The best oil for prado 150 diesel. Recommended engine oil for Toyota Land Cruiser Prado

Toyota Land The Cruiser Prado is a full-size SUV that is extremely reliable and durable, with a solid and proven design. This model considered the best-selling SUV in Russia among classmates. This is not surprising, given not only good driving performance and high reliability, but also the possibility of self-maintenance, despite the rather complex design. At the very least, we are talking about performing elementary repair procedures, such as changing engine oil. In fact, even an inexperienced owner of the Toyota Land Cruiser Prado will cope with this task, if you carefully read the user manual. As you know, the process of changing the oil is preceded by the choice of the oil itself. This procedure is more responsible, and requires little knowledge in the field of theory, including various parameters and standards. In this article, using the example of Toyota Land Cruiser Prado, we will consider in detail how to choose the right motor oil, as well as how much to fill it in, depending on the working volume of the internal combustion engine and the model year of the car.

Replacement frequency

It must be said right away that the official oil change regulations for Toyota Land Cruiser may not be relevant if the car is often operated in difficult climatic and road zones. For example, when driving only in the city, it is enough to pay attention to the regulations, which are about 15 thousand kilometers. But since we have an SUV in front of us, it is often used off-road. In this regard, a more frequent oil change may be required, since under the influence of negative factors, the liquid quickly loses its useful properties, and as a result becomes unusable. For example, experienced Russian owners who regularly subject their Land Cruiser to extreme loads prefer to change the oil every 7-10 thousand kilometers. When driving around the city, taking into account the variable climate, the frequency of replacement can be 10-12 thousand km.

How to determine the quality of the oil

To understand that the oil has become unusable and needs to be replaced, to do this, look at its color, and pay attention to the smell and composition of the liquid. So, if the oil is colored dark brown, and also has a specific smell of burning and contains foreign impurities (metal chips, mud deposits, soot, dust, etc.), in this case, an oil change can be immediately added to the list of the most urgent tasks for the near future.

When to Check Your Oil

There are several generally accepted signs, upon detection of which it will not be superfluous to check the condition of the lubricant:

Fuzzy gear shifting
The engine is running and is not able to develop maximum speed
Engine running at partial power
Increased fuel consumption
High level of vibrations and noises

Types of motor oils

There are only three types of lubricants on the market, which are the most popular among all the others:

Synthetic oil is the most demanded product among foreign cars, including all modern machines. This oil has good non-stick and extreme pressure properties and, due to its high fluidity, is quite stable at low temperatures. Thanks to this, synthetics can be recommended Toyota owners Land Cruiser Prado with low mileage, as well as for operation in harsh winter conditions - for example, in Siberia.
Mineral oil is the exact opposite of synthetic. In frosty weather, mineral water can quickly thicken, which is an advantage, and at the same time a disadvantage. The downside is that it instantly freezes, and the plus is the absence of oil leaks, which are prone to cars with high mileage. The absence of leaks is due to the excessive density of mineral oil, and as a result, it may not pass even through a microcrack in the body. Mineral water is more suitable for older cars, including Land Cruisers with high mileage.
Semi-synthetic - quite quality oil despite its significant shortcomings. It consists of 70% mineral and 30% synthetic oils. It is also used for cars with high mileage. The main advantages of semi-synthetics are that such an oil resists low temperatures a little better, and has a longer shelf life.
Based on the data obtained for each of the three motor oils, we can conclude that for Toyota Land Cruiser Prado the best option will synthetic oil, and the second place is occupied by semi-synthetics.

Now consider the parameters of engine oil, as well as how much to fill in depending on the type of engine and its displacement.

How much oil to pour: generations, engines

Model range 2002-2009 (Prado 120)

For gasoline engine 2.7 2TR-FE 163 hp from.:

How much to fill 5.8 - 5.1 liters
SAE parameters - 5W-30, 10W-30
API Standard - SJ, SL, SM, SN

For diesel engine 3.0 TD 1KD-FTV 173 l. from.:

How much to fill - 7.0 / 6.7 liters
Standards – DLD-1, ACEA B1, API CF-4, СF

For gasoline engine 1GR-FE 4.0 249 liters. from.:

How much to fill - 5.2 - 4.9 liters
SAE parameters - 15W-40, 20W-50
API standards - SJ, SL, SM, SN

Model range 2009-2013 (Prado 150)

How much to fill - 5.7-5.0 liters
API standards - SL, SM, SN

How much to fill - 7.0-6.7 liters
SAE parameters - 5W-30, 10W-30, 15W-40, 20W-50
API standards - G-DLD-1, ACEA - B1, API - CF-4; CF

