No one dares to argue that the practical model Lada Granta sedan in the short period of its existence has acquired enviable popularity among the large army of domestic motorists. It cannot be argued that the car has reached the peak of perfection, although it is quite possible to eliminate the insignificant shortcomings present in it with your own hands. To do this, you will need to perform do-it-yourself tuning, which is popular today, which allows you not only to give Grant an individual charm, but also to adapt it to the needs of a particular owner.
How to improve the motor and accelerator assembly?
This is where chip tuning comes into play. The basic setting involves the implementation by the electronic control module of the average and optimal parameters of the engine functioning, which are loyal to the process of running the car. The modernization procedure involves the removal of the microcircuit from the computer and its reconfiguration. This event should be performed independently only if you have certain knowledge and experience in the field of programming. For the average owner of a Lada Grant sedan, such a specific procedure as chip tuning is not available, so its implementation should be entrusted to experienced programmers from specialized studios. If you correctly perform the firmware, then it is quite realistic to achieve a power increase in the range of 15-20%. There can also be an adjustment of the level of fuel consumption. This parameter depends on the software version.
Another significant point that can provoke increased attention from the owner is the accelerator pedal. The nominal setting of the unit is characterized by a “sluggish” response of the Lada Granta sedan engine to pressing the corresponding pedal. To achieve a sharp increase in speed, a deeper pedal sinking is required, but here again there will be a delay. This annoying feature can be minimized by tightening cable drive damper and adjustment actions with camshaft.
Suspension tuning secrets
The chassis of the Lada Grant sedan without much difficulty can be subjected to such things as do-it-yourself tuning. Initially, the design of the suspension assumes ride quality, aimed at achieving softness and comfort. This aspect will show its best side on the roadway. good quality. But in reality, the situation is different, and therefore the suspension of the Lada Granta sedan needs to be transformed.
The actions are not intricate, but consist in cutting one turn on each of the springs. The resulting rigidity is able to provide the car with previously missing stability. You can also replace the front suspension struts with those elements from Kalina. Due to the shorter length of the borrowed struts, they will provide a low fit for the improved LADA Granta sedan.
Tuning of exterior elements
You can upgrade the appearance of the LADA Granta sedan at will, since the manufacturer has endowed his offspring with a rather spectacular exterior, as evidenced by the photo. The paradox is that do-it-yourself body tuning is the most popular trend among owners predisposed to such art. Some hobbyists achieve complete unrecognizability of the appearance of their car by performing transformation operations. Bumpers are especially prejudiced, because the owners consider its exterior outdated. The design "Robot" is used more often than analogues due to the ease of fastening and modern appearance. The most progressive option can be considered a variation of the STM bumper. Comfort is guaranteed here. The design of the air intake involves the generation of an additional flow, which contributes to more efficient cooling of the motor and brake units, and it looks good in the photo. Landing sockets for head optics are equipped with an original design.
The rear bumper is less often subjected to such a thing as tuning compared to its front "colleague". Most owners are limited only to installing a spoiler. Some amateurs do not find use in this "accessory", but this is not true. spoiler endowed important function, as soon as the speed of the car approaches the maximum value. It allows you to concentrate and direct the oncoming air flow in the direction of the roadway, creating the downforce known to everyone. The production of the component is carried out by specialized studios. By purchasing a product, the owner is left only with the “obligation” to install it.
The standard grille in front of the radiator is not capable of boasting an effective protective ability. The situation is especially aggravated in the summer, when frantic flocks of insects torpedo defenseless radiator cells with furious fury. Avoiding this sad fate is very simple. It is enough to mount the grid between the ribs of the lattice. You can fix it with glue or clamps, which is more effective.
If we touch on interior tuning, then only the most demanding owners who want to stand out from total mass Grant holders. Initially, the manufacturer provided for his offspring a variety of trim levels, which implies the possibility of choosing a front panel, equipment options and upholstery. salon elements. But some subjects still rage over the regular interior and tend not only to replace the "native" upholstery, but also to install new seats.
