 2017
The updated Hyundai Tucson 2017 SUV is available in 3 trim levels and 11 equipment levels. The main equipment of the car is:
- Comfort - basic, which has five levels of equipment (two gasoline engines or diesel, front or four-wheel drive and any of the three types of transmission);
- medium equipment - Travel with four options technical equipment, assuming big choice units with different performance characteristics;
- top-end Prime equipment, which has two modifications - with a 2.0 MPi 2.0-liter engine and automatic transmission for 6 positions, as well as a 1.6 T-GDi engine and DCT transmission, both units run on gasoline.
Hyundai Tucson Night 2017 The basic "Comfort" configuration includes the installation of the following equipment:
- airbags in the amount of 6 pieces;
- cruise control;
- manual adjustment of the steering wheel in height and angle of departure;
- LED DRL and foglights;
- 17-inch light alloy wheels;
- leather-trimmed steering wheel and gear knob;
- fabric upholstery;
- standard audio system with 6 speakers;
- trip computer;
- external folding mirrors with electric drive and heating;
- rear parking sensors;
- heated rear and windshield;
- rain and light sensors;
- two-zone climate system with a cooled box;
- heated front seats.
In the updated Hyundai Tussan 2017 crossover, equipped to the Travel level, in addition to the basic set of equipment, the following are installed:
- rear view camera;
- 8-inch touchscreen navigation;
- chrome grille;
- leather interior trim, which looks pretty solid in the photo of the salon;
- front sensors for the car parking system;
- 4.2-inch display between speedometer and tachometer;
- second row seat heating system;
- LED head optics.
The composition of the main equipment of the car Hyundai Tucson 2017 of the Prime configuration includes, in addition to the basic equipment:
- front seat adjustment drive and ventilation;
- rear block lights on LED elements;
- a system that provides control over blind spots;
- electric drive for opening and closing the tailgate;
- car valet.
As additional equipment in complete set of Hyundai Tucson Prime can be ordered panoramic roof with a sunroof, twin exhaust pipes, as well as metallic or mother-of-pearl body color.
Test drive Hyundai Tucson 2017
The first impression of a driver getting behind the wheel of the updated 2017 Hyundai Tussan crossover is that this is not a Korean SUV, the interior of the cabin is so well made, where one can note high ergonomics and plenty of space both in the front row of seats and in the rear seats.
Having traveled on a restyled model off-road and on roads with good coverage, we can state the following:
- a very well matched tandem gearbox and engine, which provides decent dynamics and good economy;
- interior insulation is also at a decent level, at a fairly high speed, the engine is barely audible;
- handling in normal mode, when traveling around the city is excellent, but on the highway, at high speed, there is not enough communication with the car, there is a lack of reactive action on the steering wheel, which is associated with the settings of the power steering;
- the SUV is equipped with all modern security systems, which greatly facilitates the driver’s control, but even with the stabilization system turned off, the car is completely controllable in a controlled skid;
- off-road patency of the Hyundai Tussan crossover is also quite good, with diagonal hanging, the electronics work clearly, transferring torque to the wheels that have traction.
In general, we can say that the restyling of the third-generation Tucson SUV turned out to be quite successful.
Prices for the car "Hyundai Tussan" 2017
Sales of the updated version of the compact SUV Hyundai Tucson 2017 started on Russian market back in February this year. Many adherents of this model are interested in the question of where this car is assembled for Russia. Unfortunately, "Tussan" will not be able to buy a domestic assembly, which could reduce its cost. New crossovers made in South Korea itself, Turkey, and for the most part in the Czech Republic enter our market.
To date Hyundai price Tucson 2017 official dealers in Russia the following:
- a car in the basic Comfort package costs, depending on the equipment of its power units, the type of transmission and drive, from 1,505,900 to 1,803,000 rubles (the most cheap crossover Tussan has a 2-liter, 149-horsepower engine, 6-speed automatic transmission and front-wheel drive);
- in the Travel configuration, a restyled SUV today costs 1,733,000–1,993,000 rubles;
- you can buy the most complete car according to the Prime version today for 1,913,000 or 1,978,000 rubles.
Rear view of Hyundai Tucson 2017 "Hyundai Tussan" 2017, reviews
According to the reviews of owners who have already managed to buy and use a compact Hyundai crossover Tucson 2017, we can conclude that they liked the car. Among its advantages, many note:
Education: Samara Road College. Telecommunications and electronics engineer. Driver of the second category / car mechanic. Skills for repairing domestically produced cars, chassis repair, repair brake system, gearbox repairs, bodywork…
It is worth noting that the procedure for preparing the production of a car at facilities located in Russia lasted throughout the summer. At the same time, only all-wheel drive versions of the car will be produced in Russia.
Exterior Hyundai Tucson 2016
Automobile Russian assembly will not differ in external indicators from a crossover made in the Czech Republic. It is worth noting that the Hyundai Tucson 2016 has a stylish modern exterior - a flattened grille with a corporate logo in the center, elegant headlights, and narrow LED running lights.
On the side, the car is distinguished by stylish stamping and smooth lines of the body.
Engine
Currently, six versions of the crossover are produced at the plant in Kaliningrad, differing in different technical specifications. Unites modifications only one thing - they are all-wheel drive.
Thus, in Russia, the production of Hyundai Tucson 2016 with a 2-liter atmospheric gasoline power unit, issuing 149 hp and working in tandem, both with automatic and mechanical box gear shifting, a 2-liter turbocharged "diesel", issuing 185 hp. power and aggregated with automatic transmission, as well as a 1.6-liter gasoline engine producing 177 hp. and paired with a 7-speed automatic transmission.
Hyundai presence in Russia
It is worth recalling that 2016 became the sixth car of the well-known Korean manufacturer, produced at the facilities of the plant based in Kaliningrad. Hyundai Equus and Hyundai i40 were the first cars to be produced at the plant in Russia.
After the successful release of these models, the Koreans have established Russian production executive sedan Hyundai Elantra, which is popular not only in its homeland and in the Russian Federation, but also in other developed countries of the world.