DIY auto tips. Useful DIY car crafts

Nowadays it's hard to surprise someone new model car, but vehicle, made by hand, has always attracted attention and excitement. A person who makes a car with his own hands expects two scenarios. The first is admiration for the creation, and the second is the smile of others at the sight of the invention. If you figure it out, then there is nothing complicated in assembling a car with your own hand. From a self-taught engineer, you only need to know the design of the car and the basic properties of its parts.

Historical facts

The beginning of the construction of cars was preceded by some historical conditions. During the existence of the union, mass production of cars was carried out. They could not meet the individual needs of the consumer. That is why self-taught inventors began to look for ways out of this situation and did this by designing homemade cars.

In order to make one car with your own hands, three non-working ones were required, of which all were removed necessary spare parts. If we take into account people living in remote villages, they most often improved various bodies, thereby increasing their capacity. Cars began to appear that had high cross-country ability and could even overcome water. In a word, all forces were thrown to simplify life.

A separate category of people attached great importance to the appearance of the car, and not just its technical properties. In addition to beautiful cars, sports cars were made that were not much inferior to factory copies. All these inventions not only surprised others, but also became full-fledged road users.

At times Soviet Union there were no specific restrictions on homemade vehicles. Prohibitions appeared in the 80s. They concerned only certain parameters and technical characteristics of the car. But most people could get around them by registering with the relevant authorities one vehicle under the guise of a completely different one.

What you need to assemble a car

To proceed directly to the assembly process itself, you need to think through everything in detail. It is necessary to clearly understand how to do future car, and what technical characteristics it should have. First you need to determine for what purposes the car will be used, and then implement the idea. If you need a frank workhorse, then in order to make it yourself, you will need special materials and parts. It is also important to make the body and frame of the car as resistant to stress as possible. When a car is made only for driving, the question is only in its appearance.

How to make a car with my own hands for a child, you can find out from the following video:

How to make drawings

You should not trust your head and imagination, it would be better and more correct to think about what exactly the car should be. Then transfer all available considerations to paper. Then it is possible to correct something and as a result, a drawn copy will appear future car. Sometimes, for complete certainty, two drawings are made. The first shows the appearance of the car, and the second is a more detailed image of the main parts in detail. Before drawing, you need to prepare everything necessary tools, that is, a pencil, eraser, drawing paper and a ruler.

Nowadays, there is no need to draw a picture for a long time with a regular pencil. To facilitate this task, there are special programs that have wide capabilities and with their help you can make any drawing.

Advice! If there are no engineering programs, then the usual Word test editor will help in this situation.

With a strong desire, you can make any car with your own hands. If there are no own considerations, then ready-made ideas and drawings can be borrowed. This is possible because most people involved in the creation of homemade cars do not hide their ideas, but, on the contrary, present them to the public.

kit-cars

In the vast countries of Europe and America, the so-called "kit-cars" have become widespread. So what is it? This is a certain number of different parts with which you can make a car with your own hands. Kit cars have become so popular that there are many variants of kit cars that allow you to fold any car model you want. The main difficulty is not in the assembly, but in the registration of the car obtained as a result of the assembly.

To fully work with a kit car, you must have a spacious garage. In addition, you need tool kits and knowledge. If you do not have certain skills, then the work will not give the desired result. If the work is done with the help of assistants, the assembly process will be faster and more fruitful.

This kit includes everything from small screws and instructions to large parts. For full-fledged work, there should not be serious difficulties. It should be noted that the instruction does not have a printed form, but is presented by a video master class, where everything is considered to the smallest detail.

It is very important to assemble the car correctly. This is necessary in order for the creation to meet all the standards and norms prescribed in the regulations of the traffic police. Since non-compliance with the points leads to problems with registering the vehicle with the relevant authorities.

Advice! If there is such an opportunity, then you can consult with experts in this field.