Thanks to the impressive experience in the field of such a thing as tuning, which successful owners kindly share on the Internet (photos and videos), it is possible to identify transformation options that allow you to achieve spectacularity in the appearance of the interior and exterior with a fairly “sane” budget.
As an alternative measure, tuning can be used to upgrade LADA Granta sedan parts from other cars. The installation of such products has enough opportunities to transform your “swallow”, endowing it with originality. Fortunately, there are a lot of offers of analogue products on the market, which allows creative owners to do their own tuning Grants with incredible agility, achieving enviable results.
Lada "Granta" liftback- the machine is new, produced in a wide range technical equipment. An improved transmission, a modified suspension, a model line of standard engines and gearboxes so far satisfy the user. That's why tuningLadaGrantaliftback mainly concerns the appearance of the car.
Nevertheless, adherents of the technical improvement of cars have something to put their hand in and in Lada "Granta" liftback.
Initial engine tuning
Having bought a brand new car, it is hardly worth immediately taking on the alteration of the motor. Let your Grant run in, adapt to the loads, work in rubbing pairs. Perhaps, after running in, you will find the dynamic characteristics of the machine ideal! Or maybe factory defects that fall under the guarantee will manifest themselves ... However, something needs to be done in any case.
Air filter zero resistance facilitates the "breathing" of the car. The increase in oxygen in the combustion chambers with such a filter is 3-6% - depending on the engine speed. The power output also increases proportionally.
A few more percent of the power of your "Grant" gives a tuning kit for the exhaust tract. An exhaust manifold with pipes of increased cross-section formula 4-2-1 facilitates ventilation of the cylinders, reduces the resistance to the movement of exhaust gases.
A pair of smartly gleaming mufflers with bells exhaust pipes, scorched by engine flames, complete the job. With them, your car will become both more beautiful and faster!
To pay attention chip tuning LadaGrantaliftback! Flashing the car computer makes it possible to optimize the interaction between the driver and the car. After flashing, the car will meet your expectations and your driving style as accurately as possible. At the same time, fuel consumption will be slightly reduced, and power will increase markedly.
The electronic gas pedal is a useful thing, but not all Lad models are installed by the factory. Mounted in front chip tuning on Lada "Granta" liftback, the electronic pedal will give the control unit the ability to accurately respond to driver commands. With the help of an electronic pedal, the driver can dose the force developed by the engine with jeweler precision. Which again has a beneficial effect on fuel consumption!
Advanced models of electronic pedals include a control unit with mode switching. By equipping the Grant with a similar device (see the article on the page), you can change the operating mode of the car's control complex according to your needs.
Deep engine tuning Lada "Granta" liftback may include the installation of a forged piston group, cylinder boring, “feeding” the motor with a turbine and a nitrogen accelerator. It is better to carry out such procedures in combination, since turbocharging a serial engine dramatically increases the risk of piston destruction under extreme loads. Installation of expensive forged parts of the piston group without increasing the performance of the fuel supply system is also of little value.
It should be noted that increasing the power of the motor entails the need to strengthen brake system, transmission and suspension modifications. Otherwise, enjoy the championship agility Frets "Granta" liftback it won't take long...
External tuning Lada "Granta" liftback
Exterior tuning Lada "Granta" liftback you can start with the fenders, replacing the standard metal body parts with more expressive ones made of durable ABS plastic.
By installing polymer wings, you will not only improve appearance auto, but also free yourself from the worries of fighting corrosion. Plastic is known to not rust and tolerate low-intensity shock loads well. The chopped air intake line of the tuned wing will add to the car LadaGrantaliftback athletic agility and healthy aggressiveness.
While the future owners of the updated Lada Granta meticulously study the exterior of the car, arguing about the features of serial configurations, fans of automotive originality do not sit idly by. “Faces of a non-general expression” - this is what every car needs, including a pretty one from birth Lada "Granta" liftback!
