How to change the oil in a Hyundai Accent engine. How to change the engine oil on a Hyundai Accent

Everyone knows that after a while it is necessary to diagnose the car and replace lubricants. Otherwise, the main components of the car will quickly fail. If you are a happy owner of a budget Hyundai Accent, then you cannot help but worry about the following questions: what engine oil to pour into the engine and gearbox Hyundai Accent? How is the replacement done? Below is some basic information on these issues.

What kind of lubricant to pour in Hyundai Accent

Hyundai spends a lot of effort on the development and improvement of highly economical and environmentally friendly engines. In parallel with this, companies developing various fluids are improving lubricant consumables. So, Total strives to create lubricants that can be changed after a significant period of time.

Lubricant for the "heart" of the car

What engine oil can be poured into the Accent? For this brand of car, any engine oil is suitable that corresponds to the markings 5W-40, 10W-40 and 0W-30 of varying degrees of viscosity. All of these markings are available under the Total QUARTZ range. Each of them is designed for different operating conditions: Total QUARTZ 9000 5W-40 for standard moderate conditions, Total QUARTZ 7000 10W-40 for operation in the warm southern conditions of our country and Total QUARTZ 9000 Energy 0W-30 for cold northern regions.

What other engine oil can be poured into Hyundai Accent? It is impossible not to mention Castrol Magnatec here. It received top marks from API (American Institute) and ACEA experts. Its use allows you to slightly increase the maximum power and reduce fuel consumption.

Key Update Rules lubricating fluid in the heart" vehicle

Replacing the lubricant in the engine with your own hands

To replace the lubricant in the engine, warm up the car and drive it into an inspection hole. Then open the grease filling compartment, and clean the oil pan from dust and dirt from the bottom of the car. Loosen the drain hole with a wrench and drain the used lubricant into a basin or container (4 l).

Draining used lubricant

Be careful not to burn yourself with hot oil. Within 10 minutes, the liquid should drain completely, then wipe the oil pan dry.

But that is not all. It is also necessary to drain the lubricating fluid from the oil filter. However, the tightening may not give in. In this case, use a special removable tool.

If there is none, you can carefully punch through the filter and unscrew it. Before installing a new filter, clean and dry the seat. At the same time, fill the filter up to half with engine oil.

After oil filter in the engine is safely fixed in its seat, you will need to pour about 3 liters of lubricating fluid into the hole specially provided for this and start the engine.

Then check for leaks near the oil filter and drain hole. If everything is hermetically sealed, they should not be. Also make sure that the oil control lamp in the car is not on (it may go out with a delay - this is normal). After that, turn off the engine and allow time (about 3 minutes) for the lubricant to drain into the oil pan.

Then you need to check the liquid level in the pan (do not forget to put the machine on a flat surface before this). Do this with a special probe. Wipe it first and re-insert it into the dipstick hole. Please note that it has an "F" mark (Full - full). You need to pour so much lubricant so that the fluid level is no more and no less than this mark.

It happens that during the diagnostics the emergency lamp does not go out. If this happens to you, stop the engine immediately. After that, check the lubrication level. If it is not enough, you need to fill it up to the norm. If fluid is present, the check sensor may be faulty.

Independent renewal of the lubricating fluid by the "semi-collective farm" method

Checking the oil level in the gearbox

Before checking the lubrication level in the automatic transmission with a dipstick, you need to warm up the car. To do this, you will have to drive 15-20 kilometers. Next, without stopping the engine, turn on the parking mode in automatic box gears. Remove the dipstick and wipe it dry, then check the level of lubricant in the automatic transmission. If she got to the “HOT” mark, then everything is in order with the oil, if not, it’s time to change.

If there is not enough fluid, air can enter the gearbox and foam the lubricant. This will lead to the fact that it will not sufficiently envelop the moving parts of the transmission, which will lead to their rapid wear and failure of the mechanism.