You can learn more about what kit cars are and how to make them in the following video:

Building a car with scrap materials

To make it as easy as possible for yourself to assemble a homemade car, you can take the base of any other car that is fully functioning as a basis. It is best to take the budget option, since it is never known which way the experiments will lead. If there are old worn parts, then they must be replaced with serviceable ones. If possible, you can make parts with your own hands on lathes, but this is if you have professional skills.

First of all, you need to start assembling the car with the body, instruments and necessary interior parts. Modern inventors use fiberglass for the body, but before there was no such material, and plywood and tin material were used.

Attention! Fiberglass is a fairly elastic material, which allows you to implement any idea, even the most unusual and original.

The availability of materials, spare parts and other components makes it possible to design a car that, in terms of external parameters and appearance, will not be inferior to car models of the world's leading automakers. This requires ingenuity, good imagination and certain knowledge.

DIY supercar:

Building a car from fiberglass

Start assembling a car from fiberglass should be from the moment of choosing a suitable chassis. After that, the selection of the necessary units is carried out. Then it’s worth moving on to the layout of the cabin and mounting the seats. Upon completion of this, the chassis is strengthened. The frame must be very reliable and strong, since all the main parts of the car will be mounted on it. The more accurate the dimensions of the space frame, the better the parts fit together.

For the manufacture of the body is best to use fiberglass. But first you need to make a base, that is, a frame. Styrofoam sheets can be attached to the surface of the frame, as closely as possible corresponding to the available drawings. Then, if necessary, holes are cut out, and, if necessary, the parameters are adjusted. After that, fiberglass is attached to the surface of the foam, which is puttied and cleaned from above. It is not necessary to use foam plastic, any other material with a high level of plasticity will come in handy. Such material can be a continuous sheet of sculptural plasticine.

It should be noted that fiberglass tends to deform during operation. The reason is the effect high temperatures. To maintain the shape of the structure, it is necessary to inner side strengthen the frame with pipes. All excess parts of the fiberglass must be removed, but this should be done after it is completely dry. If everything is done correctly and there are no other works regarding the design, you can proceed to the interior equipment and electronics fasteners.

If it is planned to re-design in the future, then a special matrix can be made. Thanks to her, the body manufacturing process will be faster and easier. The matrix is ​​applicable not only to make a vehicle with your own hands from scratch, but also to improve the condition of your own car. For the manufacture of paraffin is taken. To get a smooth surface, you need to cover it with paint on top. This will increase the convenience of fastening parts for a new car body.

Attention! With the help of the matrix, the entire body is made completely. But there is an exception - this is the hood and doors.

Conclusion

In order to implement the existing idea and make a car with your own hands, there are a number of suitable options. All sorts of working details will be useful here.

With your own hands you can do not only a car, but also a larger and more powerful truck. In some countries, craftsmen manage to earn decent money on this. They make cars to order. Cars with various original body parts are in great demand.

How to make a Porsche with your own hands:

Many dream of their own car, but only a few find the strength, inspiration and desire to work hard and painstakingly to create their own dream car. It is these desperate self-taught people who do automotive world more interesting, saving him from the boredom of assembly line production. It is their creations that sometimes attract the attention of others more than the top models of famous manufacturers.

Today we want to introduce you to the best homemade cars from around the world. Our rating includes really worthy homemade products that can be sent into mass production even today, without fear of low demand at all. Most of the cars included in the rating will easily be able to compete with the cars of large manufacturers, but, unfortunately, they will forever remain in a single copy, delighting the public only at various auto shows. However, this is what makes them special, inimitable, unique, and allows their owners to feel like heroes who alone managed to create a truly worthy car. So, let's start.

There are only five homemade products in our rating. It could have been more, but we decided to confine ourselves to cars that have passed all the necessary certification and are registered, i.e. all participants in the rating are allowed to drive on public roads without any restrictions. This only confirms their quality and uniqueness, and also speaks of a real opportunity to compete with production cars.