Variety of molding options for the front bumper and grille made in-house by craftsmen tuning LadaGrantaliftback, surpass the laconic factory design today!
Especially popular among adherents of a dynamic driving style is the front bumper, made in the style of "I'm a robot." Having received a new body kit, the front of the car becomes expressive (and even a little flashy), expressive and aerodynamic.
Thanks to the large air intake located in the central part of the bumper, the motor and brake system of the front wheels receive additional cooling, so necessary with an active drive.
The options for finalizing the front body kit, made by auto design professionals, look even more worthy, and give the middle-class car a discreet solidity. "Narrowed eyes" give the impression of philosophical sophistication and unshakable calmness. But it is precisely these qualities that are so lacking for road users in any corner of our country!
In the white version of the body color, the car with the same shape of the radiator grille looks somewhat sleepy, but large structural elements improve the perception of the design. Nothing obscured "look" gives the car a look of interest and openness. A positive attitude is in every feature of the appearance of the white Grants Liftback!
Useful little things shape the look
Overall appearance Lada "Granta" liftback worked out by the designers quite carefully. The silhouette of the model compares favorably with the sedan that preceded it. That's why tuning LadaGrantaliftback do it yourself often affects small, but important elements of the appearance of the car.
On the rear edge of the trunk lid "like a native" there is a small lip-spoiler. By slightly increasing the size of the body, the tuning part significantly improves the aerodynamics of the aft part of the car and really helps to maintain cleanliness rear window. Note that such an addition is perfectly combined with both the rest of the body elements and the design of the model as a whole.
Visually pleasing and undoubtedly practical tuning addition LadaGrantand Liftback - stylish roof rails, specially designed for new body. You don't need to drill the roof to install Grant railings! Tuning parts are offered in two colors: silver and black, and are designed for installation in regular trunk mounting points.
Having purchased and independently installed strong aerodynamic crossbars, you can easily transport any long load weighing up to 50 kg on the roof.
We play big! Let's sing out loud!
A music lover, buying a car, acquires a mobile concert hall. More precisely, it makes a concert hall Lada "Grant" Liftback tuning- but the masters have a place to turn around! The car is spacious, there is enough space for equipment. Turning rear doors into speakers is both costly and difficult, but when done responsibly, the result is impressive.
Expanding the track of a production car is not so easy: serious work is required on the suspension and drive. Overhead elements of the wheel arches turn an ordinary car into a racing car. The "multiplied" and modified exhaust pipes look like spaceship nozzles. Stylish bumper ties together all the elements of engineering and art design of the car. This is what complex tuning means: the car both sounds and rushes no worse than a rocket!
And although the black-and-red tongues of hand-drawn flames are more reminiscent of a camouflage pattern, the outline of the front of the car has become a clenched fist, rapidly piercing into space.
Sports seats, ergonomic steering wheel, multi-point seat belts - a great boon! However, the milky-white molded surfaces on the front panel of the cabin are a distracting (if not annoying) bust.
But let's not be too strict with amateur craftsmen tuning: LadaGrantaliftback- the car is new, there are still few examples of successful alterations in all respects. But it's worth listening to the experience of decisive grant owners!
All as one, they talk about the need to modernize the soundproofing of a production car. Volumetric body resonates on the bumps in the road. Such sensations, the testers describe, are like sitting inside an iron drum.
Let's take care of the important
In the factory equipment of any Grant there is a steel engine protection. It's better than nothing - but as soon as you get a more reliable shield, don't miss your chance! Decent ground clearance (20 cm for the model with mechanical box gears, 16 cm for cars with automatic transmission) - not a guarantee against hitting stones and other obstacles on the road. According to reviews, the tuning protection of the engine and gearbox from Kalina is perfect.
Lockers (or wheel arch liners, to put it in Russian) are an important part of a high-speed car. The polymer material takes on all the impacts of pebbles, splashes of dirt - and as a result protects body parts from abrasive wear and corrosion.
