Cars from Honda, one of the world's largest automakers, traditionally rank at the top of reliability ratings. The company is considered progressive in terms of engineering developments, engines with a variable valve timing system VTEC, which combine impressive dynamic performance with fuel efficiency, are widely known. In addition, Honda was among the first to develop hybrid technology and was the first among all automakers to launch in mass production FCX Clarity hydrogen fuel car.
TOTAL QUARTZ 9000 FUTURE GF-5 0W20
For Honda models, originally designed for American or japanese markets, oils with ILSAC system approvals are most often recommended. Engine oil for Honda TOTAL QUARTZ 9000 FUTURE GF-5 0W20 was created specifically for the latest ILSAC GF-5 standard and is perfect for Japanese cars. When tested to meet the GF-5 specification, this oil has shown outstanding results in a number of ways. In particular, the wear of engine parts was below the standard by 70%, and fuel consumption by 3.1%.
In addition, the phosphorus content of the formulation has been reduced to meet GF-5 requirements, extending the life of exhaust aftertreatment systems and reducing CO, NOx and hydrocarbon emissions. TOTAL QUARTZ 9000 FUTURE GF-5 0W20 is recommended as an oil for Honda cars of the following models:
- Accord 2.0/2.4 for Russian market since 2003
- Civic 2001-2005
- Fit for the Russian market since 2008, Fit 1.5 since 2003
- crosstour
- Petrol CR-V 2002-2007, FR-V 2004-2007
- Stream, Airwave, Vamos, Vamos Turbo
TOTAL QUARTZ INEO FIRST 0W30 and TOTAL QUARTZ INEO ECS 5W-30
Modern diesel vehicles particulate filter(DPF) require the use of Low SAPS engine oils with a reduced value of sulphated ash content, and a low content of phosphorus and sulfur. TOTAL QUARTZ INEO FIRST 0W30 and TOTAL QUARTZ INEO ECS 5W-30 oils fall into this category and meet the ACEA C2 and C3 standards. These oils are highly protective and economical and are suitable for Honda diesel vehicles with diesel particulate filters of the Civic, Accord, CR-V and FR-V models. In addition, it is recommended to use TOTAL QUARTZ INEO ECS 5W-30 as an oil for Honda Civic 9th generation gasoline engines where API SM is required.
Sooner or later, any engine will require an oil change to keep it running. The effective operation and service life of the motor depend on the quality of this product and the frequency of its replacement. Many users prefer to watch a video on changing motor lubricant and limit themselves to this. However, it would be quite useful to get acquainted with the recommendations, which detail the important points on the engine oil change process for the Honda SRV model line.
How to choose a quality product
From right choice engine oil for Honda CR-V directly depends on the functioning of the most important automotive unit. The manufacturer's service manuals recommend that the Honda CR-V be used with API SJ, API SM, API SL engine binder.
The lubricant in the Honda engine is used from energy-saving varieties. The oil must comply with the quality classes defined by the official API - SAE tests. This fact is recorded on the labels as a round graphic sign, which indicates:
The latest lubricant products are marked with another important symbol - STARBURST ("Starburst"). This mark is awarded exclusively to energy-saving oils of the highest quality with easy fluidity. By finding the appropriate video, you can visualize all the necessary information.
To ensure acceleration and up-to-date dynamism of the Honda CR-V, the manufacturer recommends using ACEA A1 and ACEA A3 rigid class lubricants in the engine. For fuel efficiency, maintaining elastic-lubricating properties in conditions high temperatures and shear rates are prescribed fluids with particularly low viscosity. It can be synthetics labeled 0W-20 or 5W-20. It is the second figure that indicates the low viscosity of the oil, which ensures its efficient pumping through microchannels.
When Honda SRV runs impressive distances (150,000 km), it is better to use lubricants with a higher viscosity - 5W-30 or 10W-30. When the operation of the engine approaches the mark of 250,000 km, owners and service masters advise switching to 5W-40 or 10W-40 oils.
When choosing engine oil for a Honda car, you can build on the following data:
- year of issue;
- modification of the Honda CR-V;
- body number;
- Catalogue number consumables according to the corresponding article.
In addition, the change of lubricant in the engine is adjusted to the specific operating conditions and the general condition of the Honda CR-V. Examples of how these criteria are taken into account can be found in the videos dedicated to 2008 cars.
