Store service Dvizhok - online auto parts store

Great way to improve appearance your car is its tuning. Moreover, if the most expensive car is suitable for expensive car models, then for people like the VAZ 2107 you need to choose something cheaper. Tuning on a car that costs exactly the same as the cost of tuning it will look pretty ridiculous. That is why owners of modest VAZs prefer cheap option tuning - replacement of standard disks with alloy ones.

They distinguish the car from others and at the same time do not require large expenses. In addition, such tuning can be done independently.

The choice on the VAZ 2107 should be taken quite seriously, because by changing the disks, not only the appearance of the car will change, but also its driving performance. Diameter alloy wheels should not be too large, here the best option is R13 and R14, in extreme cases R15, but no more. For a larger diameter, it will be necessary to modify the wings of the car and its suspension, and this requires certain financial costs. In addition, the consumption of gasoline with huge disks will be an order of magnitude greater than usual. Another criterion for the selection and installation of alloy wheels on the VAZ 2107 is their offset width. The greater the width, the faster the suspension and bearings of the car will go out of service. In addition, if the width is too large, the outer side of the wheel will protrude beyond the mudguard, which means that dirt will fall from the wheels to the outside of the car. The most optimal departure width ranges from 33 and 35 millimeters.

In addition, the more standard the configuration of an alloy wheel, the easier it is to choose tires for it. A very important criterion when choosing wheels is how much is required to mount the wheel and at what distance they need to be mounted. Each cast disk for the VAZ 2107 has its own specific configuration. For example, PSD 4x98, means that 4 bolts are required to install the tire and they need to be located on a diameter of 98 millimeters. In addition, you should buy elongated bolts, since the old bolts from standard VAZ wheels may turn out to be short.

It's safe to say that rims have always been a "stumbling block" for many owners. On the one hand, stamped standard wheels are quite cheap, unpretentious and durable, the right size of wheels is always on sale, both R13 and R14 can be bought without even leaving the regional center.

But it is worth at least somehow changing the appearance of the car, repainting the body, carrying out minimal tuning- and the desire to "put the casting" increases exponentially. In addition to beauty, fuel economy alloy wheels allow the owner to make a serious argument in favor of choosing the VAZ 2107 and even brag a little to the audience: they say, “I could buy a foreign car a long time ago, but as a patriot, you know, I put the central lock, casting, and continue to respect our auto industry.”

So, about the rims in order.

Wheel functions

• The disks transmit torque to the bus of the drive pair.
• The discs contribute to the uniform compaction of the tire along the entire length of its circumference, or around the perimeter.
• The disc ensures the correct location of the tire in the suspension, providing all the rigidity of the structure.

Discs are different, both in width and in diameter, (R 13, R 14, for the classics) by weight, by the number of holes for fasteners.

First of all, according to the production method, discs are stamped and cast. And the first question of a beginner “what disks to install” implies exactly the answer to this question. He is not so simple. Let's see why.

stamped discs

Their advantages are unpretentiousness, low cost, high wear resistance, as well as ductility. This means that if it falls into the pit, the disc can be crushed, but not split or broken. A bent disc is easy to straighten even with an ordinary hammer. Stamped rims are so cheap that cars don't take them off at night.

As for the shortcomings, the most important is a lot of weight, which affects acceleration, braking and inertia. The result is poor handling and higher fuel consumption. In addition, from a purely aesthetic point of view, all cars have the same face. Rust can also be a disadvantage, as factory paint is usually short-lived. Also, stamping should be well washed in spring and autumn, in order to avoid unnecessary noise and salt corrosion.

Alloy wheels

Casting is fashionable, cool, modern. In addition, such discs can be 20-30% lighter than stamped discs, because they are made from an alloy of light metals, they are less susceptible to corrosion, and more durable. The very technology of casting under low pressure increases the strength of products.

Outwardly, alloy wheels have an individual look, there are design bureaus that produce new forms and follow fashion.

Functionally, the ride on alloy wheels is smoother, acceleration is improved, and fuel consumption is lower.

But there is also a “reverse side of the coin”. The disadvantage of alloy wheels is the continuation of their advantages. That is, when it enters the pit, the cast disk does not wrinkle like a stamped one. But under supercritical load, it simply bursts, splits - and its place is in the alloy processing shop, or in the trash.

This is due to the fragility of the disk. In addition, the casting cost is higher and the service life is shorter. An important disadvantage is the transmission of all shocks to the suspension, since the disk cannot absorb them with its own deformation. Therefore, before deciding which wheels to install, decide where and why you will drive a car.