Fifth place was given to the SUV " Black Raven”, built in Kazakhstan. This unique car, designed for hunting in the steppe, has a menacing and at the same time futuristic design. The "Black Raven" could boldly act in science fiction films or even act as an army vehicle, but it is used only by its creator - a modest self-taught engineer from Karaganda.

The appearance of the SUV is really original, a little awkward, but original and brutal. "Black Raven" - real male car with a powerful frame chassis, riveted aluminum hull panels, multi-eyed optics and all-terrain wheels ready to bite even into difficult ground. The Black Raven is rushing into battle due to the powerful American-made V8 engine, which works in conjunction with an automatic transmission and a gearbox from the ZIL-157, located on rear axle. Excellent driving performance off-road vehicles are guaranteed by a long wheelbase, a wide track, a central location of the engine and gearbox, as well as independent suspension with torsion bars from armored personnel carriers. All this allows the car to maintain stability during sharp maneuvers even at a speed of about 100 km / h and easily overcome pits and bumps encountered on the way.

Salon unique homemade designed for two passengers. The equipment of the jeep includes LED brake lights and turn signals, electric windshields, electric hood and a unique chain-driven self-puller mounted in the bottom. As for the price, the approximate cost of the Black Raven is about 1,500,000 rubles.

Move on. On the fourth line we have the first ever Cambodian car- "". Oddly enough, it was not created by the state or private automobile company, but simple mechanic Nhin Feloek, who decided that at 52 it was time to get his own car.

Angkor 333 is a very compact two-seater roadster with a very modern filling and quite attractive design, especially for a poor Asian country.

Cambodian homemade body received a streamlined body, stylish optics and modern aerodynamic elements. Moreover, Angkor 333 is a hybrid car equipped with a traction electric motor, a 3-speed automatic transmission and a 45-horsepower gasoline unit for recharging battery. Surprisingly, a homemade roadster is capable of accelerating to 120 km / h and covering about 100 km on a single battery charge. In addition, the equipment of the Angkor 333 includes touchscreen, acting as a dashboard, and the doors are opened by means of a special magnetic plastic card. Even most production cars do not have such functions, so the development of a talented mechanic is worthy of respect.

The first Angkor 333 was assembled in 2003. In 2006, the creator introduced the second generation of his brainchild, and in 2010, a modified third-generation car saw the light, which to this day is manually assembled in small batches to order in the garage of Nhin Feloek, providing a retired mechanic a comfortable old age. Unfortunately, nothing is known about the cost of the roadster.

In third place in our ranking is the car, which is most often called "". This impressive SUV was created by Vyacheslav Zolotukhin from Krasnokamensk, Trans-Baikal Territory. The homemade product is based on a modified GAZ-66 chassis, supplemented with converted shock absorbers from KAMAZ, front detachable hubs and a power steering from a Hino truck.

The Mega Cruiser Russia is driven by an atmospheric 7.5-liter Hino h07D diesel engine, which received a KAMAZ air cleaning system in the process of refinement. The engine is assisted by a 6-speed manual gearbox and a transfer case from the GAZ-66, in which all bearings were replaced with imported ones. The homemade drive is complete, with the ability to block the bridges in which the main pairs were replaced, which made it possible to achieve a smooth ride on paved roads.

The body of the Mega Cruiser Russia is metal, prefabricated, attached to the frame through 12 shock-absorbing supports. The "living area" is a modified cabin of the Isuzu Elf truck, which is also attached to the converted "back" of the Noah minivan. The front part of the body consists of modernized wings from the GAZ-3307, a hood of its own design and a radiator grille molded from several copies of the grille Land cruiser Prado. Homemade metal bumpers, own development, but wheel disks“Riveted” from GAZ-66 wheels, which made it possible to install rubber from the TIGER army jeep.

If you look into the salon, we will see 6 seats, a lot of free space, right-hand drive, a pretty nice interior and a comfortable driver's seat with excellent visibility in all directions.