Replacement intervals
The new Honda SRV comes with a specially formulated engine lubricant. The manufacturer strongly recommends that this oil not be changed until the scheduled replacement after the vehicle has been broken in. Therefore, it is not necessary to change engine lubricant immediately after purchasing a new car. The preservation of the factory substance will ensure the naturalness, uniformity of wear (lapping) of moving parts.
At normal conditions operation in gasoline engines, the lubricant should be changed after 12 months or 10,000 km, whichever comes first. If the operating conditions for gasoline engines equated to severe, then the indicators should be halved - up to 6 months or 5000 km. If the Honda engine was equipped in 1999 and subsequent years, then engine lubricant can be changed after 12 months or 15,000 km.
Changing the lubricant in diesel engine subject to the same regulations. User-provided videos clearly illustrate the difference between heavy and normal operating conditions.
In order to increase the motor resource and maintain the functional suitability of expensive parts, the lubricant must be replaced at reduced intervals. Therefore, in real operating conditions, the Honda CR-V motor oil it is advisable to change every 5000-7000 km.
We put the original filter
The 2008 Honda CR-V oil filters use a specially designed paper that has a variable density. It is folded in a complex way, providing a large filtration area with the highest possible efficiency. Separate sections of these filters trap particles whose size does not exceed 6 microns. The main area delays contamination of 20 microns. Reliable operation of the device ensures the duration of maintenance-free operation of the engine.
Original oil filters are equipped with an O-ring. This type is more effective than the usual gasket, which has a flat configuration. The Honda CR-V oil filter, due to the O-ring, gets tight contact between the base and the engine.
The anti-drainage valve plays a special role in the filter element. This part prevents the oil from flowing back into the crankcase from the filter. So engineering solution managed to solve the main problem when starting the engine: starting with a "dry" scrolling of rubbing parts in the initial critical period is unlikely.
The Honda oil filter is also equipped with a bypass valve. It opens in cases where the filter is clogged, its throughput drops. The valve opens automatically to relieve excess pressure. Such a system provides the proper level of engine protection, allowing lubricant to enter hard-to-reach places.
Original oil filters for Honda are available in 2 main modifications. They differ in size and performance. Most cars are equipped with filters based on the development of 1988. These parts are bulkier, less efficient.
Now the filter of the latest brand ACURA RSX/CIVIC 2001 has replaced the obsolete units, which is distinguished by its compact size and improved qualities of the cleaning element. The latest modification The filter contributes to the creation of high oil pressure in the Honda engine.
Non-original oil filters allow smudges at the junctions with the engine. Such filters "stick" to the motor part. They are difficult to remove when replacement is required. Numerous videos demonstrate the differences and advantages of the original filters.
Self-lubrication change
Replacing engine lubricant and oil filter in Honda car CR-V can be made by hand. You should prepare in advance for this procedure. You need to familiarize yourself with the textual materials that describe the replacement of the motor substance. Step by step instructions in video format will also be a good help in theoretical preparation.
Tools and materials
Changing the engine lubricant and oil filter will require:
The better and more thoroughly the preparatory stage is carried out, the easier and faster it is to replace the filter and the used motor substance with a new one.
We carry out replacement qualitatively and quickly
Do-it-yourself replacement of the old motor substance on a Honda CR-V car, choosing a convenient place for this procedure. A flyover, a garage equipped with a viewing hole, a lift are suitable. In the most extreme cases, a flat area will do, on which it will be convenient to put the car on a jack.
- The engine is allowed to cool down for 20-30 minutes. It is necessary to ensure that the engine does not become completely cold, otherwise not all the liquid will be able to flow out of it. But even from a too hot engine, it is not worth removing the lubricating fluid.
- Climbing up from the bottom of the car, they find drain plug.
- A container is placed under the drain hole to collect the old lubricant.
- With a 17 wrench, unscrew the drain plug. Extreme care must be taken not to burn yourself with hot oil.
- It is necessary to wait 30–40 minutes for the waste substance to glass into the prepared container.
- In order not to waste time, unscrew oil filter. You can use a special or gas key.
- A new one is installed in place of the removed old gasket.
- 100 g of new motor lubricant is poured into a new filter element. She also smears the gasket.
- A new filter is installed, the drain plug is screwed.
- The filler cap is unscrewed, the right amount of lubricant is poured in. Its sufficient level is controlled by the dipstick.
After a short test drive, inspect the bottom of the car for the presence of a leak. Check the fluid level in the engine. If necessary, add the required amount of lubricant. More replacement videos motor fluid built on the example of a 2008 car modification.
