Where to process a car with liquid glass. The use of liquid glass for different types of surfaces

Modern technologies do not stand still, new means are constantly appearing, which could not have been dreamed of before. One of these innovations is the so-called liquid glass to cover the car, giving a beautiful shine. Many people think about how to apply liquid glass on a car correctly. A car that does not lose its original luster and does not get dirty is a motorist's dream. If you want your car to look great, you will need car polishing http://lrsauto.ru/polishing. This company employs true professionals in their field, and the price level is consistent with the quality of the work performed.

Liquid glass for cars pros and cons

Each new technology has both positive and negative sides. With a high-quality coating with liquid glass, the car shines like a mirror, which many owners like. Before you cover your car with this tool, you need to know all the nuances. Among the undeniable advantages of coverage:

aesthetic appearance.
Water and dirt seem to be reflected from the car.
The paint does not fade in the sun.
Protection from scratches - the result was noticed by many car owners.
Resistant to aggressive chemical environments.

It all looks just gorgeous, the car sparkles, the owner is happy. But there are also disadvantages:

It is necessary to strictly observe the application technology.
Do not wash your coated car too often, use only a non-abrasive shampoo.
The price in a car service is considerable, but even with self-application, you will have to pay several thousand.
After applying liquid glass, it is not recommended to wash the car for seven days, as the process of reaction of the composition with the paint of the car continues.

The composition of the polish

Before applying liquid glass to a car body, it would be good to figure out what is included in the car care product. These compositions are sometimes also called nanoceramics, because one of the components has the same chemical formula as ordinary sand. The main components of ceramics:

Titanium oxide - simply put, "titanium white", gives strength.
Surfactants - repel dirt from the coating.
Silicon dioxide - quartz, this component takes up to 30% of total mass. Gives hardness to the composition. It is because of this component that the composition is called liquid ceramics.
Decamethylcyclopentasiloxane is an acid-resistant component that protects the machine from harmful chemical influences, its content reaches half the mass.
Aluminum oxide - increases the strength of the coating.
Alkoxysilane - creates a protective film, its content in the composition is more than 10%.

The subtleties of applying the composition

Before you cover the car with liquid glass, you need to know all the key points.

The procedure for applying this coating includes several stages:

thorough washing and complete cleaning of the surface
degreasing with special formulations
polishing of headlights, glasses, bodywork, removal of all previous coatings to factory paint
chip masking
re-polishing
deposition of nanoceramics in several layers
drying for at least 4 hours

Therefore, before applying liquid glass, check that you have all the tools and reagents. If you do not follow at least one of the above rules, the coating will still fall, but the adhesion to the factory paint will be worse, and there may be nothing left of a beautiful mirror shine in a couple of months.

Is it worth it to cover the car with nanoceramics?

The rather high price of coverage stops many. Still, not everyone can pay twenty thousand rubles for beauty. If you do not know how to properly apply liquid glass to a car, it is better to entrust the time-consuming operation to professionals.

According to reviews, with proper coating, the machine can withstand up to a hundred washes. Manufacturers of polishes guarantee the preservation of the original appearance for three years, but in Russian conditions, processing must be done annually.

A significant advantage is that the car needs to be washed much less frequently. But it is advisable to wash with gentle shampoos. Also one of the decisive moments is the region of residence of the car owner. In areas where rain and snowfall are rare, such coverage may not be necessary.

To find out how liquid glass is applied to a car, it is better to consult with those who have experience in using such products. Most agree that Japanese coating compounds are best. They are not cheap, but the impeccable quality and mirror shine are worth it.

One of the features of this type of polishing is that the composition chemically reacts and adheres to the car's native paint. A big plus of processing is that the car after it looks like new.

If the budget allows - of course, it is better to make such a cover.

Which is better - liquid ceramic or vinyl film

The undoubted minus of the vinyl film is its unaesthetic appearance after a certain period. She wears out, and it shows. On the other hand, the film protects well from chips. Removing such a coating is difficult.