Mega Cruiser Russia is equipped with a 150-liter gas tank, a gyroscope, an electric winch with a force of 6 tons, an audio system and even a spoiler. According to the author of the homemade product, the SUV is capable of accelerating to 120 km / h, its weight is 3800 kg, and the average fuel consumption is 15 liters on the highway and about 18 liters off-road. Last year, Mega Cruiser Russia was put up for sale by the creator at a price of 3,600,000 rubles.

The second line of our homemade rating is occupied by another unique SUV, this time from Ukraine. It's about the car Buffalo", also built on the basis of the GAZ-66. Its author is Alexander Chuvpilin from Belaya Tserkov, Kyiv region.

"Bizon" received a more modern and more aerodynamic appearance, the originality of which is emphasized, first of all, by the front of the body. The creator borrowed most of the body panels from the VW Passat 64, but some elements had to be made independently.

Under the hood of the Ukrainian homemade product is a 4.0-liter turbodiesel with a return of 137 hp, borrowed from Chinese truck Dong Feng DF-40. He also gave the "Bizon" and a 5-speed mechanical box gears. In a pair, Chinese units provided a home-made SUV with the ability to accelerate to 120 km / h with an average fuel consumption of 15 liters per 100 km. permanent drive Bizon has a rear one, with the ability to connect the front axle, lock the differential and use a low gear.
The car is able to overcome fords up to 1.2 meters deep, and is also equipped with a tire pressure adjustment system with an additional outlet for domestic needs: pumping boats, using a pneumatic jack or pneumatic tools, etc.

The body of the "Bizon", planted on 12 pillars, is reinforced with numerous stiffeners and a frame frame, and the roof of the SUV is made of metal 2 mm thick, which made it possible to place a drop-down tent on it for the night. One of the features of the "Bizon" is the nine-seater layout of the cabin (3 + 4 + 2), while two rear seats that can turn in any direction can be removed, allowing you to increase the free space of the luggage compartment. In general, the Bizon has a comfortable and spacious interior with high-quality finishes, comfortable chairs and a front panel with two glove compartments.

Among the numerous equipment installed on the Bizon, we highlight the presence of a power steering, a double power steering brake system, rear view camera, GPS navigator, electric winch, special headlights reversing and retractable footrest back door. Alexander Chuvpilin spent about $15,000 to create Bizon.

Well, it remains only to name the winner, which, of course, could only be a sports car, because every motorist dreams of a racing car. A simple self-taught person without a technical education, a Chelyabinsk resident Sergei Vladimirovich Ivantsov, who conceived the idea of ​​building his own sports car back in 1983, also dreamed about it. A car with a simple name ISV”, consisting of the initials of the creator, was built for about 20 years and during this long journey managed to survive two prototypes, molded on a scale of 1: 1, first from window putty, and then from plasticine. At the same time, according to the creator, he did everything “by eye”, doing without drawings and calculations.

From the plasticine model, Sergey sculpted plaster casts of the details of the future body, after which he painstakingly pasted them out of fiberglass and epoxy resin. Here it is worth mentioning separately that the creator of this masterpiece is allergic to epoxy, and therefore he had to work in an army gas mask, sometimes spending 6-8 hours in it. What can I say, the perseverance with which he went to his dream deserves respect, and the result of his work impresses not only ordinary onlookers, but also experienced specialists automotive industry. In terms of design, the homemade ISV is ready to compete with many sports cars currently being produced, and in fact the final concept of a sports car was conceived 15 years ago. As Sergei himself admitted, he drew inspiration from the Lamborghini Countach, but if you look closely, you can catch notes of Aston Martin, Maserati, and even Bugatti in the appearance of ISV.