Honda CR-V began its history in 1995 and two years later was introduced to the domestic market. Constant technical updating of the model maintains the stable popularity of this model among motorists. For all time, more than 10 types have been released power plants adapted to different regional conditions. At the same time, the most unpretentious and reliable engines of this concern are the motors installed in models 1995 - 2002 of release.
A lot depends on what kind of engine oil to fill in the internal combustion engine. The same lubricant different motors can show a completely opposite effect, and even cause an engine breakdown, in which the permissible parameters differ from the characteristics of the substance being poured. In the rating below, you can get acquainted with the best products of different brands, which, in their parameters, are suitable for use in Honda CRV engines.
Best Synthetic Oil for Honda CR-V
This category of oil compares favorably with other types of engine lubricants, having best parameters to work in modern motors. They do an excellent job with oxidative processes, temperature extremes, and harsh operating conditions. They do not age, and during the entire period of use they do not lose their qualities, providing engine parts with reliable protection against friction.
5 Eni i-Sint 0w-20
Optimum protection under high loads
Country: Italy
Average price: 1372 rubles.
Rating (2019): 4.5
Surprisingly, Eni i-Sint 0w-20 is practically never found on the fake market, and if there is, then their number is at the level of statistical error. At the same time, engine oil from the Italian concern has a number of characteristics that distinguish the product from its competitors. Suffice it to say that the oil price segment is one of the most demanded. At the same time, the conditions under which the Honda TsRV engine operates do not affect the stability of the lubricant and its viscosity.
Detergent additives are responsible for the absence of carbon deposits and deposits, and the service life can be easily extended - the oil does not age much longer than standard drain intervals (10 thousand km). Interesting reviews are left by Honda CR-V owners who use the product in winter - starting is not at all complicated by low temperatures. The surface tension of the oil film does not allow the lubricant to drain into the sump during downtime. At the time of the plant, all friction pairs are pre-provided with a sufficient amount of engine oil.
4 Motul 8100 Eco-nergy 0W-30
Best oil film strength
Country: France
Average price: 3910 rubles.
Rating (2019): 4.6
Motul 8100 Eco-nergy 0W-30 engine oil can be poured into Honda SRV engines, although some users insist on the opposite. There are numerous reviews of the successful use of this product, and those that testify to many years of successful experience in operating motors with this lubricant. The oil perfectly tolerates temperature loads, has high washing characteristics and reliably protects parts from friction.
Moreover, this protection is so effective that it literally stops the wear of nodes subject to critical loads. It's all about the best surface tension. The oil film is so strong that it does not break under loads, and at the time when the Honda TsRV engine is turned off, it remains on the rubbing parts without draining into the sump. Needless to say, it makes it easier to start the engine, especially in cold weather. The price, however, bites, but for many Honda owners CR-V, wishing to increase the resource of the motor, such expenses look quite reasonable and reasonable.
3 IDEMITSU Zepro Eco Medalist 0W-20
The most effective additives
Country: Japan
Average price: 2550 rubles.
Rating (2019): 4.7
Modern energy-saving oil is perfect for Honda CRV engines latest generations with a range of up to 100-150 thousand km and minimal wear. Becoming constantly filled with this motor lubricant, the owners noticed a slowdown in the wear processes in the motor. Cylinder-piston group and camshaft due to the presence of organic molybdenum in the oil and high washing characteristics of the product received reliable protection against friction, regardless of the nature of operation and ambient temperature.
In the reviews of some Honda SRV owners, the conditions for a successful engine start are outrageous for many other oils (the thermometer dropped to the very bottom, close to -50 ° C!). In addition to almost the most ideal adaptation to Russian conditions, this engine oil demonstrates an excellent price advantage compared to the original lubricant. At the same time, both brands are produced at the same plant in Japan, and according to their basic characteristics differ from each other no more than Siamese twins. In any case, almost none of the owners of the Honda CR-V who began to pour this engine oil into the engine (we are talking about the original product) were not disappointed.
2 MOBIL 1 ESP X2 0W-20
The most economical oil. Manufacturer Approved
Country: Finland
Average price: 3245 rubles.
Rating (2019): 4.8
A distinctive feature of the oil is the low content of harmful compounds in exhaust gases, which does not lead to contamination of particulate filters. When conducting maintenance work upon their regeneration, the owner can expect a pleasant surprise - no need to clean. This feature of the Mobil 1 esp is confirmed by the reviews of the owners of the Honda SRV, who became eyewitnesses of the above fact.