Replacement of automatic transmission fluid

Plant Manufacturer Hyundai recommends changing automatic transmission fluid every 4 years or 60,000 km, whichever comes first. Whether a lubricant change is needed will help determine the method described above. Usually, towards the end of its life, the car begins to make grinding sounds, and gears are shifted with difficulty. A good driver will not wait for such warning signs.

If a lubricant change is still necessary, you have a choice: completely drain the old lubricant and fill in new, or drain it halfway. The second option is simpler, and in the first case, you will need a hydraulic stand designed for this, which is connected to the automatic transmission cooling system.

You can simply drain the oil through the hole in the box below yourself at home, but in this case only a third of it will be removed. To completely drain all the grease and replace it with a new one, you will have to go to the service station.

And a little about the secrets of the Author

My life is not only connected with cars, namely repair and maintenance. But I also have hobbies like all men. My hobby is fishing.

I started a personal blog where I share my experience. I try a lot of things, various methods and ways to increase the catch. If interested, you can read. Nothing more, just my personal experience.

Attention, only TODAY!

To maintain the normal operation of the engine on a Hyundai Accent, also known as TagAZ, it is necessary to periodically change the lubricating fluid. This simple operation is easy to do with your own hands, if you clearly follow the instructions and perform the necessary actions.

Stages of changing the lubricant Hyundai Accent

When changing the oil, it will not be superfluous to inspect all components for smudges, so that if a leak is detected, take measures to eliminate it. The best option for replacement there will be a pit or overpass, for more convenient access to the drain holes.

Oil change instructions will be useful for owners of the following Hyundai models:

• Hyundai Accent (Hyundai Accent Restyling);
• Hyundai Accent Tagaz (Hyundai Accent Tagaz);
• Hyundai Verna (Hyundai Verna);
• Hyundai Excel (Hyundai Excel);
• Hyundai Pony (Hyundai Pony).

Petrol engines with a volume of 1.5 and 1.3 liters are considered popular engines, as well as diesel version with 1.5 liter engine. There are models with a different displacement, but more often they were sold in other markets.

Waste fluid drain

You need to change the lubricant on a warm, but slightly cooled engine, so there is a little time to remove the protection. To get normal access to the pan, as well as the oil filter.

To unscrew the filter element, it is desirable to have a special puller. If it was not available, you can try to unscrew the filter with improvised means. For these purposes, you can use, for example, an old alternator belt, a regular belt, a bicycle chain, or a simple screwdriver.

Unscrewing the oil filter using improvised means

Using this method, it will be possible to drain the maximum of the used oil, after which you can proceed to further actions. The main thing is not to forget, everything that we unscrewed needs to be put in place.

Flushing the lubrication system

1. Flushing the engine on a Hyundai Accent car should be carried out only in exceptional cases, which include:
2. The purchase of a used car, when you cannot be sure of the quality, as well as the regularity of the replacement of the lubricant composition.
3. During operation, the service replacement interval was repeatedly exceeded.
4. The operation of the engine with constant frequent overheating, which contributes to coking, as well as other deposits.
5. In cases of switching to another type of oil, for example, from synthetics to semi-synthetics.

Flushing for the Hyundai Accent engine is of several types:

• Five-minute or seven-minute, able to clean even the most difficult deposits. They must be used very carefully, strictly follow the instructions printed on the package. It is recommended to use them only when absolutely necessary. Since there is a high probability of causing premature wear of the sealing glands. And also clog the oil channels with particles of washed off soot.
• Special compounds that are added to the oil several hundred kilometers before the proposed replacement. They are more gentle, but there is also a possibility of clogging of oil channels.
• Flushing oil is the most gentle method of cleaning the engine from the inside. Such a composition is poured after draining the mining, the engine runs for 15-20 minutes, after which the liquid with deposits is drained. The absence of aggressive additives in the flushing composition gently cleans the motor, but is not able to remove strong contaminants.
• The usual oil that you are going to use when changing. This method is not so popular because of its high cost.