For gasoline engine 1GR-FE 282 hp from 4.0 l.:

How much to fill - 6.1 - 5.7 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
API standards - SL, SM, SN

Model range 2013 - 2015 (Prado 150 restyling)

For gasoline engine 2TR-FE 2.7 163 hp from.:

How much to fill - 5.7-5.0 liters
SAE parameters - 0w-20, 5W-20, 5W-30, 10W-30
API standards - SL, SM, SN

For diesel engine 3.0 1KD-FTV 173 l. from.:

How much to fill - 7.0-6.7 liters
SAE parameters - 0W-30, 5W-30, ACEA C2, 10W-30, 15W-40, 20W-50
API standards - CF-4, CF

For gasoline engine 1GR-FE 282 hp from.:

How much to fill - 6.2-5.7 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
API standards - SL, SM, SN

Lineup 2015 – present in.

For petrol engine Prado 150 2.7 2TR-FE 163 hp from.:

How much to fill - 5.9-5.5 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
API standards - SL, SM, SN

The best manufacturers of motor oils

When choosing oil for Toyota Land Cruiser Prado, you should proceed from the parameters indicated on the label of the original Toyota 5W-30 product, or in the user manual. Alternatively, you can prefer an analogue oil, which is practically not inferior in quality to the original oil. Yes, among the best manufacturers analogue oils can be distinguished by Lukoil, Castrol, Shell, Elf, Mobile and others.

Toyota Land Cruiser Prado cars are not only in great demand, but also in great respect. This is a large SUV with good technical specifications, reliable power units, comfortable interior and impressive durability. Therefore, even samples from the 90s are still in demand, are in excellent condition and can impose competition on many modern cars.

Operating conditions affect the frequency of engine oil changes in Toyota Land Cruiser Prado.

Tasks of motor oils

But in order for the machine to serve for a long time and efficiently, it requires appropriate care. One of the main conditions for maintaining the performance of the motor is the timely replacement of motor, gear oils and other consumables. Not every car owner knows what oils to pour into the Toyota Prado 150 with a diesel engine, which often causes problems, you need to contact car services. The maintenance of such a car is not cheap, therefore, each visit to the service station costs the owner a large sum. Timely replacement and competent for the Toyota Prado car allows you to:

maintain the performance of all engine elements;
cool the system
ensure the operation of other nodes associated with the power unit;
maintain an optimal level of working fluids;
maintain the original engine power;
guarantee high vehicle dynamics;
prevent serious damage and costly repairs.

Therefore, it is important for Toyota Prado owners to monitor the condition of the car, in the engine and use only compounds recommended by the manufacturer.

Oil change interval

If you ignore the need to change engine oil, it will gradually begin to thicken, change its consistency and lose its physico-chemical properties. Dust, dirt, particles of chips formed as a result of friction of parts of the power unit will get into the liquid. All this negatively affects the performance of the car, regardless of the engine installed on the Toyota. Such a negligent attitude towards an SUV ends with a motor breakdown and expensive overhaul.

On new engines, an oil change is carried out approximately once every 10 thousand kilometers. But this figure can decrease to 5 - 7 thousand kilometers, depending on the age of the car, the current state of the engine and a number of other factors. There are drivers who do not roll these 5-10 thousand kilometers during the year. Then change the oil already according to temporary indicators, that is, once a year. The following factors influence the frequency in the Toyota Land Cruiser Prado engine:

the quality of the lubricant used in the motor;
intensity of operation of the machine;
current technical condition;
seasonality;
sharp temperature changes;
aggressive driving style;
road quality;
fuel used;
long idle time of the car in the garage or in the parking lot;
frequent driving in mountainous and hilly areas;
regular overloading of the car by weight (driving with a lot of cargo, constant use of a trailer).

Engine oil selection

The first thing to start with is the choice of fresh fluid to fill in the engine. Owners of Prado SUVs are interested in what kind of oil to pour into the engine, and what characteristics should be paid attention to. According to the official operating manuals that the manufacturer represented by Toyota applies to their SUVs, the degree of viscosity motor fluid must be:

10W30;
5W30;
5W20;

The recommended viscosity of the car oil and the temperature in which the car is operated are closely related to each other. Therefore, for each parameter of the viscosity of the motor fluid, there are recommended temperature limits. The choice largely depends on which region you live in, how much harsh winters or mild climate with enough high temperature even in winter. Japanese automaker recommend pouring in power units SUVs "Land Cruiser Prado" original oils that bear the appropriate name Toyota Motor Oil with characteristics suitable for a particular season and engine, viscosity, quality class, etc.

