If non-standard wheels are installed on the car, this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. That's why, correct selection wheels are an important element.
Wheel bolt pattern
On the Kia Rio different generations used different wheels. Usually this information is indicated in the service book, or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires fit.
Characteristics
Consider the wheel bolt pattern for Kia Rio according to the manufacturer's data by year of manufacture and generation:
Wheel disk.
Disc size | Disk offset | Sverlovka | Tire size |
|
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R13 before |
||||
175/70R14 before |
||||
Disk Options Kia Rio:
PCD 4×100 diameter 13 to 15, width 5J to 6J, offset 34 to 48. Similar to Honda Fit III (GE) 1.2 2018. Tire sizes from 13 to 15, width from 175 to 195 and profile from 60 to 70. Minimum tire size: 185/65R13, maximum: 185/65R15.
Wheel breaking.
Conclusion
As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore a car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.
Kia Rio cars have been in constant demand and popularity among Russian motorists for more than fifteen years now. Thanks to democratic pricing policy of the manufacturer's company, good technical characteristics and attractive appearance, in the Kia car dealerships of our country there are even queues of buyers who want to become Rio owners.
There is nothing surprising in the fact that every owner of Kia Rio wants to distinguish his car from thousands of others. by the most in a simple way to do this is to replace stock drives.
How to determine the parameters of the wheels of Kia Rio
When choosing new wheels for your Rio, first of all, you need to pay attention not to their appearance, but to the parameters that they must meet. In principle, there is nothing complicated here, since all disks have a standard marking. So, for example, cars Kia Rio 2013-2016 years have discs in the database, whose marking is as follows 6J (disc width) R15 (disc diameter) PCD 4x100 (number of holes, the diameter of the circle along which their centers are located) ET48 (removal of the disc, mm) DIA54.1.
Wheel bolt pattern
The bolt pattern of standard Kia Rio discs can be determined even by a novice driver. All Rio models have 4 of them. You can measure the center-to-center distance of the holes using a caliper. Next, simple calculations are carried out that allow you to get the PCD parameter, which in fact is called the bolt pattern.
Kia bolt pattern Rio III(UB) 1.6 CVVT (123 hp, petrol) 2012-2016. Kia bolt pattern rio 2018
Dimensions of wheels and rims for Kia Rio All wheel parameters: PCD, offset and rim size, drilling
Kia Rio YB 2018-2019
Sedan
Hatchback 5d
Kia Rio YB 2017-2019
Sedan
Hatchback 5d
Kia Rio UB 2011-2017
Sedan
Hatchback 5d
Hatchback 3d
Kia Rio JB 2005-2011
Sedan
Hatchback 5d
Kia Rio DC Facelift 2002-2005
Sedan
Wagon, 5d
Kia Rio DC 2000-2002
Sedan
Wagon, 5d
razmerkoles.com
Rim bolt pattern for Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) (2012-2016)
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
Find rim parameters Kia Rio III (UB)
Model release Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) was carried out from 2012 to 2016. Table of factory and suitable bolt patterns wheels for Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline).
- LZ (number of holes)
- ET (disc offset)
- DIA (hole diameter)
| 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
razboltovka.ru
Wheel bolt pattern Kia Rio I (DC) 2005 1.5 (95 hp, petrol)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, petrol)
- 2005 onwards
Find wheel parameters Kia Rio I (DC) 2005, 1.5 (95 hp, gasoline).
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 model (95 hp, gasoline) - 2005
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible |
razboltovka.ru
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 2004 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible |
razboltovka.ru
Wheel bolt pattern Kia Rio I (DC) 2003 1.5 (95 hp, petrol)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, petrol)
- 2003 onwards
Find wheel parameters Kia Rio I (DC) 2003, 1.5 (95 hp, gasoline).
