Portal for car enthusiasts

Engine oil for Kia seed 1.6. What kind of oil to fill in Kia Ceed

European C segment car Kia Ceed was introduced in 2006. The model was intended for the European market and is produced in Slovakia. In 2012, the updated Ceed began to be produced with a redesigned and richer equipment. The car has versions of 3 and 5-door hatchback and station wagon and is equipped with 1.4, 1.6 or 2-liter gasoline engines or 1.6 and 2-liter diesel, manual or automatic transmission gears and front wheel drive. Since 2013, a sports version of the Ceed GT has also been produced with a 1.6 turbo engine with 204 hp. Due to the relatively low cost for its class, the model has gained great popularity in Russia. What kind of oil to fill in the Kia Ceed engine depends on its type.

TOTAL QUARTZ 9000 HKS G-310 5W30 and TOTAL QUARTZ 9000 ENERGY 5W40

For Kia Ceed with petrol engines are recommended engine oils TOTAL QUARTZ 9000 HKS G-310 5W30 and TOTAL QUARTZ 9000 ENERGY 5W40. TOTAL QUARTZ 9000 HKS G-310 5W30 has been specially formulated for Hyundai cars and Kia and are used in many models at first fill. This engine oil for Kia Ceed has high anti-wear and cleaning properties, guaranteeing engine protection in all driving conditions and extending its life. Its high oxidation stability allows extended oil change intervals within those recommended by the manufacturer (up to 30,000 km, depending on operating conditions).

TOTAL QUARTZ 9000 ENERGY 5W40 engine oil is universal and can be used in Kia Ceed cars with gasoline engines and diesel engines without a particulate filter. This oil protects the engine from wear and harmful deposits even in the most severe operating conditions, including sport, city driving with frequent stops and cold starts. It meets API SN/CF and ACEA A3/B4 international standards and can be used with extended oil change intervals in Kia Ceed of both generations.

TOTAL QUARTZ INEO MC3 5W-30

TOTAL QUARTZ INEO MC3 5W-30 engine oil belongs to the Low SAPS category with a reduced content of phosphorus, sulfur and sulphated ash, and can be used as an oil for Kia Ceed equipped with diesel engine from particulate filter(DPF). This oil provides a high degree of protection against wear of the engine and exhaust aftertreatment systems, which guarantees their reliable operation for a long time.

Transmission oil for Kia Ceed

For Kia Ceed vehicles with 5- and 6-speed manual transmissions, TOTAL recommends TOTAL TRANSMISSION DUAL 9 FE 75W90 transmission oil. This oil reliably protects the transmission from wear and corrosion, and, thanks to FUEL ECONOMY (FE) technology, provides reduced fuel consumption compared to conventional lubricants.

The choice of oil for Automatic transmission Kia Ceed depends on the year of manufacture of the car. First generation cars (2006-2012) were equipped with a 4-speed gearbox, for which TOTAL FLUIDE XLD FE is suitable. Cars of the second generation (since 2012) have a more modern 6-speed automatic transmission, in which TOTAL FLUIDMATIC MV LV oil is recommended. These transmission oils guarantee smooth gear shifting and protection of the unit against wear and ensure long and reliable operation of the box.

Production model range Kia Seed started in 2006. In the fall of 2006, a middle-class car was first shown at an exhibition in Paris, after which its mass production began. For 11 years, the model has undergone several updates and is now being produced in the second generation. Ceed replaced the outdated Cerato and was originally developed to conquer the European market in the golf segment. The novelty quickly became on a par with competitors - Volkswagen Golf, Honda Civic and Toyota Corolla.

In the first generation, the model was equipped with gasoline and diesel engines of different capacities. The first consisted of units with a working volume of 1.4, 1.6 and 2.0 liters (90/110, 122/126 and 143 hp). Diesel modifications included turbodiesel units for 1.6 and 2.0 liters (90-140 hp). The listed engines worked either with manual transmission or 4-speed automatic. Information on oil consumption and which one to pour is indicated below. As for the consumption of gasoline, the Kia Ceed requires about 6 liters of fuel per 100 kilometers in the combined cycle. In 2009, the model underwent a cosmetic restyling, during which the car received a new look, emphasizing the corporate style, and a redesigned interior.

The second generation debuted in 2012 and Kia Seed was again subjected to external changes. Now the car has a pronounced sporty style. The engines have become a little more economical, and the car itself is more stable on the road. Russian deliveries included a 1.6-liter modification with a 129 hp engine. The atmospheric installation was paired with a 6-speed MT or AT. In terms of dynamics: the first 100 km / h was achieved in 10.5 seconds on the mechanics and 11.5 - on the machine. In 2013, a more charged version with 204 hp became available, delivering the first hundred in just 7.6 seconds. Fuel consumption for such a LED is up to 7.8 liters in the combined cycle.