There are fears that the fender liner violates the ventilation of the body space so much that the rusting of the metal accelerates significantly. Such fears are unfounded. High-quality lockers, installed without amateur drilling of the body, bring benefits - and considerable ones.
Agree that the wheels of the standard set "Standard" 175/70 R13 sometimes look slender, and quite an elegant body is made heavy.
There is a lot of value - especially in terms of making it easier to roll over bumps in the road - there is a installation of fifteen-inch wheels,
Or even sixteen-seventeen-inch rims with low-profile tires. True, a decision of this kind is justified only if there are good roads with high-quality coverage everywhere.
Exterior mirrors with electric adjustment, heating and two-way repeaters of turns - the imperative of the times. There are never too many lights! Installing such mirrors with your own hands is not difficult. The activation of the heating is synchronized with the rear window defroster.
When buying, make sure that the rear-facing LEDs do not blind the driver - otherwise, by turning on the left turn signal, you will be forced to shield yourself from the too bright light of the colored LEDs.
Think about beautiful
Your Lada "Granta" Liftback black as night, and her body shines like a resin mirror? Install headlights with a black background between the reflectors, and seriousness will be added to the appearance of the car.
Once in Germany it was considered chic to cover the roof of a car (no matter what) with black leather, thus imitating a convertible. In the new century - new gadgets! Agree that the black glossy film on the roof of the white "Grants" is cool!
Adds steepness the same black film on the glass.
Not everywhere is appropriate black film. No matter how effective LadaGrantaliftback, sealing the headlights with black is nonsense! One day there will not be enough light to notice an obstacle and respond to it in time. The result is an accident!
Some people find it beautiful and the reduction in clearance to the limiting millimeters. agree with this method tuning Lada "Granta" Liftback hard.
|
|
The "lad" recall message received mixed reactions. Some shook their heads meaningfully, saying that this was to be expected, while others, on the contrary, regarded the news as a change for the better. After all, the Volga Automobile Plant is conducting such a global and noisy troubleshooting campaign for the first time.
Our opinion did not coincide with either one or the other. First of all, let's reassure the owners: it's okay, you don't need to grab your head and rush headlong to the dealer. Even in the recommendations of the plant, sent to all technical centers for finalizing these models, the words “possibly” and “if necessary” repeatedly appear. As confirmation: on the machine on which these flaws were eliminated, nothing discouraging. Therefore, we are ready to state with confidence that the action is more of an advertising nature. It is more likely to draw attention to products than to eliminate serious design flaws.
Dealers are already sending all owners of cars that are on the recall list (by identification number - VIN), written invitations for unscheduled free maintenance. To conduct it or not is up to the car owner to decide. If you are undecided, we offer you together with specialists dealer center"Tekhinkom-Auto" to go through all the operations and look at specific examples, how appropriate it is. We will supplement the factory instructions with our comments. An important note: the recall campaign has been launched primarily for Grants, only an operation to protect the fuel pipes is being carried out for both models.
IF WE WERE A REVIEW CAMPAIGN
Also in the February issue (p. 112–114) , when we were first able to examine the "Grant", as they say, under a magnifying glass, we talked about much more significant shortcomings. For example, at the entrance to engine compartment the plastic casing dangles - protection of the tubes of the fuel line and the adsorber. Rubbing against adjacent parts, the lower radiator hose clearly lacks fasteners. Mediocre clamps on the engine ventilation pipes do not provide tight connections: after a year of operation, the engine will be covered with oil deposits. And this is only part of the shortcomings. We will definitely tell you about the rest in the near future - expect regular reports about the editorial "Grant".
Returning to the recall campaign: it is a pity that forces and means were used ineffectively. It is possible that the elimination of the shortcomings indicated by us would cost the manufacturer more, but in the future it will pay off faster. After all, AvtoVAZ lacks serious investments in reliability to build a solid car.
