Refinement of liftback grants with your own hands. With your own hands: finalization of Lada Grant and Kalina

Autotuning has recently become widespread. Modernization plunges not only old, but also new cars. The Lada Granta liftback is no exception. The main goals pursued by car owners are to increase power, improve handling, change the exterior and interior.

Tuning "Lada-Granta" do-it-yourself liftback

"Lada-Granta" in the back of a liftback, although it is modern car, which is offered in a large number of trim levels, but many owners still try to change and refine something in it, making the car different from the standard. Various options tuning allows you to make changes both to the car as a whole and to its individual systems and components. It is worth dwelling on such improvements in more detail.

Engine

Almost every owner would like to drive a more powerful and dynamic car. The weakest version of the Lada Grant liftback develops only 87 hp, and the most powerful version of the engine has a power of 106 hp, which is also unable to provide decent car dynamics. You can make the power unit more frisky without serious intervention in the design of the unit in the following way:

In addition to the listed engine upgrade options, you can install electronic pedal gas. This element will provide the most accurate response. power unit by pressing the pedal. New versions of such elements have an additional module that allows the driver to select the desired driving mode.

With a more serious approach to modernizing the Lada Grant engine in the liftback body, you can install a turbocharger, forged pistons and bore the cylinders. If you listen to the recommendations of experts, then such improvements must be carried out comprehensively, since equipping a car with only a turbine can damage the pistons as a result of increased load. Also, if you put only forged elements, then there will be no increase in power.

Chassis

In addition to engine improvements, modernization can also be chassis machines (suspensions, levers, etc.). The model in question has a soft suspension, designed for driving on good roads. Any changes to the suspension can make it stiffer, which will have a positive effect on handling, but at the same time, comfort will decrease. Changes can be made to the rear suspension by reducing the number of spring coils by exactly one. To give the body rigidity when cornering, you can install strut extensions on the front end, the same as on Kalina.

To lower the Grants liftback suspension, you can choose one of the following methods:

• replacement of the suspension for a design with a variable ground clearance. Thus, the shock absorbers are given autonomous rigidity. In the summer, the car can be lowered, and in the winter it can be raised;
• replacement standard suspension to a new one with a lower landing. In this case, an appropriate set of springs and shock absorbers is selected;
• installation of low profile tires. This option allows you to reduce the landing and improve the handling of the car;
• equipping a car with lowered springs without replacing depreciation elements. This option will only be suitable for city driving.

In addition to the above improvements, you can make the following changes to the suspension:

If we consider changes brake system, then the simplest tuning option is to replace the standard brake discs with products of a larger dimension. In this case, when installing R14 disks instead of regular R13, no alterations are required.

Together with the discs, you can install foreign-brand brake pads. The discs on the Lada Granta liftback can be supplied, for example, by Brembo (article: 09.8903.75), and the pads - by Fiat (article: 13.0460–2813.2).

Video: lowering the landing on the example of "Grants" in a sedan

Appearance

Exterior tuning is quite diverse and depends only on the imagination and financial capabilities of the car owner. To change the appearance, you can install or replace the following elements:

• roof rails. These products are to some extent capable of correcting some errors in the control system. They differ both in weight and in the degree of aerodynamics. The installation of such elements gives the machine an individual character;
• Luke. Such an addition can not only improve the design of the car, but also increase the comfort in the cabin in hot weather;
• spoiler. This element is one of the main ones in external tuning, as it allows you to stabilize the car at high speeds. The color scheme and shape can be selected as desired after taking measurements from the machine;
• analog mirrors. In the Lada Grant standard, the liftback is equipped with manual mirrors. Instead, you can put elements from Kalina, which are configured electronically. If there is no desire to change mirrors, then heating can be built into standard devices;
• disks. Choice rims today it is quite diverse and can significantly transform a stock car. You can choose both cast and forged wheels of a suitable dimension;
• bumpers. Tuning these elements will add some emotional component to the appearance of the car. Most popular model front element is “I am a robot”, which perfectly replaces the standard product. It is also possible to install bumpers in specialized studios;
• radiator grille. You can buy a tuned part or modify it yourself. For this, an aluminum mesh is most often used, which improves protection against pollution;
• arch extensions. The pads not only protect the car body from dirt flying from under the wheels, but are also able to visually expand the car. The expanders are made of plastic and are fixed to the body with double-sided tape;
• door sills. The main function of these products is to protect thresholds from impacts and maintain paintwork. During the impact, the plastic takes it upon itself and in worst case will simply break, but the threshold itself will remain intact.