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 model (95 hp, gasoline) - 2003
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible |
razboltovka.ru
How to bolt the wheels of Kia Rio with your own hands
Kia Rio cars have been in constant demand and popularity among Russian motorists for more than fifteen years now. Thanks to the manufacturer's democratic pricing policy, good technical characteristics and attractive appearance, queues of buyers who want to become Rio owners line up in Kia car dealerships in our country.
There is nothing surprising in the fact that every owner of Kia Rio wants to distinguish his car from thousands of others. The easiest way to do this is to replace the stock drives.
How to determine the parameters of the wheels of Kia Rio
When choosing new wheels for your Rio, first of all, you need to pay attention not to their appearance, but to the parameters that they must meet. In principle, there is nothing complicated here, since all disks have a standard marking. So, for example, 2013-2016 Kia Rio cars have discs in the database, whose marking looks like this: 6J (disk width) R15 (disk diameter) PCD 4x100 (number of holes, the diameter of the circle along which their centers are located) ET48 (disc offset, mm) DIA54.1.
Wheel bolt pattern
The bolt pattern of standard Kia Rio discs can be determined even by a novice driver. All Rio models have 4 of them. You can measure the center-to-center distance of the holes using a caliper. Next, simple calculations are carried out that allow you to get the PCD parameter, which in fact is called the bolt pattern.
autokia.net
Wheel bolt pattern for Kia Rio I (DC) 2002 1.5 16V (98 hp, petrol)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2002 onwards
Find wheel parameters Kia Rio I (DC) 2002, 1.5 16V (98 hp, petrol).
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2002
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 16V (98 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 16V (98 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 16V (98 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 16V (98 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 16V (98 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible |
Razboltovka Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. What a mess on kia rio 2018
Razboltovka Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. Razboltovka kia rio 2018
Dimensions of wheels and rims for Kia Rio All wheel parameters: PCD, offset and rim size, drilling
Kia Rio YB 2018-2019
Sedan
Hatchback 5d
Kia Rio YB 2017-2019
Sedan
Hatchback 5d
Kia Rio UB 2011-2017
Sedan
Hatchback 5d
Hatchback 3d
Kia Rio JB 2005-2011
Sedan
Hatchback 5d
Kia Rio DC Facelift 2002-2005
Sedan
Wagon, 5d
Kia Rio DC 2000-2002
Sedan
Wagon, 5d
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
- LZ (number of holes)
- ET (disc offset)
- DIA (hole diameter)
| 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
Wheel bolt pattern Kia Rio I (DC) 2005 1.5 (95 hp, petrol)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, petrol)
- 2005 onwards
Find wheel parameters Kia Rio I (DC) 2005, 1.5 (95 hp, gasoline).
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 model (95 hp, gasoline) - 2005
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible |
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Permissible | |
| Kia Rio I (DC) 1.3 (82 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 5 |
website
Bolt pattern is an important value for Kia Rio rims
A bit of history
Kia is a Korean automotive brand. The company produces a wide range of vehicles, from compact hatchbacks, solid sedans and ending with minibuses and full-fledged buses designed for urban transportation. One of the popular car models produced under this brand is Kia Rio.
This machine first appeared on the European market in 2000. To date, 3 generations of this car have been produced. The first is in station wagon and sedan bodies. After 3 years, KIA RIO leaves the assembly line in an updated form. The headlights have been changed. In addition, the car gets improved soundproofing and front brakes.
In 2005, the second generation of this car was released. In 2010, the brand begins cooperation with a famous German designer. Almost everything changes in the car: the radiator grille, bumpers, steering wheel, several new colors appear, the length of the car increases, etc. Since 2010, Kia Rio has been assembled in Kaliningrad.
The third generation of the car was released in March 2011 on the platforms of 2 Hyundai models - Solaris and i20. In Russia at that time they plan to release a special model of KIA RIA. It will be presented to potential buyers in August 2011. base car for this novelty was the Chinese car KIA K2, which was fully adapted for use in Russian conditions. Models of this machine, released in 2013 and 2014, received new body.