IN PICTURES
Eliminate possible contact of the tubes of the power supply system with the clutch cable.
How to fix.
The fuel and steam pipes must have corrugated liners (factory part number 2190-1104286).
Note.
It is better to fix the electrical corrugations with plastic clamps. However, the corrugations, upon contact with the cable, will also quickly rub off. To ensure that this flaw is eliminated, additional mounting brackets for the fuel line must be installed. This is more expensive, so the manufacturer limited himself to a budget option.
Modify the body in the place where the washer reservoir is installed.
How to fix.
Stick tapes in the indicated places so that the tank does not rub against the metal.
Note.
The alteration is useful: after several years of operation on many cars, it is necessary to change the reservoir wiped from vibrations. We have one more important remark: it would be necessary to glue the tide on the tank, which also serves to attach to the body. Any soft (preferably self-adhesive) material a couple of millimeters thick is suitable for gaskets.
Check the position of the harness at the brake fluid level sensor.
How to fix.
Slightly unscrew the tank cap and turn the sensor so that it does not touch either the battery or the motor shield.
Note.
Check harness location after changing fluid. But you can not do this: the mentioned parts do not move relative to each other and are unlikely to ever be rubbed.
Check the tightness of the wiring harness 2190-3724026 (water should not get into the passenger compartment along the inner walls of the corrugations).
How to fix.
We wrap with electrical tape the section of the harness from the branch to the crankshaft sensor to the entrance to the body, as well as the sections on the engine shield located next to the entrance of the wires to the passenger compartment.
Note. It's worth doing. It happened that water penetrated inside in this way and harmed the electrics.
Check the position of the diagnostic (second) oxygen sensor harness.
How to fix.
Slightly pull the harness out of the body, thus eliminating the tension of the wires.
Note.
Correct in theory, but in practice... The force is not strong enough to pull the wire out of the sensor. Much more likely that the latter will fall victim to low-quality gasoline.
Check if they are touching brake pipes battery pads.
How to fix.
Take a thicker screwdriver and carefully remove the tubes.
Note.
It is worth paying attention to the tubes, although again, it is only because of them that there is no need to run as fast as possible to the dealer: upon contact, the highway (we don’t even stutter about the site) will leak more than one thousand kilometers.
Seal technological openings of the floor in the front part of the body.
How to fix.
Pull out the 30 mm plugs (2108–5112090), apply Auto-7-94 mastic on them and insert them in their original place.
Note.
Instead of a rare mastic, any sealant will do. Or leave the stubs alone. After all, even if moisture, dirt or reagents penetrate into the cabin through them, their amount cannot be compared with what splashes onto the carpet from the rugs.
Relocate the harness for the control (first) oxygen concentration sensor.
Lada Granta is one of the latest innovations in the domestic auto market. Despite its “youth”, the car is already very popular and in demand among motorists, offering them an excellent combination of quality, comfort, reliability and affordability. Despite this, many owners this car dream of its tuning and technical refinement. That is why today we will talk about how do-it-yourself Grants tuning should be and what it includes.
Exterior tuning
It should be noted that compared to its predecessors new vaz the liftback looks quite presentable and very often the owners prefer to leave the appearance without significant changes, focusing their attention on other aspects of tuning. Those who do not accept everything standard make a number of changes to the exterior with their own hands, including:
- Installation of the front bumper with an improved air intake - such tuning updates the design of the VAZ liftback, while contributing to better airflow of the front brakes and power plant. The perfect solution for those who love sports and high speeds;
- Installation of new plastic fenders and other body elements - in addition to purely decorative benefits, the owner also gains material benefits, because such a body kit is not subject to corrosion and can last disproportionately longer;
- Installing a compact rear spoiler- it is placed on the lid of the cargo compartment, not only protecting the glass from dirt, but also improving the aerodynamics of the rear of the car;
- Optics tuning - standard headlights do not suit many owners, so they tend to replace them with improved samples. Alternatively, you can use a ready-made set of lighting equipment or select the headlights yourself;
- Installation of roof rails - their use is relevant for travel enthusiasts, and installation is so simple that even the most inexperienced driver can handle it without problems.