Liquid glass is erased gradually, which is almost imperceptible. The car just doesn't shine. Do not save and buy cheap polish. According to numerous reviews, the Japanese composition is the most persistent, but it is also quite expensive.

Another point - when self-applying liquid glass, you should not try to smear the entire product at once with a thick layer. The result looks deplorable.

Self-application using the example of WILSON BODY GUARD GLASS

Before the process, it is useful to watch a video of how professionals apply liquid glass

The first step is to thoroughly wash the car, remove the accumulated plaque. Degrease special fluid or clay. Then the two components of the polish are mixed, applied in parts, left to dry for 15-20 minutes. The optimum temperature in the room where the process takes place is from 15 to 30 degrees.

Then the parts - the body, fenders, hood - are polished with a cloth that is attached to the kit. Next, you need to wait another ten to fifteen minutes and polish again with a cloth. After all the manipulations, the machine should dry for four hours. Mirror shine and resistance to drops and dirt will transform the car.

Liquid glass is widely used in construction. This is understandable, since it is moisture resistant, wind resistant, has excellent adhesion (adhesion to most surfaces) and chemical inertness, can serve as an antiseptic, is characterized by fire resistance, abrasion resistance, non-toxic, has low thermal conductivity, and is resistant to corrosion.

Liquid glass is rarely used in its pure form, most often it is used as an important component many building materials.

Technology for obtaining liquid glass: a fired mixture of quartz sand and soda is crushed and mixed with water.

Types of liquid glass

By type source materials liquid glass is:

sodium;
potassium;
sodium - potassium;
potassium - sodium;
lithium.

Potassium glass is indispensable in the production of enamel, and it is also an excellent binding component. In construction work, the sodium variety of liquid glass is most widely used.

Ways to use liquid glass

Due to its water-repellent properties, liquid glass can be used as a waterproofing material.

The use of liquid glass for waterproofing foundations

To create a reliable waterproof barrier, two layers of liquid glass must be applied to the foundation.

Each layer must dry completely. Such waterproofing is called coating, it requires the subsequent use of rolled waterproofing materials.

A mixture of cement mortar and sodium liquid glass can qualitatively repair the cracks formed in the foundation.

It can also be used in brick or concrete block masonry. For such a mixture, for 1 kg of cement, you need to take 50 g of liquid glass and 750 g of water.

Another method of waterproofing is to mix liquid glass with a concrete mixture, which is used to make a monolithic foundation.

The order of work is as follows: at the beginning, formwork must be prepared and reinforcement laid. Next, you need to prepare a mixture of sand and cement, then add liquid glass and gravel dissolved in water to it and immediately begin to pour the foundation.

The use of liquid glass for waterproofing pools and wells

With the help of liquid glass, it is possible to carry out internal and external waterproofing works in the pool.

For internal waterproofing, it is first necessary to treat all joints and recesses with glass, then it is necessary to cover the floor and walls with it in 2 - 3 layers. For external waterproofing, liquid glass is added to the concrete mixture.

Waterproofing of wells is carried out using a mixture of cement-sand mortar with liquid glass, which first covers the surfaces of seams and joints, and then the whole thing.

You can first apply a layer of liquid glass to the entire surface of the well.

Protecting basements from moisture with liquid glass

If moisture gets into the basement from leaky seams, proceed as follows:

We start by cleaning the seams, removing dust and various debris from them;

We mix Portland cement with liquid glass (in a ratio of 20 to 1), add the required amount of water - the repair mixture is ready;

With the resulting mixture, we fill each seam and each large crack;

With a brush, apply water to the coated surfaces;

A day later, we apply a layer of liquid glass.

Wet concrete walls are treated similarly.

Liquid glass for fire protection

Liquid glass has refractory properties, so it is often used in cases where stoves, fireplaces, chimneys are made, heat-resistant concrete, refractory enamels and paints are produced.