The purity of the lubrication system, of course, will be an order of magnitude higher than the filter, and this is completely independent of the nature of the engine operation. Engine oil is excellent at resisting corrosion, oxidative reactions, and has virtually no flow (unless it leaks through leaky gaskets and seals). Retaining its properties throughout the entire working period, the lubricant saves fuel perfectly, allowing you to reduce its consumption by a record value of 2.3% (this figure also depends on the characteristics of operation).
1 HONDA ULTRA LEO 0W20 SN
The requirements that this API grease meets significantly exceed the oil tolerance for all gasoline engines installed in the Honda CR-V, which means that it can be safely poured into the internal combustion engine of this model with any year of manufacture. Developed specifically for Honda, the eponymous grease is of high quality, has energy-saving properties and provides high quality lubrication of moving parts of the engine under heavy loads and at the same time reduces fuel consumption.
The minimum proportions of phosphorus and sulfate ash content and high temperature stability prevent oil consumption for waste and the formation of deposits in the lubrication system. The reliability of this product is confirmed by numerous reviews. They also note the high frost resistance of Ultra leo during winter operation, providing easy start of the engine in frosts to -37 °C.
The best semi-synthetic oil for Honda CR-V
Recently, this category of oils began to include liquids obtained using the same technology as a fully synthetic product. They have similar performance characteristics, do not age too quickly - in short, they behave like synthetic ones, and at the same time they are cheaper. Of course, there are differences, but they are so insignificant that they make it possible to successfully use this lubricant in modern cars, including the Honda CR-V.
5 ENEOS Super Gasoline SL 5W-30
Best price
The country: Japan (manufactured in South Korea)
Average price: 1350 rubles.
Rating (2019): 4.5
Pleasant cost for Honda CR-V owners is far from a good reason for choosing. Although this, of course, matters, especially for car owners who have run more than one hundred thousand. The reason that forced this oil to be poured again and again into Honda TsRV engines is stability and resistance to temperature extremes, enviable for many competitors. This does not pass without a trace, especially for motors operating in urban environments.
The reviews noted such positive changes in the operation of the engine as a reduction in noise and vibration, an increase in acceleration dynamics, and even efficiency. In many ways, these miraculous changes for worn aggregates are due to the better surface tension of the film and molybdenum disulfide. The first provides the best conditions for starting the engine, and the second - levels out rough wear marks, filling in the scoring that appears and wear in friction pairs. The choice in favor of ENEOS Super engine oil, according to those who made this decision, was generously rewarded by extending the life of the engine.
4 SHELL Helix HX7 5W-30
Excellent aging resistance
Country: Netherlands
Average price: 1421 rubles.
Rating (2019): 4.6
The oil is very popular in the domestic market, and it can be poured into Honda CR-V engines of previous generations with decent mileage. However, there are limitations - you need to have a strong confidence in the originality of the product, because there are counterfeit products on the market, and in quite a serious amount. Fake oil can be purchased even in a large retail chain (there are reviews with such a sad experience) - in this case, the sellers were let down by the supplier.
Natural lubricant SHELL Helix HX7 5W-30 does not age prematurely, and can reliably serve to lubricate the engine for up to 6.5-7 thousand km. During operation, carbon deposits do not form, and the oil film reliably protects parts in all operating modes, and this is confirmed in the reviews of the owners. City traffic jams or high-speed driving when using the Helix HX7 does not harm the motor at all. The main thing is timely replacement.
3 MOBIS PREMIUM GASOLINE 5W-20
Stability under temperature loads
Country: South Korea
Average price: 1,355 rubles.
Rating (2019): 4.7
Developed for cars of South Korean manufacturers, this oil can easily be used in Honda CRV engines, which have a variable valve timing system (VTC). By the way, even in the very first generations of this model, the K20 and K24 engines were installed, which already had this system. The high-quality base stock and modern highly active additive components are the best suited for modern power-intensive engines, having increased resistance to thermal stress.
The energy-saving properties of this oil provide more economical operation, reducing not only fuel consumption, but also the lubricant itself, which lasts until the next change without topping up. Most of the reviews characterize Mobis premium with positive side. The oil copes well with any operating load, has good fluidity, a long duty cycle and has proven itself to be a very frost-resistant lubricant, providing easy engine starting in severe frosts.