Before flushing a Hyundai Accent, you should weigh all the pros and cons. And also understand that it will not work to completely drain the liquid. Part of it will remain in the channels, which will then mix with the new oil.

Installing a filter, filling in new engine fluid

If the Hyundai Accent lubrication system is tight and does not require repair work to eliminate the leak, you can proceed to the bay of fresh oil. In addition to the oil itself, you will need a new Hyundai / Kia drain plug gasket 21513-23001 (2151323001). As well as the original oil filter Hyundai / Kia 26300-35503 (2630035503). If you wish, you can look at analogues on the Internet.

Expendable materials

When everything is ready, go to the bay:

1. Putting in place drain plug with new puck.
2. We twist and put the oil filter in place. Pre-lubricate the sealing rubber ring with fresh oil.
3. Pour new oil into the filler neck.
4. We check the level on the dipstick, it should be between the MIN and MAX marks.
5. We start the engine, let it run for 10-15 seconds, then turn it off.
6. After 5 minutes, check the level with a dipstick, top up if necessary.

There are several opinions about changing the oil filter. Many car owners advise filling it with new oil before installation. However, in the official instruction manual for the Hyundai Accent. And also in the information from global filter manufacturers, it is recommended to simply lubricate the sealing ring.

Change frequency, which oil to fill

According to the manufacturer's regulations, service replacements engine oil are carried out after 15,000 kilometers or with an interval of 1 year. But many motorists consider this interval to be too high, while recommending cutting it in half.

By recommendation automobile concern to fill in the lubrication system of gasoline engines, you must use the original synthetic oil Hyundai Turbo Syn 5W-30 or 5W-40. It is allowed to use Hyundai Super Extra 5W-30 semi-synthetics. For diesel engines used Hyundai Premium DPF Diesel 5W-30.

From factory to Hyundai models Accent was most often filled with the synthetic compound Shell Helix Ultra 5W-30. But on the Internet you can often find reviews of people that they have oil filled with other viscosity parameters, for example 5W40. Most likely this is due to the operation of cars in different climatic zones, as well as serviced by different dealers.

When selecting analogues, each has its own preferences for brands of oil manufacturers. Someone uses Korean, someone is looking for cheaper and floods Lukoil. But most trust global brands such as Elf, Shell or Liquid Molly.

How much oil is in the engine lubrication system, volume table

Leaks and problems

The more Hyundai Accent mileage becomes, the more problems appear, as in principle in any car. Some motorists are beginning to complain about increased consumption oils. Others continue to operate the car, citing the fact that zhor 1-2 liters from replacement to replacement is normal.

Most common problem increased consumption in this model are valve stem seals, or lying oil scraper rings, but with a high probability these are caps. Therefore, their replacement, as well as the transition from synthetics to semi-synthetics, will solve the increased zhor. Also, in some cases, if there is a problem with the caps, oil can be thrown into the air filter.

Some motorists observe another problem when oil appears in the candle wells or even on the surface of the valve cover. This indicates wear on the sealing rings of the spark plug well.

We order rings by article 2244323001 for subsequent replacement. At the same time, do not forget to order the valve cover gasket 2244126020. Since the cover will need to be dismantled when eliminating this malfunction.

Video

To prevent wear and ensure normal operation car engine the motor must use operating oil. If the consumable loses its properties, it will not be able to lubricate the rubbing parts and components of the power unit. In this article, we will talk about what kind of oil to pour into the Accent and what the do-it-yourself fluid replacement process is.

[ Hide ]

How often is replacement required?

In Hyundai Accent TagAZ 2004, 2006, 2007, 2008, 2013 and another year of manufacture, according to the recommendations of the manufacturer, it is necessary to change the lubricant with a run of 12-15 thousand kilometers. In fact, domestic experts recommend replacing the fluid in the car's engine at least every 6-10 thousand km.