Salon

A lot of attention is paid to interior tuning, since this is where the owner and passengers spend most of their time.

Steering wheel cover

One of the first interior elements to be changed is steering wheel. Some owners change it to a sporty one with a smaller diameter. However, it should be borne in mind that driving a car becomes not very comfortable. Therefore, this option for upgrading the steering wheel is for an amateur. In addition, the steering wheel can be wrapped in leather for an attractive look, but for a quality result you will have to visit specialized service. You can resort to more simple option- installation of the finished cover. The product is quite simply mounted, pulled together with threads, and, if necessary, removed without any problems. When choosing a cover, one should take into account the overall design of the Lada Granta liftback cabin.

Armrest

Another element of the interior that can be improved in the tuning process is the armrest. The choice of this part today is quite diverse, but since such products are mainly made in China, the most negative impressions can arise from the operation of such a product. The fact is that the body of the armrests is made of plastic, which cracks under the influence of the sun. The fastening of the part also leaves much to be desired. When opening and closing, a creak appears, the objects inside ring quite strongly, which also does not give any pleasure. Despite the many shortcomings, the Chinese armrests, if desired, can be modified by eliminating the negative points. To do this, the interior space is lined with dense foam rubber, and the outside of the product is sheathed with any finishing material (fabric, leather, alcantara, etc.).

Backlight

Interior lighting "Grants" liftback looks rather weak. There are several ways to improve the situation, but the most common is the installation of LED elements. To do this, the regular interior ceiling is dismantled and the diffuser is removed. For illumination, they purchase an LED strip for 18 elements, divide it into 3 equal parts and mount it on double-sided tape to the inside of the ceiling. Power is supplied to the tape from the wires led to the ceiling, taking into account the polarity.

Torpedo and dashboard

One of the interior elements that sets the overall aesthetics of the interior is dashboard. Initially, this detail is made in shades of gray, which clearly does not add beauty to the interior. If desired, the panel can be modified to make it more attractive. Of the tools and materials you will need the following list:

• dye;
• primer for plastic;
• solvent;
• acrylic lacquer;
• compressor.

To repaint individual elements of the tidy, they will need to be dismantled, cleaned and degreased. After the preparatory measures, the primer is applied, and then the products are left to dry. When the material is completely dry, start applying paint with a compressor. For the purposes under consideration, you can also use a paint brush, but the quality of the coating will leave the best. The best option- buy paint in an aerosol. Apply the paint material carefully so that smudges do not appear. After the paint has dried, the parts are covered with acrylic varnish and left to dry, then they are assembled. The torpedo itself, if desired, can be dragged with modern materials, for example, alcantara, carbon film, etc.

The Grants tidy in the liftback body is equipped with LEDs, but in terms of their light output they cannot be compared with foreign cars. To increase the brightness, standard LEDs are replaced with more powerful ones, the choice of which is quite diverse today. Such changes will make the panel brighter, which will positively affect the attractiveness of the interior and the mood of the owner.

Noise isolation

To increase the level of comfort, some motorists carry out additional soundproofing of their car, since regular processing is not enough. For a quality fight against extraneous noise, it is necessary to perform a comprehensive soundproofing of the cabin, i.e., process the doors, floor, engine shield, ceiling with special vibration and sound-absorbing materials. The first include Vibroplast, Vizomat, Bimast, and the second - Isoton, Accent.

For processing, it is necessary to completely disassemble the interior, that is, remove the seats, dashboard, trim and apply a layer of vibration isolation on bare metal, and sound-absorbing material on top of it. After coating the metal, the interior is assembled back.

Video: soundproofing "Grants" liftback

Additionally, you can cover the bottom of the car from the outside with bituminous mastic, reducing the level external noise while protecting the metal from corrosion.

Additional upgrade

Salon "Grants" liftback can also be improved by replacing the headlining, door linings and flooring. This process, as well as car tuning in general, involves considerable financial investments. For such a modernization, it will be necessary to dismantle the elements that are planned to be modified, and then drag them with any modern material.

As for the seats, they can also be re-upholstered with a change in the design of the frame, for example, with sharpening for sports. But this requires not only appropriate materials, but also knowledge. An easier option is to purchase covers, the choice of which today is able to satisfy almost every car owner.

If the chairs for one reason or another have become unusable, then a complete restoration or replacement is indispensable. To increase comfort rear passengers, head restraints can be installed in the back of the seats, with which some Grants liftback models are not equipped. To do this, they purchase the head restraints themselves, fastening to them, dismantle the rear seatback, drill the necessary holes and carry out installation.

rear shelf

Improvements to the rear shelf may be required in several cases:

• speaker installation;
• elimination of "crickets";
• finishing.