2 LIQUI MOLY Special Tec AA 5W-30
The most reliable motor protection
Country: Germany
Average price: 2707 rubles.
Rating (2019): 4.7
One of the few motor oils that is recommended for use in Asian car engines, and Honda SRV belongs to this category. Deep distillation made it possible to achieve the ideal purity of the base lubricant, comparable to more expensive synthetics. The best ability of the product to suppress oxidative processes prevents deposits in the engine, and detergent components effectively dissolve existing sludge or varnish deposits.
If you pour Special Tec AA into the Honda TsRV engine on an ongoing basis (it can be used all year round, with the exception of regions with the most severe winters), reliable friction protection will be provided. Judging by the reviews, there is a reduction in noise and vibration, and a stable viscosity in any operating mode ensures careful use of the engine resource. It is also noted that the properties of engine oil are preserved throughout the entire operating cycle - it does not age before replacement.
1 HONDA ULTRA LTD 5W30 SN
Wide operating temperature range. Reliable protection from friction
Country: Japan
Average price: 2970 rubles.
Rating (2019): 4.9
Derived from hydrocracking technology, this engine oil is not much different from pure synthetics, but has a slightly higher viscosity. This is the best fit for Honda motors CR-V, with high mileage and, therefore, engine wear to varying degrees.
The manufacturer guarantees the high performance of the lubricant in any temperature conditions, which allows it to be used throughout the year. With a significant cleaning effect, engine oil keeps the internal cleanliness of the engine. At the same time, a pronounced viscosity stability is manifested, which provides a dense oil film on the rubbing parts of the motor. Even when the engine is idle, this film does not collapse, and provides lubrication to rubbing surfaces in the first seconds after starting, until pressure appears in the system.
Experienced owners of the popular Honda crossover CR-V certainly knows what engine oil is right for their car. Someone is guided by theoretical knowledge, and buys analogues, while someone prefers only original oil, the quality of which cannot be doubted. In any case, every Honda CR-V owner should know a little bit of theory in order not to make a mistake in the future. In addition, today there are many high-quality analogues that are no worse than more expensive original products. In this article, we will consider original and similar oils, as well as parameters for them. Recommendations are given separately for each Honda CR-V model range with 2.0 and 2.4 liter petrol engines.
1 generation
Now consider the choice of oils by type, season and brand. Below are recommendations for Honda CR-V from 1995 to 2004.
Year of release - 1995
SAE standard:
- Universal - 10W-30, 10W-40, 5W-40
- Winter - 5W-30
- Summer - 20W-30, 25W-30
API Standard - SH
- Top Brands – Mobile, Kixx, Valvoline, Consol, G-Energy
Year of release - 1996
SAE viscosity standard:
- Universal - 10W-30, 10W-40
- Winter - 5W-30, 5W-40
- Summer - 20w-40, 25W-30
API Standard - SH
- Type - semi-synthetic, mineral
- Top Firms – Rosneft, Consol, G-Energy, Valvoline, Kixx
Year of issue - 1997
SAE standard:
- Winter - 5W-30, 5W-40
- Summer - 20W-40, 25W-30
API Standard - SJ
- Type - semi-synthetic, mineral
- The best firms are Mobile, ZIK, Lukoil, Rosneft, Mannol, Valvoline
Year of issue - 1998
SAE standard:
- Universal - 10W-30, 15W-40, 15W-30
- Winter - 5W-30, 5W-40
- Summer - 20W-40, 25W-30, 25W-40
API Standard - SJ
- Type - semi-synthetic, mineral
- The best firms are ZIK, Lukoil, Kixx, Xado, Valvoline
Year of release - 1999
SAE standard:
- Universal - 10W-40, 15W-40, 15W-30
- Winter - 5W-30, 5W-40
- Summer - 20W-40, 20W-30, 25W-40
API Standard - SJ
- Type - semi-synthetic, mineral
- The best firms are ZIK, Lukoil, Lotos, Rosneft, Mannol, G-Energy, Kixx, Valvoline
Year of release - 2000
SAE standard:
- Universal - 10W-30, 10W-40, 15W-40, 15W-30
- Winter - 5W-30, 5W-40
API Standard - SJ
- Type - semi-synthetic, mineral
- The best brands are Mobile, Rosneft, Lotos, Mannol
Year of release - 2001
SAE standard:
- Universal - 10W-30, 10W-40, 15W-40, 15W-30
- Winter - 5W-30, 5W-40
- Summer - 20W-40, 20W-30, 25W-30, 25W-40
API Standard - SJ
- Type - semi-synthetic, mineral
- The best firms are Mobile, Lotus, Mannol
Year of release - 2002
SAE standard:
- Universal - 10W-40, 5W-40
- Winter - 5W-40, 0W-30
- Summer - 20W-40, 25W-30, 25W40
API Standard - SH
- Type - semi-synthetic, mineral
- The best firms are Mobile, ZIK, Lukoil, Rosneft, Valvoline
Year of issue - 2003
SAE standard:
- Universal - 15W-40, 10W-40, 5W-40
- Winter - 0W-30, 5W-40, 5W-30
- Summer - 20W-30, 20W-40, 25W-30
API Standard - SJ
- Type - semi-synthetic, mineral
- The best firms are Mobile, Lukoil, Rosneft, Valvoline, Consol
Year of release - 2004
SAE standard:
- Universal - 10W-40, 5W-40
- Winter - 0W-30, 5W-40
- Summer - 20W-40, 25W-40
API Standard - SL
- View - semi-synthetic
- The best firms are Mobile, ZIK, Lukoil, Rosneft, Valvoline, Consol.