Generations 1, 2 (2006 - present)

Engine Kia-Hyundai G4FA 1.4 109 and 110 hp

  • Oil types (by viscosity): 0W-20, 0W-30, 5W-30, 5W-40

Engine Kia-Hyundai G4FC 1.6 122, 126 and 129 hp

  • What engine oil is poured from the factory (original): Synthetic 5W30
  • Oil types (by viscosity): 0W-30, 0W-40, 5W-30, 5W-40
  • How many liters of oil in the engine (total volume): 3.3 liters.
  • Oil consumption per 1000 km: up to 1000 ml.
  • When to change oil: 7500-15000

Engine Kia-Hyundai G4GC 2.0 143 hp

  • What engine oil is poured from the factory (original): Synthetic 10W30
  • Oil types (by viscosity): 10W-30, 10W-40
  • How many liters of oil in the engine (total volume): 4.0 liters.
  • Oil consumption per 1000 km: up to 1000 ml.
  • When to change oil: 7500-15000

Kia Sid has been in production for 8 years. During this time, the package of models included 6 various engines, including diesel engines. Each of them has its own requirements for engine oil, which provides optimal operating conditions for the entire mechanism. You should also take into account the available mileage and the climatic region of operation, choosing an oil with the appropriate viscosity level.

Below is a rated overview of the best lubricants that you can confidently pour into Kia motors Ceed. They are able to provide not only high-quality operation with different levels loads and temperatures, but also to minimize the wear of internal combustion engine parts, increasing its resource.

The best semi-synthetic oil for KIA Ceed

This category of oils is a reliable lubricant for both new engines and engines with high mileage. Modern additive complexes allow semi-synthetic lubricants to have characteristics that are not inferior to synthetics.

4 HI-GEAR 5W-40 SL/CF

Best price
The country: USA (Produced in Russia)
Average price: 950 rubles.
Rating (2019): 4.4

One of the advantages of this oil is the absence of fakes on the market (this is not the most popular brand for motor lubricants). A high-quality base base and a set of modern additive complexes make it possible to confidently use Hi-gear in Kia Seed engines, which are operated under difficult conditions of intensive city driving.

The owners in their reviews confidently declare the good properties of the oil, a decrease in its consumption (for engines with high mileage, this is very important), fuel economy is observed when running long distances, and the level of noise and vibration during the operation of the internal combustion engine has decreased.

3 MOBIS SUPER EXTRA GASOLINE 5W-30

The most economical oil
Country: South Korea
Average price: 1,440 rubles.
Rating (2019): 4.6

Having started pouring this oil into the Kia Sid engine, the owner will notice positive changes in the operation of the engine after the first operating cycle, especially if its mileage has long exceeded 100 thousand km. For the most part, feedback on the use of Mobis super extra is positive. There is a noticeable fuel economy, the engine gets rid of accumulated deposits, its operation becomes more stable on idling. At negative temperatures, starting the motor does not cause difficulties even at -30⁰С.

All this became possible due to the high quality of the base oil and a modern additive package. They provide a low level of oxidative processes, protect against corrosion and ensure the stability of the lubricant in a wide range of operating temperatures.

2 COMMA X-FLOW TYPE F 5W-30

Reliable wear protection
Country: England
Average price: 1,640 rubles.
Rating (2019): 4.8

The oil is suitable for use in a Kia Sid car, fully complying with the requirements of the plant. The fluid remains stable both at high engine operating temperatures and in cold weather, providing engine start at -35⁰С. The low sulfur content not only makes the product more environmentally friendly, but also allows the oil to take care of the engine more gently.

Infineum's additive package provides corrosion protection and excellent detergency by completely dissolving deposits due to its high alkalinity (9.94). A high degree of wear protection has been achieved thanks to additives based on Zn and Ph atoms. This allows not only to ensure high-quality operation of the engine with high mileage, but also to increase its service life.

1 LIQUI MOLY SPECIAL TEC LL 5W-30

The best set of detergent additives
Country: Germany
Average price: 2,782 rubles.
Rating (2019): 4.9

The base oil obtained by hydrocracking technology from heavy petroleum products is not inferior to pure synthetics in its characteristics, which guarantees excellent fluidity and allows high-quality lubrication of all rubbing surfaces in the engine. An advanced set of modern additives adds properties to the lubricant that provide:

  • Better oil circulation through the system at low temperatures;
  • Economy of gasoline, low level of harmful emissions;
  • Cleanliness of parts and oil supply channels, washing out and dissolution of deposits in the lubrication system;
  • High wear protection.