Metal elements and structures of structures are processed with liquid glass. It is able to protect wooden parts from fire.

To prepare a refractory mortar, we make a mixture of cement, sand and liquid glass in a ratio of 1 to 3 to 1. We use it immediately after preparation.

Antiseptic properties of liquid glass

Processing wooden objects and structures with liquid glass will not allow fungus and mold to appear on them. Concrete and plastered walls of the premises can also be treated with it for the purpose of disinfection.

At least two layers of liquid glass must be applied to the surface. Each layer must dry completely. Such processing will complicate the subsequent painting of the walls and the application of plaster on them.

Therefore, decide for yourself how much you need it.

Other areas of use

Liquid glass can be used

when creating self-leveling floors;
as a reliable adhesive for wood, fabric, porcelain, glass, cardboard;
as a covering of floors and walls of bathrooms;
to protect the facades of buildings from the weathering of materials.

Rules for working with liquid glass. Features of its storage

When working with liquid glass, you should:

protect open areas of the skin and mucous membranes of the eyes from contact with it;
use protective equipment and overalls while preparing the mixture and solution;
tightly seal containers containing liquid glass. It is important to keep them out of the reach of babies and pets.

Liquid glass can be stored for one year, is not afraid of freezing. Some sediment is allowed.

The experience of using liquid glass shows that it is affordable, practical and can be used in a variety of areas.

In everyday communication, "liquid glass" refers to a fairly wide range of tools used as building materials, adhesives and chemicals. If we talk about liquid glass for cars, then in this case we mean special solutions for polishing and protecting the body.
The composition of the latter is quite diverse (silicon dioxide, fluorine, titanium oxide, ceramic quartz, etc.), which makes it possible to obtain various practical properties.
Car polishing with liquid glass is used not only for the body, but also for glass and rims. The essence of this method lies in applying a liquid agent to the treated surface, which solidifies after a certain period of time. As a result, a protective covering, forming with the main varnish and paint, as it were, a single layer.

Liquid glass coating repels water

Every day, the surface of the car body is exposed to mechanical, chemical and thermal stress. Over time, this not only makes the appearance of the car worse, but also destroys the layers of varnish and paint, and then the metal. If there is no protective coating on the car (liquid glass, traditional polishing, ceramics, wax), moisture and dirt will gradually penetrate deeper, causing corrosion (rust). The latter violates the strength of the body, reducing the protection of the main technical components of the car.

Attention! This method is not an alternative to varnish, but only creates additional protection.

To mechanical damage to the body include scratches that appear from impacts of small stones, hail, fragments of tree branches, claws of animals and birds that have chosen your car as a place of rest, and as a result of other domestic and emergency situations.
Chemical exposure- these are, first of all, salts and acids contained in precipitation (rain, snow), which also destroy the main coating. In addition, in winter, to de-ice the road, utilities often use harsh chemicals that get on the body of your car and gradually destroy it.
thermal effect- these are well-known temperature differences from heating by the sun on a summer afternoon to severe frosts on winter nights, which cause the formation of microcracks in the paint layer.
Covering a car with liquid glass allows you to achieve several goals at once in solving this problem:

Restoration of already existing damage. The liquid actively penetrates into scratches and cracks, filling and smoothing them.
The formation of a protective layer that prevents the appearance of new damage.

It is also worth noting that the main practical properties of a layer of liquid glass or ceramics for cars are hydrophobicity and antistatic. In other words, this remedy repels water and dust particles. In practice, it looks like this: the liquid that falls on the surface treated with such a tool is collected in drops that actively flow down the glossy surface, simultaneously washing away all the dust present on it.