In the first case, the shelf must be dismantled, holes made according to the size of the dynamic heads and fixed.

To eliminate squeaks, Madeleine is used, which is glued along the perimeter of the fit of the shelf to the plastic side elements.

As for the finish, Carpet is most often used for the rear shelf. If you wish, you can fit it with any material by analogy with other elements of the cabin.

Trunk

One of the disadvantages of the luggage compartment is that during periodic loading, the mat is pressed into the spare wheel niche, and in the absence of the latter, it completely falls into it. To improve the situation, car owners modernize the trunk by installing a hard bottom made of plywood, followed by sheathing with leatherette or other materials.

Lighting system

Automotive optics is not complete without tuning. The easiest option is to install cilia on the headlights.

Cilia are a plastic part that is mounted on the top or bottom of the headlight.

Eyelashes are mounted on a special sealant or double-sided tape. Even installing such a simple element allows you to transform a car, making it more attractive. Improvements to the lighting system also include the installation fog lights, since they are absent in the basic configuration of the car in question. Under the fog lights in the front bumper there are holes covered from the factory with plastic plugs. Installing additional optics will not be superfluous at all, since it improves the illumination of the roadside and the road section directly in front of the car. Installation of fog lights is quite simple and almost every motorist can handle it.

If the installation of cilia and additional headlights seems insufficient to you, you can completely change the head optics. In this case regular lighting dismantled, and xenon or bi-xenon lenses are introduced instead. Such equipment in the kit has an auto-corrector of headlights and washers. Adjustment work is best done on special stands. Xenon lighting will allow you to replace only the dipped beam, and bi-xenon - near and far. The advantage of installing such equipment is a better ability to illuminate the road at night and in wet weather.

Such a move will solve the problem on all thermostats, with the exception of Luzar products.

Refinement of the reversing lamp

Standard Lamps reversing do not satisfy the needs of many Lada Grant owners. They are especially difficult to see in bad weather conditions, for example, during a powerful snowstorm or in fog. Therefore, it is also necessary to look for a solution here. The best way out of the situation would be to install a xenon lamp. Lighting devices of this kind are not new for foreign cars, even in the “standard” configuration, but AvtoVAZ has not yet come to this. Therefore, you will have to modify the car on your own. Let's analyze the installation and connection for H1 xenons at 5000 K with an ignition unit. Installation is carried out as follows:

1. We dismantle the old lighting fixture.
2. Installing a new lamp.
3. We connect standard wires to the ignition unit, from which the xenon lamp is powered.

That, in fact, is all. A small investment of time and basic knowledge of the Lada Granta electrical circuit will help you achieve a bright cold light that will be noticeable in any light. Now you can safely take back both at night and in fog or in a snowstorm.

Domestic manufacturers have never taken into account the wishes of motorists when designing and manufacturing cars, guided only by instructions from the country's leadership and the relevant ministry. But the market economy has made its own adjustments and now the company's management is actively using the experience of VAZ car owners in their work and is trying to introduce constructive proposals coming from them into production. For example, the management of the company promised to take into account the huge number of wishes expressed for improving the design of models and the Grant, expressed by the owners of these cars, in the near future. And what about those who have already purchased a car and face its shortcomings every day? Eliminate them yourself. Moreover, many of them will not be difficult to fix with your own hands. So, how can you improve your imperfect car?

The main problem that VAZ car owners face is the lack of money for high-quality “pumping” of their car. Most car owners prefer to put up with them, but there are restless mechanics who make the necessary changes to their iron horse with their own hands, saving money and gaining invaluable experience in repairing their own car. We present to your attention an approximate work plan for self-tuning car Lada Granta.

Tips on how to start tuning Lada Granta with your own hands and where to start finalizing a car.

1. Carefully inspect the pipes of the fuel supply system and the clutch cable. If there is direct contact between them, they must be isolated from each other. After that, pay attention to the steam outlet and corrugated fuel pipes.

Interesting do-it-yourself tuning work is given in the article step-by-step instruction!

2. At the location of the washer reservoir windshield a piece of protective tape must be glued to the body, which will protect the body of the tank from wiping during operation.

3. Check the position of the harness located next to the level sensor brake fluid. This can be done by slightly turning the tank cap so that the battery does not touch the motor shield. If it becomes necessary to replace the harness, then after that you need to check the brake fluid level.

4. Inspect the wires of the ignition system, which are marked 2190-3724026. In case of damage to the insulation, insulate the damaged areas with 15-20 layers of electrical tape.