To fill Special TEC LL into the Kia Sid engine, when replacing, you should thoroughly flush the engine - the manufacturer does not recommend mixing this lubricant with other oils. In the reviews of drivers using this oil in the engines of their cars, there is a positive assessment of the characteristics listed above.

The best synthetic oil for KIA Ceed

Synthetics are best adapted for lubrication modern engines car KIA Ceed, is able to reliably protect the mechanism from corrosion phenomena, prevent precipitation and the formation of deposits in the oil channels of the motor. In addition, modern high-tech additives, including ester compounds, provide maximum protection against friction, reduce wear of parts, and, accordingly, increase engine life.

5 ENI/AGIP I-SINT MS 5W-40

Attractive price. Exclusive set of additives
Country: Italy
Average price: 1,826 rubles.
Rating (2019): 4 4

The exceptional quality of this synthetic meets all the requirements of high-energy modern engines, which include the Kia Seed. Modern additive package contains a minimum of metals, which makes emissions more environmentally friendly, extends the life of diesel particulate filters (if any) and exhaust system. An in-house research center located in Milan provides the products with state-of-the-art, exclusive additive components, which are first tested by the top Formula 1 championship teams.

In their reviews, drivers characterize this oil as economical, having a constant viscosity during operation, including at low temperatures. The oil retains the stability of its properties throughout the entire life cycle, which is limited by the recommendations of the automotive manufacturer.

4 CASTROL MAGNATEC 5W-30 A3/B4

The "smartest" oil. Best wear protection
The country: England (produced in Russia, Belgium)
Average price: 1,880 rubles.
Rating (2019): 4.5

The popularity of this oil has been at a fairly high level for quite a long time, confirming its high quality. Basic characteristics also meet the requirements for Kia Sid engines, so there are no obstacles to pouring Castrol magnatec into the engine of this car.

The unique ability of this fluid to form a thin but strong oil film on the surfaces of friction pairs provides reliable protection against wear, and also helps to safely start the engine when severe frosts. When idle, even for a long time, the oil membrane does not collapse, but remains on the parts, thereby providing lubrication in the first seconds after starting the engine, until the pressure in the lubrication system reaches operating parameters. The oil also keeps the engine clean, stopping corrosion processes and preventing the formation of soot deposits and soot.

3 MOTUL 8100 X-CLEAN+ 5W30

Increases resource. Effectively cleans the engine
Country: France
Average price: MOTUL 8100 X-CLEAN + 5W30
Rating (2019): 4.7

The oil is a mixture of the purest synthetic base and a set of additives created according to modern and unique technologies. Regardless of the period of operation, its nature and intensity, ambient temperature, Motul x-clean does not change its characteristics (including viscosity), remaining stable for a long time, significantly exceeding the traditional replacement period. It has an excellent washing effect, dissolves accumulated deposits, which, when replaced, will be removed from the engine along with used oil.

Some reviews describe the excess of the permissible service life of the lubricant, which did not cause even the slightest harm to the motor. In addition, the oil does an excellent job in severe frosts, effectively reduces friction, and prolongs engine life.

2 SHELL HELIX ULTRA ECT 5W-30

Buyer's best choice. Saves fuel
The country: Netherlands (produced in Russia)
Average price: 2,260 rubles.
Rating (2019): 4.9

This oil has direct factory recommendations for filling in Kia Sid. Possesses good oxidizing properties, interferes with corrosion and formation of deposits. This is facilitated by a group of additives Active Cleansing and the purest synthetic base obtained from natural gas using PurePlus technology. The absence of waste consumption and noticeable fuel savings (up to 1.7%) are also the advantages of this popular oil.

Once using this oil, the owners, as a rule, continue to fill it further into the engines of their cars. The few that leave bad reviews(telling how they almost “killed” their pet’s motor with this lubricant), they most likely became victims of fraudulent sellers who, under the guise of a popular brand, slipped it a cheap imitation. This main drawback can be easily eliminated by being more attentive to the seller - a decent businessman will never exchange for momentary benefits.

1 MOBIL 1 FUEL ECONOMY 0W-30

The most popular oil Easy start in severe frosts
Country: Finland
Average price: 2,976 rubles.
Rating (2019): 4.9

Ideal for operation in the northern regions of the country, providing a stable engine start in severe frosts. A carefully selected additive package does not contain heavy metals, so that exhaust gases cause significantly less damage to the environment.