There are a number of factors that cause a fluid to lose its performance:

• seasonality of using the machine, taking into account temperature changes at different times of the year;
• driving style - aggressive or gentle;
• the amount of loads that are placed on the engine;
• duration of operation of the power unit in traffic jams;
• the quality of the road surface;
• the volume of the power unit;
• engine number, as well as its year of manufacture.

These factors can reduce the life of the engine fluid, regardless of the mileage of the car. If the power unit operates in intensive conditions, then experts advise changing the oil every six months..

What is the best oil to use?

If you do not know which engine oil to fill in the engine Hyundai car Accent with mileage, you need to understand the products recommended by the manufacturer. Any oil that meets the viscosity characteristics of 5W20, 5W30, 5W40 is suitable for operation. The vehicle manufacturer recommends just such a search order for lubricants. If it is not possible to find a product with a viscosity grade of 5W20, a 5W30 fluid can be used.

An important factor in the selection of a product is the style of movement. If you prefer a more relaxed driving style, experts recommend pouring Leichtauf Special LL SAE 5w-30 grease into the Accent 8 or 16 valves. This oil has high anti-friction characteristics. Under severe operating conditions, the lubricant prevents the formation of oxidation in the system and contributes to fuel economy. If you prefer a more aggressive driving style, CeraTec additives can be added to the powertrain. They are manufactured according to molybdenum-based technologies using ceramic components. The motor is provided reliable protection when working in aggressive conditions.

The car manufacturer advises consumers to use Aral, Mannol and Liquid Moli oils. These products are ideal for use in modern engines. Lubricants increase the resistance to oxidation of the base products and are characterized by an extended service life. With proper engine operation, fuel economy can be achieved. It does not matter if synthetics are used or semi-synthetics.

The manufacturer Hyundai allows the use of fluids in motors that correspond to the ACEA C3 viscosity class:

• Shell Helix Ultra;
• Aral SuperTronik LongLife 3;
• Elf Solaris;
• Longtime High Tech;
• Midland Crypto.

User Evgeniy Sagaydak spoke in detail in his video about the choice of engine fluid for the Accent ICE.

Filter element selection

The oil filter also belongs to the category of consumables, it also needs to be changed. According to the manufacturer's recommendations, it is best to use original filter devices. They allow you to effectively clean consumables from impurities and contaminants, as well as wear products of the power unit. In the absence of original filters, installation of analogues is allowed.

We are talking about devices of brands:

• ALCO Filter;
• AMC Filter;
• Bosch;
• Ashika;
• blue print;
• champion;
• Fiaam;
• Fram;
• Filtron.

Level control and required volume

It is important to know exactly how many liters to pour into the power unit. If the amount of lubrication is insufficient, this will lead to malfunctions in the machine's motor. And an excess volume of liquid will cause the sealing elements and seals to be squeezed out. In addition, with an excess, the level of combustion of additives and lubricant additives in the internal combustion engine cylinders will increase. All unburned elements will eventually reduce the efficiency of the catalyst, settling on its internal surfaces. The exact volume filled into the motor is indicated in technical guidance to the car. How much car owners pour into an internal combustion engine depends on the year of manufacture, as well as the modification of the vehicle. On average, 4.3 liters is enough to fill the engine.

Fluid level control is performed on a cold engine. Open the hood of the car and find the probe for diagnostics, it is installed in a special hole on the cylinder block. Take it out and wipe it with a cloth, then put it back in and pull it out again. Ideally, the fluid level should be between the Min and Max marks.

Possible causes of oil consumption

What factors affect the increased consumption of motor fluid:

1. Overflow of lubricant. This causes increased fluid flow. The ventilation system of the crankcase of the internal combustion engine will begin to squeeze out excess volume from the power unit.
2. Leakage of grease from irregularities, as well as places damaged by corrosion.
3. Constant operation of the car at high speeds, especially during the break-in of the power unit.
4. Fluid inconsistency in viscosity class. If this parameter is too high, the combustion of the lubricant will be slower.
5. Accelerated wear of the components of the power unit. Oil scraper caps fail, gaps may appear on the sleeve and valve stems. Piston rings wear out, etc.