5. Check diagnostic harness oxygen sensor. The manufacturer tries to minimize the sagging of the wires, as a result of which their mechanical damage may occur. To prevent damage in the future, it is necessary to reduce the tension of the wires by pulling them out of the passenger compartment a little.

6. In conclusion, you need to check everything brake pipes vehicle, as they may be damaged due to being too close to each other. To breed them a little to the sides, you can use a regular screwdriver.

All these simple "improvements" will eliminate some of the factory defects of the car and prevent the occurrence of serious malfunctions, the causes of which they can become.

Automobile Lada Granta is one of the most modernized among the domestic auto industry. If you are interested this car, you will find all the details regarding tuning Lada Granta with photos in this article.

Engine tuning Lada Granta

The produced model of Lada Granta, have standard average engine settings, that is, performance can be increased by tuning chip tuning, which, if done correctly, can give an increase in car power by 30%. The engine parameters are increased without mechanical changes, but only by reconfiguring the microcircuit, which is located in the electronic unit. After reconfiguring, the driver will be able to control the ignition, speed, air flow and, most importantly, fuel supply. There are two ways to reconfigure chip tuning. In the first case, you need to remove the electronic unit and remove the chip to further change the parameters, but you can also connect directly to the chip tuning using a special connector. At first, excessive fuel consumption may occur, but only due to the inept use of the new power of the car. In fact, fuel consumption is reduced by 2 times, as well as engine wear is reduced, and the performance of the car in power and speed will increase. The work is carried out in a large number of workshops, where there are necessary programs for reconfiguring chip tuning.

Basics of mechanical tuning

Lada grant, which comes off the assembly line, manufacturers have flaws and these little things can already be replaced after the first run-in of the car. The accelerator pedal responds poorly, the traction on the bottoms behaves indirectly, the car itself goes into a powerful mode only after the driver pushes the pedal all the way down. Drivers want to get output power sooner. Power drops significantly even after turning on the air conditioner. This problem is solved after minor changes at a high degree of forcing the engine. Changes are made to the intake-exhaust elements, the parts of the ShPG are replaced, the camshaft is reconfigured and the engine displacement is significantly increased. In the workshop, first of all, the engine controller is reconfigured, which corrects the industrial initial firmware of the car. Tuning allows you to reduce fuel consumption, increase efficiency and power given to the car in the initial stages, as well as improve torque.

Grant injector tuning

In fact, due to the novelty of the machine, tuning on the Grant model kinjector is problematic and often does not make sense on an unrolled machine. The only thing that can be done is to improve injection system, by removing the spring from the vacuum actuator on the primary throttle chamber. After that, you can see a significant improvement in the field of vehicle dynamics, but fuel consumption also slightly increases. It is also possible to increase the directed volume of heated air to a stable point by replacing the standard hose with a similar hose, only longer.

Tuning chassis Grant

Lada in a new guise has acquired a soft suspension system, which was created, in particular, for people who love a comfortable ride, and this really becomes noticeable compared to previous models. Any tuning of the chassis and suspension can make the food stiffer, which improves handling, but at the same time a margin of comfort is lost. Changes can be made better by yourself by reducing the coils of the springs by rear suspension car. Buying new springs does not make sense, as they will just lead to the fact that the suspension will become stiff and uncomfortable. To give a little stiffness, the springs are cut equally one turn on the two rear springs. Stretch struts, which can also be installed on the A-pillars, can stretch the body a bit, while giving torsional rigidity to the body. On sharp turns such a change can give easy control at high speed, without throwing the body to the side. Stretching racks can be borrowed from the Lada Kalina model. In addition to the standard chassis settings, levers, suspension and shock absorbers can be changed, which at the very beginning, even before the rollback, are replaced with a similar option for the Lada Grant. To lower the suspension of the car, you can use several methods.

• This is a replacement of the standard suspension with a suspension with adjustable clearance, which gives autonomous rigidity to the shock absorbers. In summer, the car can be lowered and raised in winter without any problems.
• The cheapest and most reasonable option is to replace the standard suspension with a new, low-slung one, which consists of a set of new springs and shock absorbers.
• Tires, or rather, their replacement with low-profile tires, allows you to lower the suspension, the car and improve handling without compromising comfort, with the correct compatibility of rubber and disk base.
• You can cut the coils on all the springs of the Lada Grant, while leaving the native shock absorbers, but this will lead to a low suspension, but further problems both in the operation and durability of the chassis, and in a comfortable ride.
• Lowered springs are often used, also without changing the shock absorber base, which can only be used with high quality for frequent driving in an urban environment, but not off-road.