How to apply liquid glass on a car

Car coating with liquid glass

In most cases, you can apply liquid glass for cars with your own hands. The only difficulty of the technology lies in the correct preliminary preparation of surfaces.
Choose a place to work with normal temperature, so that the possibility of dust, sunlight and, moreover, precipitation on the body is minimal. Pre-wash and dry the car thoroughly, and if necessary, treat with a universal degreaser. This is very important to do - liquid glass on a car should be in perfect contact with the main surface.
You need to work alternately with separate sections, with an area of \u200b\u200babout 0.5 square meters. It is most convenient to start from the roof. The liquid must be applied to the sponge included in the kit. Then, with gentle movements, treat the surface area with a sponge. Depending on the brand chosen, after applying the product, it is necessary to wait a certain period of time (indicated in the instructions), and then perform a little polishing with a rag, also included in the kit.

After processing the entire car, it is necessary to exclude touching the body for several hours.

On the first day, the car should not be washed at all, but it is better to leave it in the garage altogether.
Complete hardening of the layer occurs within 15-20 days, and during this period it is better not to wash the car at the sink, but only rinse it with clean water.

Manufacturers and cost

Liquid glass for cars is produced by many manufacturers

Of course, such a promising market as liquid glass for car bodies is attractive to a large number of manufacturers. Among them are representatives of different countries and price categories: V-MAFA(China), KillAqua(Russia), GYEON and CQuartz (South Korea), Nanoskin(USA) and Willson(Japan). Also, when listing brands of polishes and liquid glass for cars, you should definitely remember Everglass– ceramic coating of a professional level, unfortunately, available for application only in car centers.
Choosing liquid glass for a car, which is better is a moot point. Here it is necessary to take into account the ratio of cost, duration of action, resistance to detergents, ease of application, layer strength and water-repellent properties. So, each brand has its own characteristics. For example liquid glass for cars willson glass guard, which is based on silicon dioxide, when applied to the body allows you to provide protection for a period of at least a year, with average price from 60 dollars. By the way, this line has separate products for dark and light cars, which allows you to restore the brightness of the original body color as much as possible.

Liquid glass is produced by many manufacturers of protective chemicals for cars. You can always find something suitable

Korean stamp CQuartz also uses silica and lasts up to fifty washes. Price category from $ 50, but the main advantage of this tool is the adaptation of the tool for our climatic conditions. Related brand GYEON lasts up to 80 washes. At the same time, evaluating the antistatic properties of this liquid glass for cars, the reviews of the owners indicate that the intervals between washes are significantly increasing.
In turn, the domestic series KillAqua offers protection from six months to three years, with an average cost of $80. But in relation to this brand there are very controversial reviews. So, for some, the price for real quality is too high, while others do not notice a positive effect at all.

Advantages and disadvantages

Car covered with liquid glass

Summing up regarding the processing of cars with liquid glass, there are several main points that will give you an idea of the feasibility of such a procedure.
Disadvantages:

When choosing liquid glass for a car, the disadvantages that you may encounter are, first of all, the price. It is significantly higher than that of simple polishing and waxing.
The use of hard brushes for washing and scrapers for cleaning snow destroys the coating of a car with liquid glass, and reviews from motorists in this matter indicate some inconvenience.
After processing, it is necessary to wait for a long period of complete solidification, during which careful operation of the car is necessary.

Today, liquid glass is widely used in various construction and repair work Oh. According to its chemical composition, it is divided into:

, which is also used in the production of antiseptic fire-resistant impregnations, strengthening the foundation. It is characterized by high stickiness and can interact with minerals;
Potassium liquid glass is highly resistant to atmospheric and acid influences, and is mainly used in the manufacture of paints.

Using liquid glass for waterproofing, you can not only reduce the absorption of moisture, but increase the resistance of the material to abrasion, protect it from chemical attack. Surface treatment with liquid glass has several types of penetration:

before proceeding with the application of the waterproofing layer, the working surface is leveled and degreased. To process the plaster layer or concrete, a brush or spray gun is used. Liquid glass for waterproofing penetrates 1-2 mm deep into the material;
to ensure deep impregnation, the waterproofing composition is applied in several layers. In this case, the waterproofing of the plates can reach 20 mm in depth.