Today Kia Rio is one of the most popular cars in Russia with an affordable price and excellent quality. Therefore, many motorists choose this particular car for themselves. The machine is the most practical and sold in its class. Due affordable price the sales level of this car model is at the highest level. Kia owners Rio often tunes their car, paying special attention to replacing regular wheels and tires.
What is a breakdown?
It would seem that there is nothing complicated in this process: it is enough to remove regular disks and replace with new ones. But in fact, not everything is so simple. Bolting disks and replacing them is a very long and laborious process, especially for those who have never dealt with these.
The discs are attached to the wheel hub using bolts or spokes (certain parameters play a huge role in this - the size and weight of the disc). So, for light-alloy products, spokes are used, thanks to which the wheel is perfectly fixed. Bolt discs also differ in the number of holes. At the same time, the marking says 05/112. This inscription indicates that there are 05 holes located on a circle whose size is 112 mm.
For different brands of cars, these parameters will be different. In their absence, the bolt pattern can be done on your own.
Important! The bolt pattern of a disk with an odd number of fasteners is calculated using a certain formula. You will need to measure the distance between the bolt holes. Next, multiply the resulting value by a coefficient, which for 03 fasteners is 1.55, and for 05 - 1.701.
How to perform disk bolting?
So, where to start the procedure for bolting disks for Kia car Rio? This can be done in several successive steps:
- Determine all significant technical parameters of the wheels. The choice of disks is a responsible task. Here you need to pay attention not only to the external attractiveness of the wheels, but also to other characteristics, in particular, to the bolt pattern. But first you need to determine what sizes and markings of disks you need.
But in principle, no confusion should arise, since all disks have a standard marking corresponding to their parameters. All discs have the same standards. All the necessary indicators for Kia Rio of various modifications can be found on the Web.
So, for example, car kia RIO 2013 and 2014 release has the following marking - 6J R15 PCD 4x100 ET48 DIA54.1. This combination provides the owner of the KIA Rio with the fact that the width of the wheel disk is 6 inches and the diameter is 15 inches.
The next combination of letters and numbers - PCD 4x100 - European marking, which indicates the number of holes and the diameter of the circles. These parameters are the bolt pattern, i.e. Rio has 4 bolts that are 100 mm in diameter.
When installing a new disk, special attention should be paid to such a parameter as disk overhang. This parameter is no less important than wheel bolt pattern. If the new disk will have a negative value, then during various maneuvers (sharp turns) the wheels will protrude outward. If this value is too high, the disc cannot be installed. Therefore, wheel offset is one of the most important indicators.
The disc offset for Kia Rio is indicated by the following marking - ET48. If the planes of the disc surface coincide with its center, such an indicator as the offset is 0. By European standards, the Kia Rio has a positive offset precisely at a distance of 48 mm.
- Determine the breakdown. You can do this on your own using one of the proposed methods:
- If you are going to buy new discs, just take with you the old models that need to be changed. Compare disk sizes.
- Measure the distance between the fasteners with a special measuring tool. This is an extreme option for those who do not have old disks.
How to determine the standard sizes of tires and wheels?
Define standard sizes disks and tires on Kia RIO, for example, the 3rd generation do not need to have special skills or abilities. When purchasing tires for this machine, it is important to know parameters such as bolt pattern and offset. This vehicle produced since 2011, it is equipped with discs of two radii - R15 and R16. It all depends on the configuration of the car. Some put low-profile tires with a diameter of R17.
For cars manufactured in 2010, tires with a rim diameter of R14, R15, R16 are suitable.
Important! The tire sizes for a car of this model are: for R15 - 185/65, and for R16 - 195/55. If you decide to purchase non-standard tires, then the deviations in the diameter of the wheels should be minimal, and the bolt pattern should in any case be suitable.
If you need any help in determining the bolt pattern, then it is better to immediately entrust this matter to specialists. They will help you determine the diameter, tire size, wheel offset and other parameters of interest for cars manufactured in 2002-2014.