But the problem is that such original liquids are quite expensive. There are many worthy analogues on the market at a lower price. But it is not recommended to take too cheap ones either, since their efficiency will be noticeably lower, which will negatively affect the resource and quality of work. power plant. Therefore, the best alternative for official engine oil from Toyota are:

Mobil;
shell;
total;
Liqui Moly;
Castrol.

Choose among these manufacturers based on the recommended characteristics of motor lubricants for your Prado.

Filled oil volume

This question is the most relevant, because different engines and generations have their own indicators of the volume of lubrication. Today there are a total of 3 generations of Prado, not counting restyled versions:

90 "Cruisers" are no longer so relevant and are rare. Each of the last two generations is widely represented in the market of new and used cars, therefore it will be relevant to talk about the versions presented and the engines with which they can be equipped. The volume will be indicated by two digits. The smaller one provides for the required amount without changing the filter, and the larger number indicates how much lubricant will need to be filled in while changing the oil filter.

Let's say in advance that when changing the lubricant in the power unit, it is recommended to change the filters in parallel. This is also a consumable item that has limited time services.

120 (2002 - 2009 model years)

in gasoline engines "Prado 120" with a volume of 2.7 liters with a capacity of 163 liters. from. pour 5.1 - 5.8 liters. lubricants;
in a 3-liter diesel with 173 hp includes from 6.7 to 7.0 liters of engine oil;
a Prado 120 gasoline engine of 4.0 liters and 249 horsepower requires 4.9 - 5.2 liters. oils.

150 (2009 - 2013 model years)

5 - 5.7 liters are poured into a 163-horsepower gasoline engine. lubricants;
diesel 3.0 liters and 173 liters. from. requires 6.7 - 7 liters of liquid;
petrol 4.0-liter engine with 282 hp. from. needs 5.7 - 6.1 liters. oils.

150 (2013 - 2015 model years)

junior gasoline engine of 2.7 liters and 163 liters. from. uses 5 - 5.7 liters of lubricant;
three-liter diesel engine with 173 liters. from. requires 6.7 - 7.0 liters;
older gasoline engine with 282 hp from. filled with grease for 5.7 - 6.2 liters.

IN latest generation gasoline engine sample 2015 – 2017 model years, which has a volume of 2.7 liters and 163 horsepower power, car owners should take about 5.5 - 5.9 liters of motor lubricant. Be sure to pour into the Prado 120 and 150 the oil that corresponds to the official instruction manual. Consider the full volume of oil in the Prado 120 engine and its latest version 150. Knowing which engine oil is best suited for such a car, you can start replacing it yourself.

There is nothing complicated about this, although many owners of such machines do not bother to self service Japanese SUV, but simply entrust the work to specialists at a car service. This is largely true if you refer to skilled craftsmen And official dealers Toyota having stations Maintenance. But it also happens that you want or need to change the lubricant with your own hands. To do this, you need to know what oil is already in the engine, drain it and.

Checking the level and condition

Each car owner is obliged to carefully monitor the condition of his car, the behavior of the Toyota Prado, and the operation of the engine. Many signs clearly indicate that it is time to change the oil. If you buy an SUV from your hands, it makes sense to immediately change the lubricant and filter. The following points indicate the need to replace the lubricant:

gears begin to switch insufficiently clearly;
the engine runs, but does not develop maximum speed;
there is a lack of power;
increase in fuel consumption;
vibrations and extraneous noise occur during movement.

Sometimes these signs speak of more serious problems. But first, check the level and condition of the oil. To do this, remove the special probe, which is located in engine compartment, wipe it with a dry cloth, reinsert it and remove it again. By the marks on the dipstick, you will see at what level the lubricant is in the motor. Additionally, a little oil can be dripped onto white paper and carefully examined. If you see particles of debris, dust and dirt, this indicates a clearly poor condition of the fluid. It would be ideal to compare the old oil with the new one. If there are significant differences in color (the old one is darker), be sure to replace it.

It differs somewhat depending on the type of engine and the generation of the Japanese SUV itself. But structurally, in this regard, the machines did not change much, which makes it possible to change the working fluid approximately according to the same scheme. If the check showed that it is time to change the lubricant, start from the following algorithm of actions:

The flushing stage raises logical questions that the use of chemical compounds can adversely affect the operation and condition of the motor. After all, partially the mixtures remain in the system, which is why they can react with new oil, foam and lead to the formation of a new plaque, deposits and pollution.

Therefore, experienced Toyota Prado owners advise replacing flush mixtures with semi-synthetic or mineral oils. They are flushed, and then the working synthetic mixture is already poured. In order to optimize the operation of Prado engines and prevent premature wear of parts due to the loss of its physical and chemical properties by oil, owners of such SUVs should refuel only at high-quality gas stations.