The main reason for rapid consumption is usually liquid waste. The more pistons in the internal combustion engine, the faster the unit will eat oil.

According to experts, one overheating of the machine motor can cause the unit to start eating grease.

One of the biggest problems is leakage. Fluid can leave the lubrication system from under the valve cover, cylinder head gasket, filler seal, drain hole. Often, grease leaves from under the camshaft and crankshaft oil seals, oil filter, or oil pan gasket. Leaks can be identified by visual diagnostics. If it was not possible to identify the cause by eye, then most likely the engine is eating lubricant as a result of wear on the piston rings or valve stem seals.

Do-it-yourself lubricant change

You can replace consumables yourself, without the involvement of specialists.

Tools and materials

What is required to complete the task:

• fresh motor fluid;
• filtering device;
• drain plug with sealing ring;
• wrenches for 17 and 19;
• special tool for dismantling the oil filter;
• star key set.

You can learn more about replacing consumables and a filter device from a video shot by user Andrey Florida.

Stages of work

Changing the working fluid in the Hyundai Accent power unit is performed as follows:

1. Warm up the car engine. When the power unit reaches operating temperature, the viscosity characteristics of the lubricant decrease. The consumable becomes more liquid, which makes it easy to drain it from the motor.
2. Drive the Hyundai Accent into a garage with a pit or onto a flyover. Stop the engine and let it cool down for about 15 minutes.
3. Climb under the bottom of the car and find the drain plug. Waste fluid will come out of it. Substitute a container under the cork into which mining will merge. It can be an old bucket, a basin or a cut bottle. If the car is equipped with a pallet protection, it must be dismantled, to do this, unscrew all the bolts that fix it.
4. Unscrew the drain plug and wait until all consumables have exited the system.
5. Assess the condition of the drained consumable fluid. In the presence of serious dirt and deposits, as well as wear products, it is recommended to flush the power unit. Cleaning will require special remedy. Such oil can be bought at any auto shop. Screw in the drain plug and fill in the flushing agent through the filler neck, then start the engine and let it run. The time that the motor should run is indicated on the oil label. Drain the flushing agent from the lubrication system after cleaning.
6. Install a new plug in the drain hole with rubber seal.
7. Before pouring new fluid into the lubrication system, the filter device must be changed. Hyundai Accent can use two types of parts - replaceable and steel non-sectional. Replaceable filters are dismantled by unscrewing the screw located on the device case. When removing, it is recommended to visually inspect the replacement components. As for non-separable filters, they are unscrewed counterclockwise with a key. Remove the old part by unscrewing it counterclockwise. If problems arise during dismantling, use a special puller to remove it. This device is sold in any store. If you do not have a tool, you can use a piece of a bicycle chain by winding it around the filter housing. Alternatively, pierce the device with a screwdriver in a place closer to the bottom, away from the threads, so as not to damage the engine components. The tool will be used as a lever. Before installing a new filter, pour about 100-1500 grams of fresh oil into it and grease the gum near the thread with grease. Install the filter device, but do not overtighten it.
8. Unscrew the filler cap and fill the system with fresh grease. It is convenient to use a funnel to add liquid to the power unit. Fill in the required volume of consumables, regularly monitoring the fluid level in the lubrication system using a dipstick. After filling, start the engine of the machine for a few minutes, let it run for idling. Stop the engine and check the oil level again. Add oil if necessary. Reinstall the engine undertray.

If the car owner arrives at the Hyundai Accent in a timely manner, this will significantly extend the life of the engine, protect against serious breakdowns and prevent high repair costs. It is important not only to carry out this procedure on time, but also to select the oil itself in accordance with the characteristics of the operation of the machine and the requirements of the Korean automaker. Such work can be done by hand if the car is no longer under warranty. Therefore, most car owners prefer rather than seek help from a service station.

engine oil in Hyundai engine Accent should be replaced regularly.