External tuning Lada Grant

Lada Granta had not yet managed to gain a foothold in the domestic automotive markets, as they immediately began to modify it, and this directly affected the outer side of the car most of all. Tuning the outside of the model is completed in several directions.

• The railing part of the exterior trim improvement varies both in weight and in the degree of aerodynamics, which in some cases can even correct small distortions in the control system. Thanks to such a detail, the car receives a design distinguishing feature.
• LED upgrades, which fit almost any brand of car, are installed by yourself or in any workshop.
• The sunroof has become the most important element of the Lada Grant in the summer. Manufacturers did not think of this element for the car model, and drivers have to do everything themselves, but such an addition not only improves the design of the car, but also adds comfort in the cabin in stuffy weather.
• Spoiler refers to one of the main elements external tuning, in addition, it also performs an aerodynamic purpose, to stabilize the car at high speed. The color and shape of the spoiler are made to order, after measuring and reading the color from the base of the car body.
• In, the configuration for the Lada Granta comes with standard mirrors with manual adjustment, which causes a lot of problems. They can be replaced by analog ones from Lada Kalina, which are electronically adjusted, while also having a heating function, which is especially useful in case of condensation, rain or strong temperature changes. They are slightly inferior in size to the standard Grand mirrors, but in reality it is almost imperceptible. If mirror electronics are not needed, then you can use standard side mirrors install heating in the inner part of the housing without replacing it.
• In, the standard equipment of the car, alas, does not include molding, which can diversify the appearance in an original way. The cost of such an improvement is acceptable, the work can be carried out independently. To fasten new moldings, you just need to order this part on two sides of the body, take a degreaser and double-sided tape for fastening. To perfectly match the body color, the moldings are made to order.
• Changing the washer fluid supply system is included in the tuning of the exterior of the car, but at the same time it can solve the problem of fluid supply delay, which affects windscreen wipers that work in dry mode at first.
• Negative changes to the body design include numerous vinyl decals, which are in a shattered picture with the entire styling of the car, and often cause more chuckles.

Headlights on Lada Granta

The standard equipment of the headlights on the Lada Grant has ordinary incandescent lamps, which do not differ in strong brightness, that is, they have a dim yellow light with a blurred glow area. They can be replaced by an assembly with LED baseless lamps that have a large and multifaceted glow area, with an increase in power, respectively.

There is an option with the modernization of conventional headlights, and their transformation into xenon headlights, using lenses. They are popularly called "angel eyes" because they give a very clear, not blurry, projection of light both at a long distance and at a short distance.

Parking at night becomes a big problem, as the standard car package includes only one bulb for the rear lights, which causes discomfort when parking due to dim vision. The problem is solved by replacing the light bulb with xenon with a brighter close and bluish color. To do this, you need a typical xenon lamp of the H1 5000K series, manufactured by different companies.

Tuning, especially the taillights, can be done by tinting, which so far does not contradict the law. The work of tinting the taillights does not differ from the tinting of ordinary windows and can be done manually. At the same time, it is not necessary to remove the headlights, but just using a hair dryer is enough to create a vacuum between the headlight and the tinted film.

bumper tuning

A discreet bumper from the creators of Lada Grant attracts few people, but, since this model was published quite a long time ago, you can already find a lot of details on it, namely a bumper for decoration. The first thing that comes to mind is the common “I am a robot” bumper, which fits perfectly on the fasteners of this model, but the price of the front and rear bumper is high, as is the shipping.

It will be much more profitable to pay attention to tuning with an STM bumper. It immediately catches the eye not only because of its uniqueness, but also the solution to many driver problems. This also applies to the cooling of the brake system, which is improved due to the protrusion that captures more air flow. Additional thresholds create a large volume for the front bumper, protecting it from dirt and chips falling into the grille. The connectors for the fog lights and the air collector also look original.

The bumper called "Sniper" is valued for its unique configuration and compatibility in one and sharpness and power. Trapezoidal cutouts for the air intake make the car lively and unpredictable, but they also serve as an additional cooling for the engine and front brake system.

The GTS kit has a large airbox that features sharp lines. Even more sharpness adds a connector for fog lights, which looks great in a one-piece configuration. Like the rest of the kits, tuning the GTS allows not only to improve the cooling of the front brake system, but also to improve aerodynamics.

Rear bumpers, in almost all sets they have the same features, namely aerodynamics, and even, smooth cutouts for the cable and state. car numbers.