Thank you all for your attention! Subscribe to our site, leave comments, ask questions and tell your friends about us!

Motor oil, replacement volume 7 l. The car can be equipped with a particulate filter (it looks like a barrel of 5-10 liters and stands in the place where the catalyst is located in gasoline cars). In this case, the manufacturer recommends JASO DL-1 approval. This is not only a low ash content, but also a package of additives aimed at reducing the wear of a Japanese diesel engine, which is structurally different from a European one.From Europe, engine oils with ACEA C2 approval are recommended.If particulate filter no, use oils with API CF/CF-4 approvals. The key to a long engine life is frequent oil changes, we recommend 5-7 thousand km.

Oil in automatic transmission, total volume 10.6 l . Toyota WS type fluid or equivalent is used. Replacement recommendations: partially every 30-40 thousand km. On machines with decent mileage, we recommend installing an external oil filter.

Oil in rear axle , volume 2.1 - 2.75 l, only with API classGL-5. Replacement every 20-30 thousand km. All options are shown below.

Oil in front gear, volume 1.35 - 1.45 l, only with API classGL-5. The manufacturer is supposed to pour LT 75W-85, this is a regular gear oil, with a slightly reduced high temperature viscosity.You can pour 75W-90, class GL-5. Replacement every 20-30 thousand km.

Oil in transfer case , volume 1.4 l.Installed razdatka VF4BM, a modified version of the one that was placed on the previous body. The dispenser is electronically controlled by the brain, blocking center differential. The rest of the dispenser retained the previous design. In connection with these changes and the general trend towards a decrease in the viscosity of oils, Toyota recommends using oil for dispensing. Some owners pour traditional 75W-90 with a GL-4 grade.Replacement every 40-60 thousand km (every second replacement in the front and rear gearboxes).

Antifreeze, total volume 13.1 - 15 l (with front heater); 15 l (two heaters - front and rear). The manufacturer recommends an organic pink antifreeze with an extended lifespan.Recommendations for replacement - the first time in 7-8 years, then 1 time in 3-4 years.

Oil in power steering, the volume is about 1 - 1.5 liters. Or special liquids with the inscription PSF, or automatic transmission fluid

Glow plugs (incandescent)- 4 things

Brake fluid. Look closely at the labels on the lid. expansion tank brake system. If it says "only DOT-3" or "only BF-3", use only Dot-3 grade fluid. Replacement every two years or every 40 thousand km.

Batteries. The diesel Prado is equipped with 2 batteries of the same size, but with different polarity. Pay attention to this. In the selection, these batteries go one after another.

headlight lamps. If the dipped beam is with halogen lamps, then the base is H11, if xenon, then the base is D4S. High beam only halogen lamps, base HB3.

Land Cruiser Prado 150 - reliable SUV fourth generation from the Japanese automaker Toyota. Since 2012, at the plant in Vladivostok, the car has been equipped with gasoline 1GR-FE (4 l), 2TR-FE, (2.7) l. and turbodiesel engine 1KD-FTV (3 l). In this case, we will show how to change the oil in a 1KD-FTV diesel engine.

When, how much and what kind of oil is needed for Prado 150 (diesel)

In order to choose the right oil for replacement, you must use the instructions that came with your car.

If your vehicle is on warranty service, then the use of oils from other manufacturers is not recommended.

For 1KD-FTV diesel engine and its modifications: KDJ150R-GKFEYW, KDJ150R-GKAEYW, KDJ150L-GKFEYW, KDJ150GKAEYW, KDJ155R-GJFEYW, KDJ155R-GJAEYW, KDJ155L-GJFEYW and KDJ155L-GJFEYW and KDJ155L-GJAEYW, the best alternative engine oil for Genuine Motor Oil. Also, after the end of the warranty, you can use an equivalent engine oil that meets the requirements of API quality and oil viscosity.

For a complete replacement, the following types of oils are suitable: G-DLD-1, API CF-4, CF or ACEA B1, in extreme cases, API CE or CD brands can be used. The recommended viscosity of the oil must correspond to the temperature regime of the climatic conditions of the vehicle.

For example, when using oil with a viscosity of SAE 10W-30 or higher at extremely low temperatures, it may be difficult to start the 1KD-FTV engine.

According to instructions filling volume lubricants will be:

for replacement with 7.0 l filter;
for replacement without filter 6.7 l.

Necessary tools and materials for oil change

Tools needed for oil change:

wrench 24 mm;
oil filter puller;
container for draining;
rags;
new oil filter and oil.