Internal alterations
Continuing tuning Lada Grant, you should pay attention to the interior of the cabin. There are also a number of aspects that can be changed with your own hands, namely:
Technical tuning
It is not entirely advisable to carry out significant tuning of the VAZ engine, which requires serious intervention in its design, especially on a new model. And in this case, most likely, you will have to forget about the guarantee. That is why today we will analyze those upgrade options that do not require drastic changes:
Conclusion
tuning vehicle- the process is quite laborious, lengthy and financially costly. If you still decide to upgrade your Lada Grant, remember that in order to obtain the highest quality and balanced result, the car upgrade should be carried out in a complex way, evenly distributing efforts across all the most significant components and assemblies. Only in this way you can give it not only a unique design, but also improved technical parameters.
Autotuning has recently become widespread. Modernization plunges not only old, but also new cars. The Lada Granta liftback is no exception. The main goals pursued by car owners are to increase power, improve handling, change the exterior and interior.
Tuning "Lada-Granta" do-it-yourself liftback
"Lada-Granta" in the back of a liftback, although it is modern car, which is offered in a large number of trim levels, but many owners still try to change and refine something in it, making the car different from the standard. Various tuning options allow you to make changes both to the car as a whole and to its individual systems and components. It is worth dwelling on such improvements in more detail.
Engine
Almost every owner would like to drive a more powerful and dynamic car. The weakest version of the Lada Grant liftback develops only 87 hp, and the most powerful version of the engine has a power of 106 hp, which is also unable to provide decent car dynamics. You can make the power unit more frisky without serious intervention in the design of the unit in the following way:
In addition to the listed engine upgrade options, you can install electronic pedal gas. This element will provide the most accurate response. power unit by pressing the pedal. New versions of such elements have an additional module that allows the driver to select the desired driving mode.
With a more serious approach to modernizing the Lada Grant engine in the liftback body, you can install a turbocharger, forged pistons and bore the cylinders. If you listen to the recommendations of experts, then such improvements must be carried out comprehensively, since equipping a car with only a turbine can damage the pistons as a result of increased load. Also, if you put only forged elements, then there will be no increase in power.
Chassis
In addition to engine improvements, the undercarriage of the machine (suspension brackets, levers, etc.) can also be upgraded. The model in question has a soft suspension, designed for driving on good roads. Any changes to the suspension can make it stiffer, which will have a positive effect on handling, but at the same time, comfort will decrease. Changes can be made to rear suspension, reducing the number of coils of springs by exactly one. To give the body rigidity when cornering, you can install strut extensions on the front end, the same as on Kalina.
To lower the Grants liftback suspension, you can choose one of the following methods:
- replacement of the suspension for a design with a variable ground clearance. Thus, the shock absorbers are given autonomous rigidity. In the summer, the car can be lowered, and in the winter it can be raised;
- replacement standard suspension to a new one with a lower landing. In this case, an appropriate set of springs and shock absorbers is selected;
- installation of low profile tires. This option allows you to reduce the landing and improve the handling of the car;
- equipping a car with lowered springs without replacing depreciation elements. This option will only be suitable for city driving.
In addition to the above improvements, you can make the following changes to the suspension:
If we consider changes in the brake system, then the simplest tuning option is to replace the standard brake discs with products of a larger dimension. In this case, when installing R14 disks instead of regular R13, no alterations are required.
Together with the disks, you can install foreign brake pads. The discs on the Lada Granta liftback can be supplied, for example, by Brembo (article: 09.8903.75), and the pads - by Fiat (article: 13.0460–2813.2).