Why do you need oil in the power unit auto kia LED? What role does it play?

Advanced motorists know for sure that there is oil in the power unit of a car. It needs to be changed periodically! What for? The fact is that the oil poured into the unit carries a number of important functions due to their special properties. After a certain period of time, its characteristics come to naught, worsen. So it's time to replace it.

So what are the functional tasks assigned to engine oil?

  • Protection power unit from overheating
  • Engine protection against wear and corrosion
  • Friction reduction
  • Removal of small particles of wear products of the power unit, including combustion products

Oil classification

Today automotive market it’s just “teeming” with various fuels and lubricants, including motor oils. How to understand the intricacies of labeling? How to translate it into simple human language? Knowledge of the classification allows you to accurately select the right "blood" for the "heart" of the car!

All oils are divided into three categories (3 types)

  • Synthetics
  • Semi-synthetics
  • mineral oils

subdivided lubricants and by type of power unit

  • For petrol engines
  • Units consuming diesel
  • Separately, there are oils that are poured into turbocharged engines

Viscosity

These are viscosity-temperature characteristics. Simply put, these are the set parameters for the high-quality operation of the engine. The determination of the viscosity of many motorists is stupor. This value largely affects the choice of oil. It is recommended to buy exactly the oil that is indicated by the manufacturer. In extreme cases, consultations at the service station will not interfere.

Price

Not unimportant, sometimes a decisive factor when choosing an oil. The buyer has three options:

  • Buy oil on the market.

The money savings are significant. There is a proportional risk of buying a fake! You decide what is more important to you. Instant savings, or maybe you have extra money for unscheduled engine repairs?

  • Buy at the service station.

Expensive. Big twists. But the risk that you are "sucked in" by a fake is reduced!

  • As an intermediate option (many motorists are inclined to it) - buying in specialized stores. And the price is lower than at the service station, and the probability of acquiring a fake is much lower than at the car market!

What to fill in KIA LED and how much?

Which engine oil is suitable for Kia Sid? What exactly to fill in your favorite car is up to you. Don't forget to check the service book before doing this! It indicates which oil is RECOMMENDED! It is also a question of the PREDICTIVITY of such a replacement (after how many kilometers traveled to change).

For cars manufactured before 2008, 5w30 synthetics are suitable. The filling volume is 3 liters. Vehicles produced after 2009 will require 5.9 liters when replacing. All the same synthetics 5w30.

Description of 5w30 oil


GM Super Synthetic Longlife 5W-30- high-quality synthetic engine oil, used for power units. Feature: all season. Recommended to use:

In engines running on gasoline and diesel power units.

This is a long life oil. Good viscosity allows the power unit to work stably at elevated temperatures. Protects the unit from precipitation, premature wear, oxidation of rubbing surfaces. Keeps the power unit in perfect condition (cleanliness), including when high temperatures.

Cold starts (starting the unit) are easy, without failures due to the low viscosity of the oil. Increases performance catalytic converter reducing harmful emissions into the atmosphere. Caring for the environment is a must for milestones.

Change your oil on time! Take care of the "heart of the car"!

If you “because of your forgetfulness” were not able to change the oil on time, and the “lag” from the planned replacement does not exceed 1-2 thousand km of the car’s run, there is nothing to worry about. Things are much worse if the lag schedule is in the region of 5000 km! Such "forgetfulness" can lead to undesirable serious consequences.

Here is a table (as an example), with which it is easier to choose oils for an engine based on viscosity for operation in various temperature conditions. It all depends on the temperature of the region where the KIA LED car is operated.

How to change oil and oil filter in KIA engine seed? We will consider this issue another time. I would like to say that when working with any oils, you must follow the elementary safety rules. After all, fuels and lubricants belong to a high-risk group. In an article about changing the oil and oil filter on a KIA SID car, let's dwell on the issue of safety in more detail. Let's talk on the topic: change the oil yourself "for free" or entrust such work to service station specialists for "their hard-earned money". We will tell you in detail how to change the oil yourself.

We wish quiet operation to your engine for many years the "heart" of the car. Take care of him. Do not bring to a car heart attack.

14.06.2017

In order to choose which oil to pour into the Kia Sid engine, you need to understand its main characteristics, markings, trademarks, type, and some more points. If you take into account the most important of them and do not make a mistake with the choice of the manufacturer, you can choose the ideal fluid that will effectively protect engine parts from wear for a long time, under different conditions of use with minimal consumption. To find out the main characteristics of LED oil, you can refer to the instruction manual, however, there is little information about the types of liquid and its manufacturers, so the choice is limited to one or two brands. To choose from a wide range of car dealerships, you should know a little more.