The ISV is based on a spatial welded frame made of square pipes, and the entire chassis and suspension are borrowed from the Niva with minor modifications. Drive at ISV, as befits a good sports car, only rear. As for the engine, initially the homemade product received a modest engine from the “classics”, but then it gave way to a 4-cylinder 1.8-liter engine with 113 hp. from the BMW 318, paired with a 4-speed "automatic". Unfortunately, due to his great love for his offspring, Sergey never loaded ISV on full power, so we will probably never know the true speed capabilities of the car. The author of the sports car himself drives quite carefully and does not accelerate more than 140 km / h.

Let's take a look at the ISV salon. Here is a classic sports car 2-seater layout with an interior tailored to the driver's comfort as much as possible. And this is not surprising, because the interior is made by hand, it has been repeatedly refined and redone. Here, as well as in the exterior, you can see the concept of interior design worthy of a sports car, some details of which also resemble the style of cars from famous manufacturers. The ISV has a removable roof, guillotine doors, air conditioning, power steering, a stylish instrument panel from Audi and an audio system.
It is difficult to talk about the price of ISV. The creator himself considers his car priceless and, according to some reports, once refused to sell it for 100,000 euros.

That's all, we introduced you to the most interesting and high-quality home-made cars of recent times, approved for use on public roads. Each of them is unique, original and interesting in its own way. But all together, they certainly left their bright mark in the history of the global automotive industry and gave a lot of positive emotions not only to their creators, but also to numerous visitors to various automobile exhibitions and shows. We hope that the number of lovers of creating masterpiece cars in their garage will only grow, which means that we will have reasons for new ratings.

Some motorists are categorically not satisfied with cars manufactured official manufacturers. And then they decide to create home-made cars that will fully satisfy all the individual wishes of the owner. And today we will talk about the 10 most unusual of these vehicles.

Black Raven - homemade SUV from Kazakhstan

The black raven is perfect car for the Kazakh steppe. It is fast, powerful and undemanding to use. This unusual SUV was made from scratch by an enthusiast from the city of Karaganda.

Black Raven has a 5-liter engine with a capacity of 170 Horse power, thanks to which the car can accelerate to a speed of 90 kilometers per hour when driving over rough terrain and off-road.

Angkor 333 - homemade electric car from Cambodia

Angkor 333 is the first fully electric car, created in the Kingdom of Cambodia. It's amazing that this machine is not the result of the development of the auto industry in the country, but a private project of one person - a modest mechanic from Phnom Penh.

The author of the Angkor 333 dreams that in the future he will open his own factory for mass production of both electric and gasoline versions of this car.

Homemade Batmobile from Shanghai

Fans of Batman films around the world dream of the Batmobile, a superhero car with an amazing design that has many different features that are not available in ordinary production cars.

And engineer Li Weilei from Shanghai decided to realize this dream with his own hands. He created a real Batmobile, as if descended from the screens of cinemas. At the same time, the Chinese spent less than 10 thousand dollars on the construction of this machine.
The Shanghai Batmobile certainly doesn't have ten different types weapons and does not drive at a speed of 500 kilometers per hour, but in appearance he exactly repeats the Batman car shown in the latest films about this hero.

Homemade car for racing Formula 1

A real Formula 1 car costs a lot of money - more than a million dollars. So there are no such cars in private ownership. At least their official versions. But craftsmen from all over the world create copies of racing cars with their own hands.

One such enthusiast is Bosnian engineer Miso Kuzmanović, who spent 25,000 euros to create a Formula 1 street car. The result is an incredibly beautiful 150 horsepower car that can reach speeds of 250 kilometers per hour.
Driving this red car through the streets of his city, Kuzmanovich earned the nickname "Bosnian Schumacher".

Old Guo - homemade car for $500

Chinese farmer Old Guo has been fond of mechanics since childhood, but has worked as a farmer all his life. However, after the fiftieth anniversary, he decided to follow his dream and began to develop a car of his own production, which was named after the inventor - Old Guo.

Old Guo is a compact copy of Lamborghini, designed for a children's audience. But this is not a toy car, but real car with an electric motor, which can travel up to 60 kilometers on a single battery charge.
At the same time, the cost of one copy of Old Guo is 5,000 yuan (slightly less than 500 US dollars).