Radiator mesh

The radiator mesh of the Lada Grant does not fully protect the car engine, especially in the summer, from bullets, fluff and insects, which, although not to a large extent, penetrate both into the engine compartment and simply get stuck on the radiator, which looks rather unaesthetically. The problem can be solved by tuning, but many decide to do it themselves. It is possible to bleed the radiator on your own, using an aluminum mesh, and its subsequent installation between the first and second sheet of the radiator, giving improved protection against dirt. The cost of such work is reduced to a minimum and everything can be done with your own hands by securing the mesh with glue or fasteners.

Front panel tuning Lada Granta

Lada Granta, in principle, like any other car model, comes in different trim levels. If the front panel of a luxury car class looks catchy, unique and immediately remembered for its originality, then in the usual class, the front panel is more annoying than attractive. You can change the design by tuning the front torpedo, and with your own hands. Work should be carried out in a well-ventilated area and preferably with a temperature without fluctuations. In turn (primer, paint and varnish), 2-3 layers are applied, to fix the effect is needed. Between the application of layers, a distance in time of no more than 5-10 minutes should be observed. Upon completion of the work, you can see how the torpedo is transformed, and in one moment it becomes bold and just another. You can paint the panel torpedo, completely or experiment and make your own drawing. The color for painting is often chosen as a standard, namely metallic, which looks great with a standardized panel in black.

Trunk tuning

What the manufacturers of Lada Grant forgot to do is a comfortable trunk, which you have to modify on your own, but, fortunately, this can take no more than half a minute. The first thing you need to pay attention to is the difficulty in opening the trunk, which manifests itself when using standard torsion bars, even where there is electronic system located in the cabin. In order for the trunk to immediately jump into its open position, you will need to install two springs from the fork installed on the VAZ 2101 clutch. brake pads. Springs can, in extreme cases, be replaced with a gas stop.

You can also improve the lighting in the luggage compartment, which is clearly not enough on dark nights to find the right item. The most common way to improve the glow is to replace standard lamps with LEDs, but even though the light becomes larger, it cannot penetrate all the right places. Salvation in this case is the LED strip, which is best done along the perimeter near the upper walls.

Tuning salon Lada Granta

As a rule, interior tuning always starts with the steering wheel, and this is not easy, because this is the main thing in the hands of the driver in the literal sense. The steering wheel can be easily modified by buying a new steering wheel in the desired configuration or by doing everything manually. Skinning the steering wheel is usually not such an easy job, especially if you want to change not only the rim, but also the spokes. You can do everything yourself, but you need to remember that you have to remove the pattern from the steering wheel for the correct measurement, and only then adapt yourself to sew up the skin on the steering wheel. For the first time, a ready-made kit that is easy to install is suitable. You do not need to sew anything, as the cover is tightened with threads and is also easily dismantled from its place.

Tuning the armrests of the Lada Grants can be a disaster if you do not take into account their features. Now the market is simply overflowing with Chinese products, and in our case, armrests. They differ in universal, but rather fragile fastenings. Plastic, maybe, after a while under direct sunlight, crack, and the constant strumming of objects inside the armrest is annoying. The last two problems can be solved by wrapping the part on top with a leather fabric, and adding a little soft material inside. You can also use just standard armrests from Lada Priora, but in this case you will need to make home-made mounts that will be fastened with self-tapping screws.

Plafonds often do not suit the owners of the Grants, because they are dim, illuminate the interior and only interfere. In order to make tuning towards the ceiling, you need to choose one of the methods. The first implies complete replacement ceiling, and here the choice may fall on a model like Lada Kalina, which is already distinguished by its clarity and brightness of lighting. The second method is a little more difficult, but not worse in result. We are talking about replacing lamps with LEDs, but they usually do not give a very strong increase in light, so they are often issued in addition to LED modules ELF 5SMD or similar.

You can radically change the interior only if you completely redo the entire skin, but because of the price and complexity of the work, few people decide on such a thing. The best option there will be a purchase of covers, especially since the choice on the market will please any driver.

Model covers are distinguished by their clarity, due to the fact that the dimensions are taken according to the pattern. As it became clear, the fabric is made to order for a specific model in many studios, which take into account not only the shape and size of the seats, but also additional factors, such as armrests or reclining the back of the chair. Such covers are not assembled on the seat and fit snugly to it.

Universal seat covers are famous for their price and variety on the market. automotive market. Elastic fabrics often stand for the material, for fitting chairs, but, as a rule, the shapes do not match, and even the elasticity of the fabrics does not help. The constant problems of the cover with picking up are covered only by its durability.