Replacement frequency

To begin with, the driver must understand how often the Hyundai Accent is carried out. If you start only from the factory official manual, then there you will see figures of 10 - 15 thousand kilometers. But these are conditional indicators, since the actual interval between oil changes is actually much less. This is due to the fact that the manual indicates parameters focused on almost ideal operating conditions, mild climate and high-quality roads. In Russia, the replacement interval becomes shorter, since the following factors influence the condition of the lubricant and its physico-chemical properties:

• strong and sharp temperature changes between seasons;
• aggressive driving style;
• excessive regular engine loads;
• use of a towing device and a trailer;
• long idle time of the car in traffic jams;
• poor quality of roads;
• use of low-quality fuel;
• speeding, etc.

Therefore, the real interval between replacements of motor lubricants at Hyundai Accent is about 6-7 thousand kilometers, or once a year. The car owner himself must monitor the condition and level of oil, add it as needed or change it completely. Some breakdowns or malfunctions can even make the new oil unusable even after 500 - 1000 kilometers. Therefore, the driver is obliged to regularly monitor the serviceability of all Accent nodes. Experienced owners of Hyundai Accent cars advise, as far as possible and with very active use of the car, to change the lubricant in the engine every 6 months. This will allow the engine to run better and longer without serious problems and loss of engine life.

Oil selection

In the manual for the car of the Korean brand Hyundai Accent, the manufacturer recommends that they meet official requirements. The main emphasis in "Accent" is on the viscosity of the engine oil. It is optimal that the replacement be carried out using oils that correspond to the following values:

• 5W20;
• 5W30;
• 5W40.

The manual indicates such a sequence, so first look for 5W20, and if you can’t find such a composition, move along the list. The type of oil you choose will largely determine the performance of the motor.

Owners of cars of the sample around 2005 and 2007 complain that it is difficult to find branded grease with a viscosity of 5W20. Therefore, you have to select something from alternative offers on the market. Although the practice of Russian car owners clearly demonstrates that oil with an index of 5W30 is great for a Hyundai Accent car in our climate. With it, the car behaves confidently and does not suffer from temperature changes.

The manual contains a list of several well-known manufacturers of motor oils that the Korean company recommends to its Accent. These are the brands:

• Aral;
• Mannol;
• Liqui Moly.

These lubricants are recommended for over fresh cars equipped with new power units. Such compounds increase oxidation resistance, have a long service life and help save fuel. While the Accent is by no means a high mileage car, it's another nice little bonus. There are several oils that are not listed in the manual, but fully comply with all the requirements for Hyundai Accent engines:

• Crypto 3 manufactured by Midland;
• Magnatec C3 from Castrol;
• Super Tronic Long Life III by Aral;
• Helix Ultra Extra famous brand shell;
• Elf's Solaris LSX.

By pouring such oil into the engine, you will not violate the technological standards provided for by the Korean automaker. In general, Hyundai should be given credit, because it does not tie its motors to a strictly limited line of motor oils, but allows car owners of their cars to choose from a wide list of lubricants on the market.

Replacement instructions

Before in "Accent" manufactured by Hyundai, you will need to collect a minimum set of tools and materials. The list is small, which makes it possible for car owners, even with a limited number of tools, to independently maintain the car and replace consumables on it. To the list necessary materials and tools include:

• • fresh oil in accordance with the required characteristics;
  • an empty container where you will drain the used grease;

• new filter (or filter element);
• new drain plug;
• a pair of keys (17 and 19 sizes);
• filter puller;
• pit where work will be carried out;
• carrying lamp, if natural light not enough;
• rags;
• personal protective equipment (tight clothing, gloves, closed shoes).