Bizon - homemade SUV from Kyiv

A resident of Kiev, Alexander Chupilin, together with his son, assembled their own SUV from spare parts from other cars, as well as original parts, which they called Bizon. Ukrainian enthusiasts got a huge car with a 4-liter engine with a capacity of 137 horsepower

Bizon can accelerate to a speed of 120 kilometers per hour. Combined fuel consumption of this car is 15 liters per 100 km. The interior of the SUV has three rows of seats that can accommodate nine people.
Also interesting is the roof of the Bizon car, which has a built-in tent for spending the night in the field.

Super Awesome Micro Project - a homemade pneumatic car from LEGO

The LEGO constructor is such a versatile material that even a completely working car can be constructed from it. At least two enthusiasts from Australia and Romania succeeded in this, establishing an initiative called the Super Awesome Micro Project.

Within its framework, they built a car from a LEGO constructor that can move thanks to a 256-piston pneumatic engine, while accelerating to a speed of 28 kilometers per hour.
The cost of creating this car was just over 1 thousand dollars, of which most of the money went to the purchase of more than half a million LEGO parts.

Homemade hydrogen student car

Every year, Shell organizes special races for alternative fuel vehicles. And in 2012, this competition was won by a car created by a group of students from Aston University in Birmingham.
The students built a car out of plywood and cardboard that is powered by a hydrogen engine that produces water vapor instead of exhaust gases.

Homemade Rolls Royce Phantom from Kazakhstan

A separate area of ​​\u200b\u200bcreating home-made cars is the construction of cheap copies of expensive and famous machines. For example, 24-year-old Kazakh engineer Ruslan Mukanov built a visual copy of the legendary Rolls Royce Phantom limousine.

While prices for a real Rolls Royce Phantom start at half a million euros, Mukanov managed to build his own car for just three thousand. At the same time, his car is visually almost indistinguishable from the original car.
True, this car looks very unusual on the streets of the provincial Kazakh Shakhtinsk.

Upside Down Camaro - car upside down

Most of the creators of homemade cars are driven by the desire to improve the visual and technical component of mass-produced cars. American racing driver and engineer SpeedyCop started from opposite principles. He wanted to degrade the appearance of his car, turning it into something unimaginably funny. This is how the car called the Upside Down Camaro was born.

Upside Down Camaro is chevrolet camaro 1999 with body turned upside down. The car was created for the parody race 24 Hours of LeMons (24 Hours of LeMons), in which only cars worth no more than 500 US dollars can take part.

There is no limit to perfection. This saying is well known to everyone and everyone. And any car owner strives to make perfection out of his car. For many drivers, factory settings are not enough. They want to bring something of their own. Something that will set them apart from the rest. But what if what you want is not available in the store? There is only one way out: you can not buy - do it yourself.

They have become very popular lately. They improve the appearance of the car, change some specifications or bring nice additions to the options. Among the variety of possible alterations, we propose to consider several options.

car wash

Let's start with perhaps appearance. When the car is clean, it paintwork glitters and sparkles. It's nice to see this kind of technology. Immediately there is a feeling that the owner is watching his car. But going to the car wash is not always possible for various reasons. In such cases, homemade products for the car will come to the rescue. With your own hands, you can assemble a small sink, which can be used at any convenient time.

To make a sink, you will need the following parts:

• canister with two plums;
• hose 2 m long (suitable for connecting a washing machine);
• watering gun with telescopic rod;
• Union;
• spool;
• rubber gasket (outer diameter 2.4 cm, inner diameter 1.5 cm);
• coupling.