Consumable part numbers:

The original Toyota Motor Oil engine oil (5 liter canister) article - 888080375 will cost about 2650 rubles. To replace the original, with a savings of 200 rubles, you can take RAVENOL 4014835723559 from the manufacturer - the price of such an oil is 2450 rubles. Original oil filter for Toyota engine 9091520003. Price 900 rubles. Analogs: MANN-FILTER W71283 - 240 rubles, BOSCH 451103276 - 110 rubles. The original gasket for the drain bolt is Toyota 90430-22003, at a price of 64 rubles.

Prices are for the summer of 2017 for Moscow and the region.

etlib.ru

Recommendations for changing engine oil in a Toyota Land Cruiser Prado engine

Toyota Land Cruiser Prado cars are not only in great demand, but also in great respect. This is a large SUV with good technical characteristics, reliable power units, comfortable interior and impressive durability. Therefore, even samples from the 90s are still in demand, are in excellent condition and can impose competition on many modern cars.

Operating conditions affect the frequency of engine oil changes in Toyota Land Cruiser Prado.

Tasks of motor oils

But in order for the machine to serve for a long time and efficiently, it requires appropriate care. One of the main conditions for maintaining the efficiency of the motor is the timely replacement of motor, transmission oils and other consumables. Not every car owner knows what oils to pour into the Toyota Prado 150 with a diesel engine, which often causes problems, you need to contact car services. The maintenance of such a car is not cheap, therefore, each visit to the service station costs the owner a large sum. Timely replacement and competent choice of engine oil for a Toyota Prado car allows you to:

maintain the performance of all engine elements;
cool the system
ensure the operation of other nodes associated with the power unit;
maintain an optimal level of working fluids;
maintain the original engine power;
guarantee high vehicle dynamics;
prevent serious damage and costly repairs.

Therefore, it is important for Toyota Prado owners to monitor the condition of the car, change the engine oil on time and use only formulations recommended by the manufacturer.

Oil change interval

the quality of the lubricant used in the motor;
intensity of operation of the machine;
current technical condition;
seasonality;
sharp temperature changes;
aggressive driving style;
road quality;
fuel used;
long idle time of the car in the garage or in the parking lot;
frequent driving in mountainous and hilly areas;
regular overloading of the car by weight (driving with a lot of cargo, constant use of a trailer).

Engine oil selection

The recommended viscosity of the car oil and the temperature in which the car is operated are closely related to each other. Therefore, for each parameter of the viscosity of the motor fluid, there are recommended temperature limits. The choice largely depends on which region you live in, how severe winters there are or how mild the climate is with fairly high temperatures even in winter. The Japanese automaker recommends pouring original oils into the power units of Land Cruiser Prado SUVs, which are appropriately called Toyota Motor Oil with characteristics, viscosity, quality class, etc. suitable for a particular season and engine.

But the problem is that such original liquids are quite expensive. There are many worthy analogues on the market at a lower price. But it is not recommended to take too cheap ones either, since their efficiency will be noticeably lower, which will negatively affect the resource and quality of the power plant. Therefore, the best alternative for official engine oil from Toyota are:

Mobil;
shell;
total;
Liqui Moly;
Castrol.

Choose among these manufacturers based on the recommended characteristics of motor lubricants for your Prado.

Filled oil volume

This question is the most relevant, since different engines and generations have their own lubricant volume indicators. Today there are a total of 3 generations of Prado, not counting restyled versions:

Let's say in advance that when changing the lubricant in the power unit, it is recommended to change the filters in parallel. This is also a consumable item with a limited service life.

120 (2002 - 2009 model years)

in gasoline engines "Prado 120" with a volume of 2.7 liters with a capacity of 163 liters. from. pour 5.1 - 5.8 liters. lubricants;
in a 3-liter diesel with 173 hp includes from 6.7 to 7.0 liters of engine oil;
a Prado 120 gasoline engine of 4.0 liters and 249 horsepower requires 4.9 - 5.2 liters. oils.

150 (2009 - 2013 model years)

5 - 5.7 liters are poured into a 163-horsepower gasoline engine. lubricants;
diesel 3.0 liters and 173 liters. from. requires 6.7 - 7 liters of liquid;
petrol 4.0-liter engine with 282 hp. from. needs 5.7 - 6.1 liters. oils.

150 (2013 - 2015 model years)

junior gasoline engine of 2.7 liters and 163 liters. from. uses 5 - 5.7 liters of lubricant;
three-liter diesel engine with 173 liters. from. requires 6.7 - 7.0 liters;
older gasoline engine with 282 hp from. filled with grease for 5.7 - 6.2 liters.