Video: lowering the landing on the example of "Grants" in a sedan
Appearance
Exterior tuning is quite diverse and depends only on the imagination and financial capabilities of the car owner. To change the appearance, you can install or replace the following elements:
- roof rails. These products are to some extent capable of correcting some errors in the control system. They differ both in weight and in the degree of aerodynamics. The installation of such elements gives the machine an individual character;
- Luke. Such an addition can not only improve the design of the car, but also increase the comfort in the cabin in hot weather;
- spoiler. This element is one of the main external tuning, because it allows you to stabilize the car at high speeds. The color scheme and shape can be selected as desired after taking measurements from the machine;
- analog mirrors. In the Lada Grant standard, the liftback is equipped with manual mirrors. Instead, you can put elements from Kalina, which are configured electronically. If there is no desire to change mirrors, then heating can be built into standard devices;
- disks. Choice rims today it is quite diverse and can significantly transform a stock car. You can choose both cast and forged wheels of a suitable dimension;
- bumpers. Tuning these elements will add some emotional component to the appearance of the car. Most popular model front element is “I am a robot”, which perfectly replaces the standard product. It is also possible to install bumpers in specialized studios;
- radiator grille. You can buy a tuned part or modify it yourself. For this, an aluminum mesh is most often used, which improves protection against pollution;
- arch extensions. The pads not only protect the car body from dirt flying from under the wheels, but are also able to visually expand the car. The expanders are made of plastic and are fixed to the body with double-sided tape;
- door sills. The main function of these products is to protect thresholds from impacts and maintain paintwork. During the impact, the plastic takes it upon itself and in worst case will simply break, but the threshold itself will remain intact.
Salon
A lot of attention is paid to interior tuning, since this is where the owner and passengers spend most of their time.
Steering wheel cover
One of the first interior elements to be changed is wheel. Some owners change it to a sporty one with a smaller diameter. However, it should be borne in mind that driving a car becomes not very comfortable. Therefore, this option for upgrading the steering wheel is for an amateur. In addition, the steering wheel can be covered with leather to make it attractive, but to get a quality result, you will have to visit a specialized service. You can resort to a simpler option - installing a finished cover. The product is quite simply mounted, pulled together with threads, and, if necessary, removed without any problems. When choosing a cover, one should take into account the overall design of the Lada Granta liftback cabin.
Armrest
Another element of the interior that can be improved in the tuning process is the armrest. The choice of this part today is quite diverse, but since such products are mainly made in China, the most negative impressions can arise from the operation of such a product. The fact is that the body of the armrests is made of plastic, which cracks under the influence of the sun. The fastening of the part also leaves much to be desired. When opening and closing, a creak appears, the objects inside ring quite strongly, which also does not give any pleasure. Despite the many shortcomings, the Chinese armrests, if desired, can be modified by eliminating the negative points. To do this, the interior space is lined with dense foam rubber, and the outside of the product is sheathed with any finishing material (fabric, leather, alcantara, etc.).
Backlight
Interior lighting "Grants" liftback looks rather weak. There are several ways to improve the situation, but the most common is the installation of LED elements. To do this, the regular interior ceiling is dismantled and the diffuser is removed. For illumination, they purchase an LED strip for 18 elements, divide it into 3 equal parts and mount it on double-sided tape to the inside of the ceiling. Power is supplied to the tape from the wires led to the ceiling, taking into account the polarity.
Torpedo and dashboard
One of the interior elements that sets the overall aesthetics of the interior is dashboard. Initially, this detail is made in shades of gray, which clearly does not add beauty to the interior. If desired, the panel can be modified to make it more attractive. Of the tools and materials you will need the following list:
- dye;
- primer for plastic;
- solvent;
- acrylic lacquer;
- compressor.
To repaint individual elements of the tidy, they will need to be dismantled, cleaned and degreased. After the preparatory measures, the primer is applied, and then the products are left to dry. When the material is completely dry, start applying paint with a compressor. For the purposes under consideration, you can also use a paint brush, but the quality of the coating will leave the best. The best option- buy paint in an aerosol. Apply the paint material carefully so that smudges do not appear. After the paint has dried, the parts are covered with acrylic varnish and left to dry, then they are assembled. The torpedo itself, if desired, can be dragged with modern materials, for example, alcantara, carbon film, etc.