Kia Pro'Ceed 1.6 GDI

Viscosity class and volume

The viscosity class determines the ability of an engine oil to maintain the necessary lubricating properties under different temperature conditions. Fuel consumption and its operation in the cold season depend on the viscosity of the oil, which especially affects the engine start and warm-up. At low temperatures, it is better to use a fluid with a low viscosity coefficient, this has a positive effect on the economy of the car and the protection of engine working surfaces from wear. At high ambient temperatures in the heat, it is better to choose an oil with a high viscosity.

Modern automotive engine oils use the SAE coefficient to indicate viscosity. It is usually indicated on canisters as one of the main markings. It consists of two numbers separated by the letter W and the sign "-". Both of these are viscosity coefficients under different conditions. The first indicates the temperature at which oil can be pumped through the system and ensure that the engine cranks at start-up. The second shows the viscosity when the motor is heated to operating temperature.

Table of temperature ranges for engine oils according to SAE

IN Kia cars It is recommended to use engine oil with a viscosity of SAE 5W-30 or 5W-40. This coefficient ensures optimal engine operation in a wide temperature range from -30 to 50 degrees. It is this marking that Kia recommends for its cars in European countries, regardless of the type of engine, its volume and the presence of a turbocharger.

Volume motor Kia The LED depends on the modification of the power unit and is:

  • 3.6 liters for gasoline engines 1.4 MPI, 1.6 MPI, 1.6 GDI;
  • 4.5 liters for 1.6 petrol engines with a T-GDI turbine;
  • 5.3 l. for diesel engines.

Resource

One of the important indicators of the quality of engine oil is its resource, that is, how long it can work without losing its characteristics. Most auto manufacturers recommend changing this fluid about every 15-20 thousand kilometers. However, oil manufacturers often claim that their products can run several tens of thousands of kilometers without replacement and, at the same time, normally protect the engine from wear. Who is exaggerating and who is being reinsured? The fact is that none of them can know exactly how much oil is able to drain in your car due to the fact that its resource is highly dependent on the conditions in which the car is used. The car owner himself must monitor the condition of the engine oil and determine the need for its replacement. If this is problematic, it is best to follow the change intervals recommended by the machine manufacturer.

The following factors affect the condition and life of engine oil:

  • Operating conditions of the car, the presence of so-called difficult conditions (traffic jams, dust, cold season, transportation of goods, and so on);
  • The age of the car and its engine;
  • fuel quality;
  • The quality and technology of the oil change procedure.

For MPI LED engines, when using 5W-20, 5W-30 oil normal conditions, Kia recommends a replacement interval of 15,000 km or 12 months. For GDI - 10,000 km or 6 months. In harsh operating conditions, and these include most conditions in big cities and other areas of Russia, the interval is recommended to be reduced to 7,500 km and 6 months for MPI and 5,000 km or 6 months for GDI.

Type of working fluid

At the moment in automotive engines several types of engine oil can be used, differing in the type of production:

  1. Mineral;
  2. Semi-synthetic;
  3. Synthetic.

Mineral oil is obtained by distilling crude oil, after which it is enriched with special additives to improve performance. This type of oil has been used for a long time and has a number of advantages, despite the fact that other types, mainly synthetics, are now replacing it.

Manufacturers often fill new cars with mineral oil on which the car can ride the entire break-in process. Some Kia models can be sold in showrooms with mineral water in the engine. This is due to its low price and the absence of the need for long-term use (the first MOT with a replacement of about 5,000 km). In some countries, car manufacturers recommend mineral motor oil for use as original oil. This is also due to the fact that it is considered more environmentally friendly than synthetics.

Semi-synthetic motor oils are obtained by adding synthetic additives to mineral oils or by mixing them with synthetics. These types of liquids are not very common, there are also few of them on sale due to displacement by the synthetic type.

Now in Russia, mainly synthetic motor oils are sold, they are also used for replacement. These fluids are obtained by chemical means, in which it is possible to obtain a composition that meets modern specifications and has better characteristics.

Compared to other types of oils, synthetic oils have a number of advantages:

  • Compliance with higher requirements and complex specifications, which makes it possible to develop lubricating fluid for a certain modification of the engine, taking into account its features;
  • Better resistance to wear of working surfaces;
  • Fracture resistance and viscosity stability at high and low temperatures;
  • Possibility of work in forced engines with high speed of rotation crankshaft and turbines;
  • Low oil consumption;
  • Increased replacement frequency;
  • Reduced fuel consumption.

The disadvantages of synthetics include a relatively high price and a more complex disposal process.