In the latest generation of the 2015-2017 model year gasoline engine, which has a volume of 2.7 liters and 163 horsepower, car owners should take about 5.5 - 5.9 liters of engine lubricant. Be sure to pour into the Prado 120 and 150 the oil that corresponds to the official instruction manual. Consider the full volume of oil in the Prado 120 engine and its latest version 150. Knowing which engine oil is best suited for such a car, you can start replacing it yourself.

There is nothing complicated about this, although many owners of such cars do not bother to maintain a Japanese SUV on their own, but simply entrust the work to specialists at a car service. This is largely correct if you contact qualified craftsmen and authorized Toyota dealers with service stations. But it also happens that you want or need to change the lubricant with your own hands. To do this, you need to know what oil is already in the engine, drain it and fill in fresh grease.

Checking the level and condition

gears begin to switch insufficiently clearly;
the engine runs, but does not develop maximum speed;
there is a lack of power;
increase in fuel consumption;
vibrations and extraneous noise occur during movement.

Sometimes these signs also indicate more serious problems. But first, check the level and condition of the oil. To do this, remove the special probe, which is located in the engine compartment, wipe it with a dry cloth, insert it into place and remove it again. By the marks on the dipstick, you will see at what level the lubricant is in the motor. Additionally, a little oil can be dripped onto white paper and carefully examined. If you see particles of debris, dust and dirt, this indicates a clearly poor condition of the fluid. It would be ideal to compare the old oil with the new one. If there are significant differences in color (the old one is darker), be sure to replace it.

Replacing engine fluid is somewhat different depending on the type of engine and the generation of the Japanese SUV itself. But structurally, in this regard, the machines did not change much, which makes it possible to change the working fluid approximately according to the same scheme. If the check showed that it is time to change the lubricant, start from the following algorithm of actions:

The flushing stage raises logical questions that the use of chemical compounds can adversely affect the operation and condition of the motor. After all, some mixtures remain in the system, which is why they can react with new oil, foam and lead to the formation of new plaque, deposits and contaminants.

Thank you all for your attention! Subscribe to our site, leave comments, ask questions and tell your friends about us!

vibormasla.ru

Do-it-yourself oil change for Toyota Prado

SUV medium-sized Japanese concern Toyota. From the first generation, this “baby” had high cross-country ability with comfort passenger car. Initially, the car was built on the basis of other Toyota models, but from the third generation, an independent Land Cruiser Prado model appeared. Despite the great power and seemingly large dimensions, servicing this car is not more difficult than the others. Changing the oil and filters at the service station costs a tidy sum, but this is not such a difficult task.

Refueling volumes and oil selection

As for the choice of oil, the viscosity classes 5W-30 and 10W-30 are traditional for the Prado. What viscosity to choose? Everything is simple. Viscosity 5W-30 works well in the temperature range from -30 to +40 degrees. Viscosity 10W-30 runs from -20 to +40.

Changing the oil

Video materials

If you still have any questions or have any questions during the replacement process, we recommend watching an excellent video, everything is clearly shown there what and where.

masllo.com

Changing the oil in a Toyota Prado engine

To date, changing the oil in a Toyota Prado 150 diesel engine is a process that can be carried out with my own hands. This does not require special knowledge, skills or abilities, just a few hours and a minimum set of tools. For a quality replacement lubricant you should strictly follow the recommendations of professionals.

When is the oil changed?

Oil change schedule according to technical management user is 5 thousand kilometers with intensive use of the car. With occasional use vehicle it is recommended to renew the motor lubricant every 10 thousand kilometers.

Signs that you need to change your engine oil:

Product color change.
Changing the viscosity of motor lubricant.
A mixture of fuel and engine lubricating fluid.
Visible mechanical damage in the system.
Smell change.
Reducing the amount of lubricant to the minimum mark, which is at the level of the dipstick.

Checking the lubrication in the system should be carried out by the owner of the car on a regular basis. Each owner determines the frequency of replacing engine oil independently, since in practice it does not correspond to the operating regulations, because it largely depends on the driving style and conditions, the quality of the lubricant and seasonal conditions.

What oil to choose?

The choice of oil is a responsible process, since not only the duration of the operation of the lubricant itself and the engine as a whole, but also the quality of the vehicle's power unit depends on its quality and compatibility. First of all, you should focus on the following characteristics:

Composition: mineral or synthetic.
Viscosity.
Manufacturer's originality.

Do-it-yourself oil change process in a Toyota Prado engine

Required Tools to change the engine lubricant in the system:

Rags.
Washing liquid.
New motor lubricant.
New oil filter.
Gloves.
Canister or any basin.

A step-by-step instruction for replacing the engine lubricant in the system should include the following steps.