Fur covers, as well as universal ones, can be used on models different type, but they can serve as a good help in creating comfort. The fur is of excellent quality, namely, it does not allow the seat to sweat in summer and freeze in winter. When choosing fur cases, the main thing is to pay attention to the quality of the fur.

Leather cases can be classified as model range, because of their price and a poor assortment on the market. They have a large mass negative qualities, in terms of comfort both in winter and summer, but the appearance of the car interior is perfectly transformed.

The latest type of covers for Lada Granta is made of a new material, eco-leather, which completely repeats the appearance, natural leather, but in addition to this, it solves the problem of air transmission. The air passage of eco-leather is 10 times higher than that of real leather, but at the same time it prevents moisture from penetrating.

The final touch is the name of the improvement of the lighting system on the rear passenger seats. Tuning of the light base, based on the installation of two shades, on the sides of the rear window pillars. You can install them yourself, the main thing is to find the correct distance between the passengers and the center of light, to prevent discomfort. Additional light sources, as a rule, can be placed in door handles. This will require no more than two diode lamps, with a board in the form of a square for 4 diodes. The base is removed from the lamps and installed in place of the plugs in the handles. The plugs can be replaced with carved parts from the diffuser of the ceiling, for a clearer lighting effect or, conversely, to focus on a specific point.

Tuning door panels

Door panels are often tuned, but there are different ways. The first and most common is the fitting of panels with leather or leatherette, but at the same time, the work is rather overhead in the form of flexible and curved shapes, on which it is problematic to install the skin. In addition, after a while, such a leather finish will make itself felt from the bad side, or rather, the material will begin to lag behind the panels due to temperature changes, the same shape, moisture ingress and constant contact with the panels. Problems can be solved by sawing out a podium from chipboard, on which the material will be installed in the future, but workpieces must be made with extreme accuracy so that there are no incidents regarding the holes for the handles and the power window panel.

rear shelf

Tuning the rear shelves, between Lada models, is very similar to each other due to the fact that the drain often serves as a demarcation for the luggage compartment, thereby making it more voluminous and convenient in some cases. If luggage compartment necessary for the transportation of large loads, it is advisable not to change anything, in other cases, the free space can be used for an acoustic installation, which is covered with leather material over a padding polyester. It is especially beautiful to look when the interior design is completely made to match the style of leatherette or natural analog material.

Tuning electricians

Electrics on the Lada Grant, like on any other domestic car, can be called an unfinished element. So, for example, power windows, unlike foreign cars, become incapacitated already 10 seconds after the ignition is turned off, but this is easy to fix. From mounting block, you need to remove the K2 relay, which is responsible for this process, and install a jumper between contacts 30 and 87, for the power windows to work in any mode of the machine.

It is no secret for Grant owners that an electrician controls the gas pedal in the car, but not everyone likes her behavior, namely lethargy on the road, poor dynamism or failures. If only one person drives a car, then everything can be solved by flashing the computer to add agility to the gas pedal. If there is more than one driver behind the wheel, then for comfortable driving it is recommended to install a gas pedal booster, or as it is also called Jetter. This device forms a relationship between the position of the gas pedal, and throttle valve, which often does not keep up with pedaling, but after tuning, it dynamically responds to the first touches of the pedal, adding power and sharpness to it.

Do-it-yourself tuning Grants is a rather controversial topic among both specialists and amateurs. On the one hand, the car is great for everyday use, and trying to improve something in it means to “hook” other elements as well. On the other hand, everyone wants to upgrade their car, despite the possible difficulties and costs.

1

Tuning Lada Granta Sport, as a rule, implies an increase in power and an increase in the torque of a car engine. In this case, the owner of the domestic model should polish the receiver channels. Why do it? The internal design of the intake manifold of VAZ vehicles has several defects. In addition, there are “steps” at the junction of the manifold and receiver, as well as at the junction of the cylinder head and manifold. Plus, the inner surface of the receiver channels itself is far from ideal - it is rough and not quite even. Together, these defects prevent the full filling of the cylinders, which, in turn, reduces the power of the machine.

Self-grinding channels

With complex tuning of the top of the Grant Sport engine, both intake and exhaust channels need to be finalized. With the release channels, the situation is a little simpler - the refinement of the cylinder head, which we will discuss below, is quite enough. To upgrade the intake channels, you will need to do - buy and install a once-through system of increased diameter. But since such a design is quite expensive, this part of the tuning is usually skipped. There are many methods for finalizing the cylinder head. We will consider the most popular, which is easy to do yourself. First of all, it will be necessary to refine the channels - increase their diameter and grind. For this you will need:

• sandpaper;
• drill;
• cutter set;
• flat screwdriver;
• set of keys.