How to choose wheels and which ones are better to buy? Answer in this video:
ilovekiario.ru
distance and number of wheel bolts
Each driver seeks to stand out from the gray mass, spending little money. Shallow tuning involves minor changes in the appearance of the wheels, plastic hood and glass deflectors, and the application of stickers. Owners who decide to change will need to select and buy new wheels that fit the Kia Rio.
Choice
Parts differ in size and location of bolts. Arriving at the store, contact the consultant - he will select the disks of suitable parameters.
Kia owners Rio of any generation will need a 4 to 100 bolt pattern - quite common, sold in almost every automotive store. Even more common is a bolt pattern of 4 to 98, it fits VAZs of all generations up to new Lada Vesta and Lada X-ray.
In no case should you confuse the details - the holes simply will not fit.
After choosing the bolt pattern of the rims, you will need to decide on the diameter. In the vehicle's owner's book, suitable sizes. The extra inches of discs give a strong resistance to the engine, it will overheat, and fuel consumption will increase.
Optimal for Kia Rio is 15-16 diameter. Some owners put 17, but with low profile tires.
The next indicator is the width. The Kia Rio arches are designed for a width of 185–195. Deviations from these numbers will affect the technical specifications indicated in the vehicle passport.
If the appearance of the car is not particularly important to you, then you can choose wider and larger wheels, but you will have to fill in more fuel and carry out technical inspections more often.
The last thing the owner chooses is the shape and color of the pattern. In this case, there is nothing to advise - the choice is yours.
Coloring
Sometimes the color of the wheels does not suit the car or does not suit the owner. Usually discs are painted in standard shades - black, white, and rarely painted in others. Disks are gaining popularity, in which there is a strip 5–10 millimeters thick in a bright color along the rim.
The discs you like are easy to paint on your own or in the service.
There are two types of painting: powder and acrylic. The first is better, but you will need special equipment to heat the powder to the right temperature. The advantage of this method is that the metal is painted when heated, and when it cools, the paint is firmly fixed on the material.
Acrylic paint gives the same effect, but a number of operations will be required during preparation. What paint will be on your discs is up to you. Powder can cover only the entire surface with one shade, acrylic - several colors at once.
Once you have chosen the wheels for your Kia Rio and painted them, it's time to start installing. At this point, you need to be extremely careful not to scratch the details - when the key flies, it can cause serious damage. Many owners also paint the bolts, in which case the details look even more beautiful, but when installing it is better not to damage the paint on the bolts themselves, otherwise the work has been done in vain.
Conclusion
Sometimes car owners want to stand out from the gray mass and improve the appearance of the car, for example, they replace and paint wheels. driving performance declared by the manufacturer.
kiario.pro
What is the bolt pattern of the discs on the Kia Rio - Kia Rio disc bolt pattern
Wheel bolt pattern Kia Rio I (DC) 2004 1.5 (95 hp, petrol)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, petrol)
- 2004 onwards
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 model (95 hp, gasoline) - 2004
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern for Kia Rio II (JB) 2007 1.4 16V (97 hp, petrol)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, petrol)
- 2007 onwards
Table of parameters and wheel bolt patterns for Kia Rio II (JB) 1.4 16V (97 hp, gasoline) - 2007
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 2000 1.5 16V (98 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2000 onwards
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2000
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern for Kia Rio II (JB) 2008 1.4 16V (97 hp, petrol)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, petrol)
- 2008 onwards
Table of parameters and wheel bolt patterns for Kia Rio II (JB) 1.4 16V (97 hp, gasoline) - 2008
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 2001 1.5 16V (98 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2001 onwards
Table of parameters and bolt patterns for disks of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2001