And now let's get started:

1. We make a hole in the lid of the canister. We smear the “spool” with sealant and insert it into the prepared hole in the cover. Let's dry.
2. In the second cover we make a small hole. It is necessary for the junction of the cover and the coupling is treated with sealant and also allowed to dry.
3. From the curved end of the inlet hose, cut off the nut with the fastener. Mounting is no longer needed. We apply sealant to the nut and fasten it with reverse side couplings. We connect the hose with the cut side to the nut of the quick-release fitting. Next, the main fitting is twisted, which is also connected to the watering gun.
4. On the other side of the hose, insert the rubber gasket into the nut. This will protect the system from air ingress. After that, the nut is screwed onto the quick-release fitting.

This completes the process of making a homemade car for a car with your own hands.

Seat upholstery

Homemade products can also be useful to update the interior. Useful accessories and crafts for cars allow you to replace worn parts, add interior lighting and much more. Consider the option of how to upgrade the seats.

This will require fabric. You can choose two colors - for the central part of the seats, the back of the back will fit beige leather (it will take about 4 m), and everything else will be black. Black leather needs about 3.5 m. The entire fabric needs to be duplicated (glued) with a layer of foam rubber 0.5 cm. Foam rubber is glued with interlining using an iron. This will make it easier to work with him.

From the removed seats (it’s more convenient), we remove the covers. We number their individual parts. In order not to get confused, we transfer everything to paper. Also on paper, you need to mark the places where the knitting needles are attached (they are on the back of the covers). The spokes themselves will then be inserted into new covers.

Next, we disassemble the skin into separate parts (we dissolve the seams). Patterns are obtained necessary elements. We lay them out on the wrong side of the fabric (wrong side up, so that the mirror image of the details does not work out) on thick paper (it is possible on wallpaper) and circle around the perimeter. Leave a 1 cm allowance around the edges for seams. Then all patterns are cut and sewn (starting from the center). On the reverse side of any fabric we make pockets where the knitting needles are inserted.

Having connected all the details, we get new covers. We do this process in turn for all the seats. Having made such interesting and useful homemade products for a car with your own hands, you can update the interior without contacting a service.

Ceiling renovation

You can also replace the lining on the ceiling with your own hands. Homemade for the car in this case, you must start by removing the ceiling. This can take quite a lot of time. Fastening in each case individually. There is nothing complicated, the main thing is to carefully examine everything and check that all the details remain intact.

When the ceiling panel is removed, the old fabric is removed from it. When preparing material for the ceiling, you need to remember one important point: on the wrong side it should have a small layer of foam rubber. The fabric is glued with heat-resistant glue. When the glue dries, the panel can be installed back on the ceiling. Do it in reverse order.

"Angel Eyes"

It is quite possible to collect electronic useful homemade products for cars with your own hands. For example, "angel eyes" will update the headlights of any car. To make them you will need:

• plastic transparent sticks (can be from blinds);
• resistors (220 Ohm);
• battery (9 V);
• LEDs (3.5 V).

The process looks like this:

1. On any metal can, the same diameter as the headlights, we wind a ring of plastic sticks with pliers. To do this, it is slightly heated.
2. Next, connect a pair of LED and resistor. Their performance is checked with a battery.
3. Another LED is connected to it.
4. On a frozen ring made of plastic sticks, we make deep cuts.
5. We collect the ring, attach the LEDs, connect.

Conclusion

Do-it-yourself homemade products for a car can be assembled by everyone. The main thing is to be confident in your abilities. A little information from our article, a little bit of our reasoning and thoughts, and everything will work out. And the car will only get better. And it's doubly nice that it's handmade.

If you think that homemade products are for kids and bored housewives, we will dispel your misconceptions very quickly. This section is completely devoted to the manufacture of homemade products from car parts and rubber tires. Almost anything can be made from car tires. From garden shoes to a full-fledged playground with swings, fairy-tale characters and elements for relaxation. Finally, ever-busy dads will have the opportunity to show their creative talents and create something useful and beautiful in their own backyard or house yard.

It is common for automobile tires to become unusable, especially given the domestic quality of roads and sudden changes in temperature. Instead of sending an old tire to a landfill, it can be slightly transformed and donated new life on the playground, in the garden or garden.