In the process of work, special attention should be paid to joints and seams. To protect ceilings, floors, basements, cellars, pools, ponds from moisture, a solution with a ratio of 1 part of liquid glass to 10 parts of concrete solution is used.

Antiseptic and adhesive properties make this insulating material the best sealant. Such glass is used for waterproofing basements and attics. This makes it possible to provide reliable protection from dampness, fungus, mold, to achieve a high level of fire resistance. Impregnation with such a composition helps to restore weathered areas of plaster and concrete, provides antiseptic protection. In addition, the solution is used in the anti-corrosion treatment of metals.

Waterproofing of foundation slabs - main types:

coating. It is applied to the surface, followed by another layer of insulation (for example, rolled). It is recommended to apply two layers of silicate solution, because part of it is absorbed into the concrete, reliably filling the micropores;
use of cement mortar on liquid glass e. This method is used in the elimination of large leaks, it is also used in the waterproofing of wooden houses with prefabricated foundations;
use of silicate solution as part of the concrete mortar. The concrete mixture, which contains silicates, dries very quickly. A prerequisite for the use of such concrete mixtures is the strict observance of proportions. Otherwise, the strength of the foundation may suffer.

Using liquid glass for waterproofing, the following advantages can be distinguished:

formation of an effective waterproof barrier,
reliable adhesion to mineral substrates,
ease of use,
low cost solution
little material consumption.

Possessing a crystalline structure, this material is able to provide reliable protection against moisture, protect building material from destruction, and reinforcement from corrosion.

However weak spots liquid glass still has it. These include;

fast crystallization. Therefore, it is better to entrust the work on waterproofing the foundation to a professional;
the need to additionally use materials to protect the waterproofing layer.

Waterproofing baths, underground structures, garages, buildings for any purpose, carried out using liquid glass, is one of the most effective ways to protect against the harmful effects of moisture. In addition, glass is in contact with water, which significantly expands the scope of its application.

Video - Cement screed after treatment with liquid glass

User Questions:

Hello, please tell me, I have a garage on the basement floor, the coating is just a screed. So in one place the floor and part of the wall from the bottom get a little damp, as if there is no water and it gets damp quite a bit, I think to put a tile and add liquid to the tile adhesive
Good afternoon. pool waterproofing question Clay surface. The possibility of applying liquid glass to the surface or a mixture of clay with liquid glass as the last layer of the wall (or further on this mixture of liquid glass). The pool is about 10 cubes, n
Is it possible to use liquid sodium glass for decorative processing of plasters, putties and in what proportions (to protect against moisture, from fading in the sun). As an alternative to acrylic varnishes imitating wet stone.

Liquid glass is used to protect the surface, that is, it is a finishing material. The use of liquid glass also affects the construction industry. Silicate glue, as it is also called, has positive characteristics that are unique to this type of building material.

What exactly is liquid glass used for and what characteristics does it have? First of all, it should be noted that the material is an aqueous solution of silicate salts. Versatile areas of action allow it to be used for different degrees of processing.

We list several positive characteristics of liquid glass:

It is used in many areas of construction and finishing works. You can process any surface with any characteristics.
Hydrophobic advantage that allows you to protect the surface from the effects of moisture and water. It is the primer made of liquid glass that prevents the material from being impregnated with water.
The minimum hardening time, regardless of the conditions and methods of application.
Antiseptic effect. As a result of application, coating with liquid glass protects the surface from the appearance of fungus and mold.
Hardening takes place in a short time. If you apply evenly and do it in several thin layers, the effect will be amazing.
Liquid glass for floors and walls is used in many cases as a means that forms a refractory layer.
It is used to protect surfaces from external influences, in particular, from the action chemicals and substances with which surfaces can be treated.
Sodium liquid glass is an environmentally friendly building material that does not affect the human body.

The properties of liquid glass have such a wide positive scale that the material is used in any field of construction work. At the same time, the price does not exceed the permissible norms.