Second generation, model year 2002-2006
- The selected oil must meet the API SJ or SL parameters
- Available viscosity characteristics:
- 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40 - at temperatures of minus 30 degrees and below, as well as at +40 degrees and more;
- 10W-30, 10W-40 - for temperature ranges from minus 20 to +40 degrees and above
- 15W-40 - for temperatures from minus 15 to + 40 degrees and above
Third generation, lineup 2007-2012
- The priority is the original Honda Motor Oil
- Requirements according to the ACEA standard - A1 / B1 / A3 / B3, or A5 / B5
- Viscosity characteristics:
- 0W-20, 0W-30, 5W-30 - for temperatures from minus 30 to 40 degrees and more
- 5W-30 - for temperatures from minus 20 to +40 degrees and more
- API Standard - SL
Fourth generation, model range from 2015
- Priority - only branded Honda engine mixture
- ACEA standards are available - A1 / B1, A3 / B3, A5 / B5; SAE 0W-20, 0W-30, 5W-30
When choosing engine oil, you should focus only on key parameters, such as SAE and API. So, consider the option with the choice of oil using the example of a 1995 Honda CR-V, with a 2-liter engine. Suitable for this car synthetic oil on a universal basis, with parameters 10W-30 SH. For more modern machines equipped with 2.0 and 2.4 liter engines, it is advisable to select synthetics or semi-synthetics 0W-30 / SL.
Finally, we highlight several motor oils that are most popular with Honda CR-V owners of different years of manufacture:
- Honda 5W30
- Shell Helix 5W-30
- ProFix 5W-30 SN GF-5
- Liqui Moly 5W-40
- Idemitsu Zepro.
Each car manufacturer in the manual for the vehicle prescribes the characteristics of a lubricant that is suitable in terms of parameters for a particular type of engine. In our article, we will talk about the recommended engine oil for the Honda CR-V.
Scheme 1. Selection of viscosity depending on the temperature range overboard the car.
According to the scheme, the following lubricants should be used:
- 0W-20;0W-30; 0W-40; 5W-20; 5W-30; 5W-40, in the temperature range from -30 0 C (or less) to + 40 0 C (or more);
Honda CR-V III 2007 - 2012 release
Based on the Honda CRV operating instructions, it is recommended to use lubricants that meet the following specifications for this car model.
Cars equipped with petrol engines.
- Cars delivered to Europe:
- according to the ACEA system - oil types A1 / B1, A3 / B3 or A5 / B5.
The use of such motor oils contributes to saving fuel mixture. To select a lubricant for Honda CRV, use scheme 1.
Scheme 2. Dependence of oil viscosity petrol cars(supplied to Europe) from the temperature indicators of the region in which it is operated vehicle. According to this scheme, it is necessary to pour:
- 0W-20, 0W-30; 5W-30 at temperatures ranging from -30 0 C (or less) to + 40 0 C (or more);
- 5W-30 under temperature conditions from -20 0 С to + 40 0 С (and higher).
The use of 0W-20 lubricant reduces fuel consumption.
- Machines not supplied to Europe.
According to the manual, to ensure the performance and durability of the motor, it is recommended to fill in the original motor Honda fluids Motor Oil having parameters:
- according to the API standard - oil classes SL or higher.