When you have prepared and placed all the necessary tools near the car, you can get to work. The whole procedure can be conditionally divided into several stages:

• removal of old motor fluid;
• filter replacement;
• pouring new oil.

Let's go through them.

Draining old oil

Follow the instructions to avoid common mistakes or go the wrong way.

This completes the first stage. The mistake of many is that they simply forget or simply do not know about the need to replace the oil filter at the same time.

Filter

You will also need the container where you poured the mining, so do not remove it far. In the case of a filter, it is important to know in advance what type of device is installed on your Hyundai Accent car. Such machines are equipped with non-separable elements or those where only the filter element itself is subject to replacement. First of all, substitute the container for working out already under the filter. It is located on the left, near the top edge of the engine. A container is needed so that oil flows out there. Proceed further depending on the type of filter used.

If you have a non-separable design, then:

1. Take a puller or a wrench of the right size to unscrew the filter. It is dismantled by a counterclockwise movement.
2. Carefully clean the nest where the filter is inserted with a rag.
3. Compare your two filters. The old and new must be identical, otherwise some problems may occur.
4. The new filter has a sealing gasket, which must be lubricated with fresh engine fluid.
5. Install the element in place. Tight screwing by hand is usually sufficient. But the body can slip in the hands, so some people use the tool. The tightening should not be too strong, but even with a weak tension, smudges will occur through the seal.

That's it, we figured out the non-separable type of filtering device. Now about the features of the replaceable element in the filter housing. It works like this:

• dismantle the housing itself, drain the remaining engine oil into a container;
• clean the filter landing site, as in the previous case;
• now on the case find the fixing bolt of the cover, it must be unscrewed and removed;
• inside you will find a removable replaceable filter element;
• make sure that the new and old components are completely identical;
• insert it into place, change the rubber seal, screw the bolt into place and lubricate the gasket with oil;
• the housing together with the new filter element can be put back in place.

Everything is clear here. Nothing complicated. The main thing is that you do not accidentally damage the case itself or lose the mounting bolt. Even if it accidentally fell into a container with engine oil, do not rush to get it manually. The liquid is still hot, and you do not need extra burns. We proceed to fill in fresh motor lubricant.

fresh oil

Next, we need to pour the right amount of fresh oil into the crankcase. And here the logical question arises about how much engine oil is needed for the Hyundai Accent. According to the official manual, the Hyundai Accent engines contain 3 - 3.3 liters. It depends on the motor itself and its characteristics. But in practice, when self replacement the lubricating fluid in the engine is slightly less. The entire volume simply does not fit, since it is impossible to completely remove all the old liquid from the system.

Given this volume of oil in the Hyundai Accent engine, for the procedure it will be enough for you to take a 4-liter canister. The remaining lubricant is used in the process of topping up as needed, plus this will make it easier for you to find new oil for next shift consumables. There is a canister, all specifications are indicated, so finding an analogue is not difficult.

Fresh engine fluid is poured like this:

1. AT engine compartment You have already unscrewed the filler cap. Through it, fresh oil will be poured.
2. Pour first about 2.5 liters, let the oil drain into the crankcase. To do this, wait 5-10 minutes.
3. Use a dipstick to check the level of grease. If it's not enough, add a little more.
4. If the dipstick shows normal, close the cover, start the engine. While it is idling, check the drain plug and filter for leaks. If a leak is found, be sure to tighten all fasteners.
5. When the engine has warmed up, turn it off, take a control measurement. If the oil level meets the requirements, then all that remains is to put the plug back in place, install the pan protection and enjoy the result.

It is recommended to make another level measurement after 2-3 days, plus additionally study the condition of the floor under the car. The presence of even a small amount of fresh oil under the sump indicates that the tightness is broken, and it is necessary to tighten the filter or drain plug. On this, work on the independent replacement of engine oil in the Hyundai Accent engine can be considered completed, on which we congratulate you.

Thank you for your attention! See you soon!