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio II (JB) 2009 1.4 16V (97 hp, gasoline)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, petrol)
- 2009 onwards
Table of parameters and bolt patterns for Kia Rio II (JB) 1.4 16V (97 hp, gasoline) - 2009
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 1.5 16V (98 hp, petrol) (2000-2005)
moykiario.ru
The choice of wheels for the Kia Rio of the second and third generations, the correct selection of tire and wheel dimensions, bolt pattern, manufacturer with photo and video
The Kia Rio car has been one of the best-selling cars in its class in Russia for several years now. Then insert your hand and pull the right mirror on the Kia Rio towards you. It has gained considerable popularity among motorists with modern technical specifications, the level of equipment and comfort, reliability and unpretentiousness, as well as, of course, appearance and price. I must say the popularity of the car is not limited to Russia and the CIS countries, it is successfully sold in South Korea, European countries, USA and others. Indeed, Rio of the second and, especially, third generations have become one of the most commercially successful cars of the brand. At present, one of the important characteristics of the car can be considered handling, appearance and fuel consumption. Which wheels to put on a Kia Rio cost 195 \ 55 p16 which instead of them you can put these expensive ones and the size is not running How to remove the cigarette lighter on a KIA RIO It is they who are more influenced by which wheels are installed on the car. In some situations, clutch adjustment is considered justified on Kia Rio 2012. spark plugs on Kia Rio 3 and other generations should be changed during other maintenance work, namely every 8–9 thousand. Wheels on KIA Rio 2015 By choosing the right wheels for Kia Rio 2 and 3, you can significantly improve these and some other characteristics.
Kia Rio with stamped wheels and plastic caps
In addition, the choice of wheels will somehow affect the following qualities of the car:
- Controllability
- Braking distances
- Driving comfort level
- Service life of suspension parts and tires
- Acceleration dynamics
- Fuel consumption
The wrong choice of Kia Rio wheels can negatively affect any of these characteristics, as well as lead to a significant increase in financial investments in the car.
Wheel sizes Kia Rio second and third generation
Rio wheel size consists of two component sizes rim and tires. When choosing both of them separately, you should keep this in mind. Also, if deep tuning is not planned, you need to use what the manufacturer recommends. When using wheels and tires recommended by the manufacturer, the full realization of the car's capabilities is guaranteed, as well as the maximum compliance with the declared characteristics in any traffic situation. What wheels can be put on KIA RIO On the other hand, the use of wheels of other sizes can lead to poor handling, reduced suspension life, incorrect speedometer readings and other problems.
The main parameters indicated by the marking of rims are the width of the rim, its diameter, as well as the bolt pattern. To choose the right disk for Rio, you need to know how to decipher the designations of its sizes. Let's take an example:
Standard size wheel rims for Kia Rio 2 (2005-2011) 5.5Jx15, where the first digit indicates the width of the rim of the disk (the place with which the tire will be in contact) in inches, and the second is the diameter of the disk also in inches.
Tires are usually marked as follows: 195/55R15. Adjusting and replacing the clutch on the KIA Rio It is this type of marking that is usually placed on the outside of the tire. The first digit in it indicates the width of the tire in centimeters, the second is the percentage of the profile height to the width, the third is the diameter of the disk for which it is intended.
The wheels of the Kia Rio 3 have similar characteristics to the wheels of a second-generation car, however, their exact dimensions depend on the modification and configuration. This refers to the wheels and tires installed on new cars at the time of sale. How to remove a cigarette lighter on a Kia Rio 2012 video Avto Moto Blogger Subsequently, they can be changed to those that have the desired characteristics or appearance.
Alloy wheels for Kia Rio and Hyundai Solaris "KiK" 13067 Replica (Azbuka Autospare Parts Ostrogozhsk)
THANK YOU FOR VIEWING, LIKE AND SUBSCRIBE! Article: 13067 Series: Replica Diameter: 15 Rim width: 6.0
YST R15 rims for Hyundai Accent, Solaris, Kia Rio, etc.