According to viscosity indicators, the oil is selected according to scheme 2.
Scheme 3. The dependence of the density of engine oil, for gasoline engines (not supplied to Europe) on the temperature outside the car. According to scheme 2, the following lubricants are used:
- 0W-30; 0W-40; 5W-30; 5W-40, if the air temperature is from -30 0 C (or less) to + 40 0 C (or more);
- 10W-30; 10W-40 at a temperature range of -20 0 С to + 40 0 С (and higher).
- 15W-40 at temperatures from -15 0 C to + 40 0 C (and above).
* - for machines equipped with an engine oil level sensor, the specified oil is not used.
0W-30 liquid filling contributes to savings combustible mixture.
Diesel vehicles
- original motor lubricants Honda Motor Oil;
The viscosity characteristics of the oil are selected according to scheme 3.
Scheme 4. Dependence of oil fluidity for diesel engines, on the temperature outside the car. The interpretation of scheme 3 is similar to scheme 2.
The use of engine fluid 0W-30 makes it possible to reduce fuel consumption.
2013 Honda CR-V IV
Petrol power units
According to the manual, it is necessary to use engine oils that have the following characteristics:
- Machines delivered to Europe
- on ACEA classifications- A3/B3, A5/B5;
- according to SAE 0W-20 classification.
Car oil 0W-20 makes it possible to achieve a reduction in fuel consumption.
- Vehicles not supplied to Europe:
- original Honda Motor Oil lubricants;
- according to API classification - SM or higher.
- the viscosity parameters of liquids are selected according to scheme 4.
Scheme 5. Viscosity of motor oils depending on temperature conditions. According to the scheme, you need to pour lubricants:
- 0W-30; 0W-40; 5W-30; 5W-40, at a temperature range from -30 0 C (or less) to + 40 0 C (or more);
- 10W-30; 10W-40 if the air temperature is from -20 0 С to + 40 0 С (and higher).
- 15W-40 under temperature conditions from -15 0 С to + 40 0 С (and higher).
5W-30 engine fluid reduces fuel consumption.
Diesel cars
According to the manual, motor lubricants are used:
- Cars delivered to Europe
- Honda branded fluids;
- according to ACEA requirements - C2 or C3.
- according to SAE 0W-30 (helps reduce fuel consumption), if the specified car oil is not available, fill in 5W-30.
- Vehicles not supplied to Europe
2015 Honda CR-V IV 2.0
Car engines running on gasoline.
Based on the instructions, you need to pour motor oils with the parameters:
- Honda branded lubricant;
- according to ACEA classification - A1/B1, A3/B3, A5/B5;
- according to SAE 0W-20, in the absence of the specified lubricant, it is allowed to pour 0W-30 or 5W-30.
Diesel vehicles
- branded car oil Honda Diesel Oil #1.0;
- according to the ACEA classification system - C2 or C3.
Honda CR-V IV 2.4 2015 release
Machines supplied to Russia, Ukraine, Kazakhstan, Belarus
The requirements for the car are as follows:
- according to ACEA standard - A1/B1, A3/B3, A5/B5;
- according to SAE 0W-20 standards, if such a liquid is not available, use 0W-30 or 5W-30.
Except machines supplied to Russia, Ukraine, Kazakhstan and Belarus
- Honda branded fluids;
- according to API classification - SM or higher.
- viscosity is selected according to scheme 5.
Scheme 6. Dependence of viscosity characteristics lubricating fluids from ambient temperature. According to the scheme, motor oils are used:
- 0W-20;0W-30; 0W-40; 5W-30; 5W-40, in the temperature range from -30 0 C (or less) to + 40 0 C (or more);
- 10W-30; 10W-40 at a temperature of -20 0 C to + 40 0 C (and above).
- 15W-40 at temperatures from -15 0 C to + 40 0 C (and above).
Conclusion
When buying a car oil, you need to pay attention not only to the basic base (synthetics, semi-synthetics, mineral water), but also take into account the viscosity parameters of the lubricant. Liquids for winter and summer have different fluidity, they are poured depending on the season. The former provide engine start without warming up, the latter protect the motor from overheating. The recommended engine oil for the Honda CR-V is indicated by the car's engineers in the manual. Its use will positively affect the motor and lubrication system.
In the instructions for the machine, the manufacturer insists on the use of branded motor oil, indicates that pouring various kinds of additives is unacceptable.