The Grants tidy in the liftback body is equipped with LEDs, but in terms of their light output they cannot be compared with foreign cars. To increase the brightness, standard LEDs are replaced with more powerful ones, the choice of which is quite diverse today. Such changes will make the panel brighter, which will positively affect the attractiveness of the interior and the mood of the owner.
Noise isolation
To increase the level of comfort, some motorists carry out additional soundproofing of their car, since regular processing is not enough. For a high-quality fight against extraneous noise, it is necessary to perform a comprehensive soundproofing of the cabin, i.e., process the doors, floor, engine shield, ceiling with special vibration and sound-absorbing materials. The first include Vibroplast, Vizomat, Bimast, and the second - Isoton, Accent.
For processing, it is necessary to completely disassemble the interior, that is, remove the seats, dashboard, trim and apply a layer of vibration isolation on bare metal, and sound-absorbing material on top of it. After coating the metal, the interior is assembled back.
Video: soundproofing "Grants" liftback
Additionally, you can cover the bottom of the car from the outside with bituminous mastic, reducing the level external noise while protecting the metal from corrosion.
Additional upgrade
Salon "Grants" liftback can also be improved by replacing the headlining, door linings and flooring. This process, as well as car tuning in general, involves considerable financial investments. For such a modernization, it will be necessary to dismantle the elements that are planned to be modified, and then drag them over with any modern material.
As for the seats, they can also be re-upholstered with a change in the design of the frame, for example, with sharpening for sports. But this requires not only appropriate materials, but also knowledge. An easier option is to purchase covers, the choice of which today is able to satisfy almost every car owner.
If the chairs for one reason or another have become unusable, then a complete restoration or replacement is indispensable. To increase comfort rear passengers, head restraints can be installed in the back of the seats, with which some Grants liftback models are not equipped. To do this, they purchase the head restraints themselves, attach them to them, dismantle the rear seatback, drill the necessary holes and install them.
rear shelf
Improvements to the rear shelf may be required in several cases:
- speaker installation;
- elimination of "crickets";
- finishing.
In the first case, the shelf must be dismantled, holes made according to the size of the dynamic heads and fixed.
To eliminate squeaks, Madeleine is used, which is glued along the perimeter of the fit of the shelf to the plastic side elements.
As for the finish, Carpet is most often used for the rear shelf. If you wish, you can fit it with any material by analogy with other elements of the cabin.
Trunk
One of the disadvantages luggage compartment is that during periodic loading, the mat is pressed into the spare wheel niche, and in the absence of the latter, it completely falls into it. To improve the situation, car owners modernize the trunk by installing a hard plywood bottom, followed by sheathing with leatherette or other materials.
Lighting system
Automotive optics is not complete without tuning. The easiest option is to install cilia on the headlights.
Cilia are a plastic part that is mounted on the top or bottom of the headlight.
Eyelashes are mounted on a special sealant or double-sided tape. Even installing such a simple element allows you to transform a car, making it more attractive. Improvements to the lighting system also include the installation fog lights, since they are absent in the basic configuration of the car in question. Under the fog lights in the front bumper there are holes covered from the factory with plastic plugs. Installing additional optics will not be superfluous at all, since it improves the illumination of the roadside and the road section directly in front of the car. Installation of fog lights is quite simple and almost every motorist can handle it.
If the installation of cilia and additional headlights seems insufficient to you, you can completely change the head optics. In this case regular lighting dismantled, and xenon or bi-xenon lenses are introduced instead. Such equipment in the kit has an auto-corrector of headlights and washers. Adjustment work is best done on special stands. Xenon lighting will allow you to replace only the dipped beam, and bi-xenon - near and far. The advantage of installing such equipment is a better ability to illuminate the road at night and in wet weather.