Completed order Wheels YST R15 on Hyundai Accent, Solaris, Kia Rio, etc. * The official VoKoleso app for Apple
You can also put wheels on the Kia Rio bigger size e.g. 205/55 R16. There is a set winter tires on regular disks kia rio 2010. But without making changes to the design of the arches, it is most likely impossible to do here. Although it is not always necessary to delve so deeply into the design of a car. Sometimes it is enough to put fender liner for which the tires will not cling when the steering wheel is fully twisted to the side and on uneven roads. In the existential or the store, say that you need the original for the Kia Rio and that's it. The size of the Kia Rio wheel is determined based on the possibilities of seats in the arches.
New wheels for Kia Rio
It must be remembered that for the Kia Rio, a wheel size larger than recommended by the manufacturer can cause deterioration in dynamics, a decrease in suspension life and incorrect speedometer readings.
Wheel bolt pattern Kia Rio
Wheel bolt pattern Kia Rio important parameter which allows you to select wheels on the car. It shows how many studs the wheel is attached to, the diameter of the holes for them and how they are located. How to adjust washer nozzles windshield on Kia Rio. Which wheels to put on a Kia Rio cost 195 \ 55 p16 which ones to replace them. Studs to which nuts are attached rim are usually located on the hub and their number on cars from 4 to 6. It is important that the holes in the disc are the same diameter as the diameter of the studs and their number is the same. In addition, you need to take into account other parameters associated with the bolt pattern, such as the overhang and thread of the fastener. The offset of the disk directly affects its choice for a particular car model, and the fastener thread is needed for the correct selection of the conical centering nuts that fasten the wheels to the Rio. New Kia Rio cars are usually fitted with Kumho Solus tires at the factory. The wheel bolt pattern must correspond to that declared by the manufacturer, for Rio it is 4 & 100 with a hub hole 54.1 offset ET 46 and fastener thread M12x1.5. This means that the wheels are mounted on 4 bolts located on a circle with a diameter of 100 mm. For what kia wheels Rio choose to a large extent affects not only them. The use of a different bolt pattern on the Kia Rio is not allowed for safety reasons. Video How to remove the cigarette lighter on KIA RIO Here it must be said that the wheels on cars of the third generation (2011, 2012, 2013, 2014, 2015, 2016 onwards) in terms of fastening do not differ from the second generation (2005-2010 onwards) , so the bolt pattern is the same.
If it becomes necessary to put wheels that do not fit the standard hubs, you can use wheel spacers:
Wheel manufacturers
Which Kia Rio wheels to choose is largely influenced not only by their size and bolt pattern, but also by the manufacturer. The range of prices for new tires and wheels is very large, and it is not always easy to determine the quality and compliance with the characteristics of a particular brand. To give preference to a particular company, you need to understand in which segments it operates, what products it offers and its reputation in the market. In general, the most famous manufacturers use the latest technologies in their products, which allows them to achieve the best results in many characteristics of car wheels and tires. Usually the prices for such wheels are much higher than average, but this does not mean that in the average and even budget price categories You can't find good value for money deals. En: what wheels to put on a Kia Rio cost 195\55 p16. Today, some Russian brands offer a wide range of tires for cars, and there are good brands and successful models that have managed to gain popularity and a good reputation among motorists. News How to remove a cigarette lighter on a Kia Rio 2012 video In addition, there are many Chinese companies on the market that offer products that are quite capable of competing with inexpensive brands. I must say that both of them use advanced technologies, often acquired from well-known companies, and quality control, which allows them to bring truly competitive products to the market.
If conditionally divided into groups of manufacturers of automotive rubber, two main segments can be distinguished:
Companies with a worldwide reputation, whose products are sold in many countries and are in great demand:
Russian or Chinese companies offering high quality products:
New Kia Rio cars are usually fitted with Kumho Solus or Hankook Optima tires at the factory. Both options meet the highest modern safety requirements, and in tests they even show results that surpass some of the more expensive models. To replace them, you can choose Nokian Hakkapelitta 5 as showing excellent results in handling and braking on cars of this class in urban conditions. But this is not always feasible, therefore, on the Kia Rio, replacing spark plugs is possible after. As winter tires, you can purchase, for example, Cordiant Polar 2, showing nice results in decline stopping distance, handling and durability.