Related article: Features and Applications of Orthophosphoric Acid

Complete waterproofing

The use of liquid glass for waterproofing porous materials has some peculiarities. However, the way the work is done is simple and does not require special skills and abilities. For waterproofing, wood is treated with liquid glass, concrete, plaster and brick are impregnated.

How to use liquid glass to waterproof the surface:

Initially, you need to prepare a solution with which the surface will be primed. Silicate, water and cement are mixed in equal proportions.
Impregnation of concrete begins only after the base of the surface is completely cleared of old building material.
Treating wood with silicate is a little more difficult. The surface of wooden decor items must be cleaned to a natural base in order for high-quality adhesion of materials to occur.
Do not apply a hydrophobic coating on a wet surface - in the future, complete or partial delamination will occur.
The layer of silicate solution should not exceed 3 mm. At the same time, the drying time will be minimal, and the adhesion is better to hold on to.

Often the material is used as a screed. This is especially true for concrete flooring. The treatment of walls with liquid glass is carried out according to the principle of puttying or painting. Walls and floors require special care if there is no auxiliary coating, and with liquid glass, these problems completely disappear.

How is a floor screed made?

Many people often have a problem with exactly how the floor is treated with liquid glass, if we are talking about a screed. The way of doing work for wood and concrete is different in concept up to a certain stage. So, for example, specific processing methods are used to process a wood floor: first, a concrete pour is made and it is expected to be completely hardened, only then a hydrophobic screed based on liquid glass is performed.

If the screed is planned on concrete, then the pouring technology is as follows:

The screed is applied to the concrete floor immediately after cleaning and surface treatment.
The solution is laid out in equal portions, while leveling is carried out by distributing the mass with a wide metal spatula.
It is necessary to allow the mixture to dry, then make the final leveling of the surface.
The last stage - the floors are covered with a special varnish.

Related article: Features of using a covering film

In the case of covering the concrete floor with liquid glass, there are no possibilities for further finishing. Even the minimal decoration will not work. The processed basis cannot be painted, covered with linoleum. Such a floor for residential premises does not look aesthetically pleasing, therefore the screed is performed in industrial premises.

On video: fast way application of liquid glass.

Other applications

What is a silicate coating for floors and walls, we have already found out. Depending on the characteristics of the application of the material, the time is determined, how long the layer dries. But there are also areas of non-standard use of liquid glass:

Painting with silicate glue is carried out for the treatment of walls and floors for the purpose of antibacterial action.
Using silicate glue, you can lay tiles, tiles and mosaics in the bathroom, kitchen, pool, bath, shower.
The method of sealing cracks and joints during construction work is another area of \u200b\u200bapplication of the material.
Sodium glue can be used both for woodworking and in the manufacture of furniture, for example, instead of nails and a construction stapler.
In horticulture, a liquid glass solution is used as an antibacterial agent. The treated place for cutting branches or broken bark is carefully covered with a substance.
Housewives often use a liquid based on silicate glue to clean the most contaminated surfaces. This is the main and almost the only way to clean pots and pans from soot.
Made mixtures of liquid glass are actively used in the process of cleaning walls from old finishing materials. Remarkably rubbed off old paint, plaster, putty.
Furniture breakdowns and malfunctions are easily, and most importantly, imperceptibly eliminated thanks to liquid glass putties.
There is practically no additional decorative finishing on the glass base, since the surface repels the impact of any foreign agent.

The characteristics of silicate glue and its application are so simple in the context of construction and repair work that they do not require special skills and abilities possessed by the master. It is enough to read the instructions on the package or watch the training video.

Related article: How to choose impregnation for concrete?

The scope and method of using sodium-based glue, that is, liquid glass, are diverse. In addition to industrial use, there were measures of use in the home. Finishing already decorated surfaces at this stage of processing is quite appropriate. Many building professionals recommend the use of silicate mortar in almost all stages of finishing and processing.