The formation of a strong protective film on the internal elements of the motor is possible if an oil corresponding to the parameters of the engine is used. The film formed by the oil protects the power unit from overheating and premature wear. Our article describes the characteristics of the recommended engine oil for Toyota Prado.

Model 2001 release.

Petrol power units

Scheme 1. Recommended viscosity for 5VZ-FE engines.

Based on scheme 1, 5w-30 all-weather oil is poured at temperatures below +8 0 C, it is perfect for the winter. At the same time, 10w-30 is used at temperatures above -18 0 C.

Scheme 2. Recommended viscosity for 3RZ-FE motors.

According to scheme 2, for very low temperatures, it is worth using 5w-30 motor oils, and at temperatures above -18 0 C, use lubricants 10w-30, 15w-40, 20w-50.

Diesel car engines

According to the manual for engine oils for diesel engines 1KD-FTV and 1KZ-TE Toyota Prado are subject to the following requirements by the manufacturer:

lubricant must comply with G-DLD-1 standards;
types of lubricants CF-4 or CF according to the API system (sometimes it is allowed to use CE or CD).

Viscosity selection for 1KD-FTV engines is carried out according to scheme 3, and for 1KZ-TE engines according to scheme 4.

Scheme 3. Dependence of the viscosity index of the lubricant (for 1KD-FTV engines) on the temperature outside the machine.

In accordance with scheme 3 manufacturer Toyota Prado is recommended to fill in 5w-30 oil for a wide temperature range from -29 0 С (and less) to +38 0 С (and more). And liquids 10w-30, 15w-40, 20w-50 should be used provided that the thermometer is above -18 0 C.

Scheme 4. The influence of ambient temperature on the selection of the viscosity of motor fluid for 1KZ-TE engines.

According to scheme 4, 5w-30 lubricants should be used at temperatures below +8 0 C, and oils 10w-30, 15w-40, 20w-50 should be used at temperatures above -18 0 C.

Refueling volumes

Refueling tanks for Toyota Prado:

Power units 1KD-FTV:

7.0 l with oil filter change;
6.7 l excluding filter device.

Engines 1KZ-TE:

7.0 l with oil filter change;
6.3 liters excluding oil filter.

Auto engines 5VZ-FE:

5.2 l with oil filter;
4.9 liters without oil filter.

3RZ-FE engines:

4.7 without oil filter;
5.4 with oil filter change.

The amount of engine oil between the "maximum" and "minimum" marks on the dipstick for Toyota cars Prado is:

1.5 l for 1KD-FTV motors;
1.2 l if auto engines 1KZ-TE.

Toyota Prado 120 2002-2009 release

Model 2001 release.

Gasoline engines

According to the car's operating instructions, the recommended engine oil for Toyota Prado must meet the following parameters:

original Toyota oils Genuine Motor Oil or equivalent lubricants that meet the requirements of the vehicle manufacturer for the quality of lubricants:
universal motor fluids of class SL or SJ with the inscription "Energy Conserving" (energy-saving) according to API standards;
motor lubricants certified by ILSAC.

The selection of the viscosity of the oil is carried out according to scheme 5.

Scheme 5. Recommended viscosity for Toyota Prado gasoline engines.

According to scheme 5, if you fill in engine fluids 10w-30, 15w-40, 20w-50 at very low temperatures, then starting the engine will be difficult. For temperatures below +8 0 C, it is recommended to pour 5w-30.

Diesel power units

According to the manual for diesel engines, it is necessary to use motor oils with the following parameters:

liquids conforming to class G-DLD-1;
oil classes CF-4 or CF according to API classification (it is acceptable to use CE or CD).

To select the viscosity, use scheme 5.

Refueling volumes

The volume of oil between the maximum and minimum mark on the Toyota Prado dipstick is:

1.3 l if engines 2TR-FE
1.5 liters in the case of 1GR-FE or 5L-E engines;
1.2 l for 1KZ-TE motors.

Toyota Prado 150 since 2009

Model 2012 release.

1GR-FE petrol engines (GRJ150L-GKTEKW and GRJ150L-GKTEK models)

The Toyota Prado manual contains the following requirements for lubricants:

Toyota Genuine Motor Oil branded lubricants or equivalent in terms of parameters;
class of motor fluids SL or SM with the inscription "Energy Conserving" (energy-saving) or SN with the designation "Resource-Conserving" (resource-saving) according to API standards;
fluids that meet the requirements of ILSAC and have a viscosity of 15w-40.

You can select the viscosity of the oil for the GRJ150L-GKTEKW model according to scheme 6, and for the GRJ150L-GKTEK model according to scheme 7.