Of course, this is not full list brands, in addition to those listed here, there are other equally well-known ones, among the products of which you can find great options. In this case, you should use a rule that will help you not to buy a fake: always buy wheels in specialized stores from reputable suppliers who provide all the necessary information and documentation for the purchase. By following it, you will protect yourself from the troubles associated with the purchase of low-quality goods and will be confident in the adequate behavior of the car in any road conditions.
5net.ru
Wheel bolt pattern Kia Rio: description, characteristics
If non-standard wheels are installed on the car, this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. Therefore, the correct selection of wheels is an important element.
Wheel bolt pattern
On Kia Rio, different wheels were used in different generations. Usually this information is indicated in the service book, or technical documents of the car. Also, each vehicle has a plate that says which wheels and tires are suitable. 
Kia Rio.
Characteristics
Consider the wheel bolt pattern for Kia Rio according to the manufacturer's data by year of manufacture and generation: 
Wheel disk.
Disc size | Disk offset | Sverlovka | Tire size |
|
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R14 before |
||||
175/70R13 before |
||||
175/70R14 before |
||||
Parameters of disks Kia Rio:
PCD 4×100 diameter from 13 to 15, width from 5J to 6J, offset from 34 to 48. Similar parameters to Honda Fit III (GE) 1.2 2018. Tire size from 13 to 15, width from 175 to 195 and profile from 60 up to 70. Minimum tire size: 185/65R13, maximum: 185/65R15. 
Wheel breaking.
Conclusion
As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore a car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.
koreanautoreview.com
Rim bolt pattern for Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) (2012-2016)
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
Find rim parameters Kia Rio III (UB)
The release of the Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) model was carried out from 2012 to 2016. A table of factory and suitable wheel bolt patterns for Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline).
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
Surely you will agree that the car will look much better if it has wheels of the original design. That is why many motorists seek to replace regular disks with others - more advanced and attractive. However, in this kind of tuning, you need to carefully approach the technical parameters of the wheels. The main characteristic that you need to pay attention to is bolt pattern. In this short article, you will learn the bolt pattern rims popular Kia car Sid of different years of release.
Almost the first cars we saw mass production and fell in love with the domestic motorist. They were produced with two wheel diameters:
The above data refer to machines that are equipped with engines:.
Drilling Kia Ceed 2010
This year the car was subject to modifications and some changes. Cars of this period are quite popular and common in the territory. Russian Federation and not only.
Completed this year with the following wheels:
- R15 with tire size 195/65, while the offset of the disk is 47 mm., And its size is 15x5.5.
- R16 with a tire size of 205/55, while the offset of the disc is 51 mm., And the size is 16x6.5.
The above data also applies to models that are equipped with engines: 1.4L; 1.6 CDRI; 1.6L; 2.0L crdi.
All other variants were produced with the following characteristics:
- Wheel size 15x6.0, offset 45mm, tires 185/65R15;
- Wheel size 15x6.0, offset 45mm, tires 195/65R15;
- Wheel size 15x6.0, offset 45mm, tires 205/60R15.
For all specified configurations bolt pattern is 5×114.3
Drilling Kia Ceed 2013
The line has improved, but the production of cars this year was made with only two engine options:
- Kia Sid 1.4
- Kia Sid 1.6
The first option was equipped with wheels with a disc size 15x6.0, departure 45 and tire size 195/65R15.
The second option is the size of the disk 16×6.5, departure 46 and tire size 205/55R15.
Both configurations have a bolt pattern equal to 5 × 114.3.
It is worth noting that all cars of this model of different years of production have the same drilling (5 × 114.3), so it is almost impossible to make a mistake in its selection. The only thing you need to pay attention to is the tire sizes and other parameters.