First, we disassemble the cylinder head. To do this, we separate the manifolds, turn off the receiver from the intake element and disassemble it into parts. After we begin the long process of grinding the channels. The easiest method is to insert a small piece of tube into the drill chuck, glue a piece of sandpaper to the tube and grind. In the course of work, the paper must be replaced with a fine-grained product. Tuning the top of the Lada Grant engine also requires the combination of the cylinder head and the manifold. To do this, it is necessary to lubricate the butt part of the collector with a thick layer of grease and attach the cylinder head to it.

After that, remove the element and inspect the print. Ideally, the place where the channels overlap should be without "steps", and, of course, they will be on the print. Then we put marks in the places of overlap and continue grinding until we get the maximum match. After that, apply a new gasket to the sanded surface. You will see that the edges of the channels also serve as a kind of "steps", that is, interference. They need to be sanded so that they fit perfectly into the holes in the cylinder head. After that, remove the gasket and connect the cylinder head to the manifold.

2

After we have increased the amount of air entering the cylinders, it's time to take care of the quality of the latter. Many drivers think about installing protection only after installing a zero filter. However, with the help of protection, you can also tune cars with factory filters. Filter protection not only prevents dust from entering the car engine. The product also protects the filter from overheating. To make a "screen" you will need:

• a small piece of tin;
• screwdriver or drill;
• bolts and nuts;
• scissors for metal.

Filters on Lada

First you need to cut out the template of the future "screen". To do this, we apply a piece of tin to the filter and cut the sheet so that on the one hand it protects the filter from dirt, and on the other from the heat of the motor. Then you need to cut out the mount for protection, 3 strips of the appropriate length will do. After that, we start assembling. We drill 6 holes in the "screen". We put fasteners on top, fixing them with nuts or bolts. We bend the ends of the mounting strips so that they crawl under the filter clamp.

A filter tuned in this way will require less frequent maintenance. In addition, the life of the part will increase significantly, because it will not overheat under the influence of the motor.

3

Tuning Lada Granta sedan often involves changes in the interior of the car. To do this, you can go in several ways. The first method is to invest a large amount of money and time and completely redesign the cabin. The second way is to install several auxiliary devices in the panel and improve its lighting. The third method is to do it by investing in it to a minimum. As a rule, with this method, those details that are most "striking" to the driver and his passengers are finalized. One of these elements is the upper part of the instrument panel, that is, its visor.

Salon tuning

Among fans of VAZ tuning, it is generally accepted that hauling a visor is not an easy task. The element has a rather complex shape, which makes it almost impossible to make a “mask” for it without seams. Let's find out if that's really the case. At the beginning of work, you need to dismantle the visor of the instrument panel by unscrewing the 3 upper and 3 lower bolts for this. Then attach the trim material to the visor and remove the pattern. To do this, the product must be installed as evenly as possible on the visor, take into account all the bending lines and mark the places where the matter will be cut off. In the process of taking measurements, in no case should you forget about the buttons that are located on the sides of the visor. In these places, neat holes must be made in the material.

Next, we cut the material according to the measurements and begin to glue it to the visor. It is very important to use the adhesive carefully. Make sure that it does not drip onto the material and does not flow out from under it. Once you are done with pasting, you need to leave the visor for a day so that the material grabs onto the part. After that, we install the element in place in the cabin. If desired, you can pay attention to the illumination of the instrument panel. Over time, it becomes dimmer, so you will need to replace the regular backlight bulbs. For this, LEDs of white, blue or red are best suited. To work, you need 6 light bulbs, a resistor, 1 m of wiring and superglue.

Before replacing the bulbs, carefully remove all arrows and scales. After we disconnect the backlight power terminal from the car battery and unscrew the factory bulbs. We remove the regular light guide and clear the place behind it, prepare new lighting. Solder the wiring to the diodes. We twist the free ends of the wiring into one bundle and connect it to the resistor. After that, we connect the backlight to the battery terminal and check the operation. If one of the bulbs does not light up or blinks, then its wire must be stripped and connected again. If this does not help, then the light bulb is most likely defective.

At good work manufactured backlight its wires need to be pushed inside the dashboard. We connect to the battery and fasten the light bulbs with superglue. We wait about 2 hours, after which we put a diffuser from a piece of polystyrene. On top of it, we install factory scales and auto arrows. Be sure to check the correctness of the arrows. After installation, they should not be lower or higher than the "0" mark. By replacing the standard backlight bulbs, you will permanently get rid of the need to regularly change illuminators. The service life of diodes is several times longer than factory lights. Plus, they're much brighter.