Scheme 6. Recommended viscosity of engine fluid for the GRJ150L-GKTEKW model.

The manufacturer in the car manual indicates that it is preferable to fill in 0w-20 liquids, they are designed for a wide temperature range from -18 0 C (or less) to +27 0 C (or more). If there are no 0w-20 motor oils, then 5w-30 can be used, but the next time you change it, you need to fill in 0w-20. Liquids 10w-30, 15w-40 are poured at an air temperature of more than -18 0 C, it is better to pour 15w-40 for the summer.

Scheme 7. Recommended motor oil viscosity for the GRJ150L-GKTEK model.

According to scheme 7, at a temperature index below +10 0 С, 5w-30 is used. If the air temperature is above -18 0 C, pour 10w-30 or 15w-40.

Petrol engines 2TR-FE

According to the Toyota Prado instructions, oils with the following characteristics should be used:

type of motor oil SL or SM with the designation "Energy Conserving" (energy-saving) or SN with the marking "Resource-Conserving" (resource-saving) according to API standards;
motor oils that meet ILSAC requirements and have a viscosity of 15w-40.

To select the viscosity parameters of engine oil, use Scheme 8.

Scheme 8. Recommended viscosity of the oil and the temperature at which it is permissible to use it.

At extremely low temperatures, to ensure a quick engine start, it is recommended to use 0w-20, 5w-20, 5w-30. With a thermometer reading above -18 0 C, it is advisable to use 10w-30 or 15w-40.

Diesel auto engines 1KD-FTV (model KDJ150L-GKFEYW and KDJ150L-GKAEYW)

According to the manual for the Toyota Land Cruiser Prado, the car manufacturer recommends filling in motor oils with the following characteristics:

original Toyota Genuine Motor Oil lubricants or equivalent oil parameters;
CF-4 or API CF;
B1 according to ACEA standards.

Use Chart 9 to select viscosity.

Scheme 9. Recommended motor oil viscosity depending on the temperature outside the car.

Based on scheme 9, at extremely low temperatures it is preferable to pour 5w-30, while lubricants 10w-30 or 15w-40 will not provide a quick engine start, they are used at temperatures above -18 0 C

Diesel engines 1KD-FTV (model KDJ150L-GKAEY except for EURO IV)

branded Toyota Genuine Motor Oils or alternative lubricants that have the appropriate characteristics;
according to API classification of CF-4 or CF lubricants (it is acceptable to use CE or CD);
according to ACEA class B1.

The choice of lubricant viscosity is performed using scheme 10.

Scheme 10. The recommended viscosity of the car oil and the temperature at which it is permissible to use it.

According to scheme 10, it is preferable to use 5w-30 motor oils under temperature conditions from -18 0 С (and lower) to +27 0 С (and higher), 10w-30, 15w-40 and 20w-50 are used at temperatures above -18 0 С .

Diesel power units 1KD-FTV (model KDJ150L-GKAEY complies with EURO IV)

lubricants corresponding to CF-4 or CF according to the API system;
B1 according to ACEA standards.

The viscosity of the lubricant is selected according to scheme 9.

Diesel engines 1GD-FTV

original Toyota Genuine Motor Oil lubricants or motor oils with similar characteristics;
ACEA class C2 only.

Viscosity selection is performed according to scheme 11.

Scheme 11. Recommended lubricant viscosity.

It is preferable to use oils 0w-30 they provide optimal consumption fuel mixture car, as well as quick start of the engine in cold weather. In the absence of these lubricants, it is permissible to pour 5w-30.

Refueling volumes

The volume of engine fluid required for replacement is:

1GD-FTV engines:

7.7 l s oil filter;
7.2 liters without changing the oil filter.

Power units 1KD-FTV:

7.0 l with oil filter;
6.7 liters without oil filter.

Motors 2TR-FE:

5.9 l with filter;
5.5 liters without oil filter.

Power units 1GR-FE:

6.2 l with oil filter;
5.7 liters without filter.

Conclusion

The recommended engine oil for Toyota Prado must have the appropriate markings, tolerances on the canister, as well as marks indicating the quality of the engine oil. Figures 1, 2 and 3 show signs that make it easier for the consumer to choose.

Figure 1. Car oil certified by ILSAC.

Figure 2. API service symbol.

Figure 3. The DLD trademark indicates that the oil complies with ACEA, AAM, EMA, JAMA standards.

Also on topic

Arrest in a dream why dream

Lunar calendar of haircuts and coloring for September

The magic of numbers. Why dream of Blow? Why dream of being stabbed in the back

I dreamed that I was arrested

The meaning of the name Irada, character and fate The meaning of the name Irada and her fate