When choosing a disc, the most important thing should be their compliance with the car model. So, installing disks under a low profile will not suit summer residents, and installing heavy and durable disks will not save on fuel consumption. If you missed the choice of size, then the wheel on the corners can “short” the fender liner, or, which is completely offensive, cannot be installed at all.

What quantitative parameters do standard disks for the classic VAZ 2107 have?

More complete labeling, thus, looks like 5x13, or 5.5x13.

In simpler terms, if the offset is positive, then it will seem that the disk is immersed, or "drowned" in the arch.

If the overhang is negative, then it will seem that the disk itself protrudes from the wheel arch, and the seat of the disk itself is recessed deep enough.

For all VAZ classics standard reach is +29 mm.

If you don’t know which offset you should get, then the Leninist rule “better less is better” is perfect here, since if the offset is too large, the wheel can rest against the fender liner, despite the correctly selected radius. The standard deviation is about 5 mm on either side, so for the VAZ 2107 it will be from +24 to +34 mm. At the same time, it must be remembered that this parameter only works for a certain width of the disk, if you want to install wide disks, then you need a smaller overhang and vice versa.

• Wheel bolts must be M12 with a diameter of 1.25 mm. Standard drilling is designed for this size.
• In case of wheel installation bigger size R 14 instead of the stock R 13 will have to install a lower profile tires, such as 55-60 mm, because there is "less room" on the tire. The limit of love for a low profile can be the following photo. Before deciding on such a bold act, you need to understand that leaving the center of a large city is categorically contraindicated for such a car.

In conclusion, I would like to say that a compromise can be winter tires for stamping, and a summer kit for casting, for beauty lovers. And for lovers of benefits - on the contrary, since fuel consumption is higher in winter, and the chance of getting into a pit is less than in summer. In addition, there are fewer out-of-town trips in winter, and the roads there are smoother than in summer.

Wheels are always of great interest. Stamped can always be bought at any auto shop. Their reliability and durability is time-tested. However, it is only necessary to slightly change the appearance of the car, and you no longer want to go back to such models. There is a desire to install alloy wheels for the VAZ 2107. They have a positive effect on fuel consumption, make the trip more comfortable and safe.

Functionality of rims

In front-wheel drive cars, with the help of a disk, revolutions are transmitted to the drive pair. The cover sits tight on it. The front suspension becomes stiffer due to the correct positioning of the tire.

Wheels for a VAZ 2107 car are available in several versions. They differ in certain parameters:

• Width.
• diameter.
• Mass.
• Number of mounting holes.

It is allowed to install disks of size R13, R14 on any VAZ 2107 car. According to the production method, it can be both stamping and casting.

Beginners always ask the question, which discs are better to put on a seven? It will not be possible to answer it in one sentence. Each type has its own advantages and disadvantages.

stamped

Main advantages:

• Low cost.
• Unpretentiousness.
• Excellent wear resistance.
• Plastic.

Stamping, falling into the pit, does not break or crack, only creases. You can straighten the dent with a regular hammer.

The main disadvantage, perhaps, can be called a large mass. Because of this, the car accelerates for a long time, it has a large inertia, increases braking distances. All these qualities affect the controllability of the car, increase fuel consumption.

If we looked at the stamped wheels on the VAZ 2107 from the point of view of aesthetics, we can see that they all look the same.

The factory coating is usually of poor quality, so the paint quickly begins to fly off and the surface becomes rusty. So that the stamping does not make noise, does not corrode with salt, it must be constantly washed.

cast

Today the best discs on the VAZ 2107, cast products are considered. They have recently become fashionable and quickly gained great popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts.

Alloy wheels are highly durable and almost never rust. In addition, their appearance has many differences. Designers are engaged in the aesthetics of the product, giving it an original look.

If we consider cast models in terms of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• soft movement,
• Reducing fuel consumption.

For all their merits, alloy wheels are not without negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. These parts are not repairable.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter.

Any shock is transferred to the suspension, since alloy wheels cannot absorb external influences with their own deformation. Which discs to put on the VAZ 2107, each driver decides individually, taking into account future operating conditions.

When choosing, it is very important to consider the model of the car. For example, wheels for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption.

Wheel sizes VAZ 2107

Four mounting bolts are used to fasten the products. The holes for them are located in a circle with a diameter of 98 millimeters. For bolts, holes with a diameter of 12.5 millimeters are drilled.

In order for the disc to be freely placed on the hub, a central hole with a diameter of 58.5 millimeters is made in it. It is along this hole that its orientation occurs. The bolts only press the flange against it.

When installing an alloy wheel, you may need to use an adapter ring. Sometimes without such an additional part it is impossible to create an exact alignment of the hub and the surface of the disk. The ring can be freely bought at any auto shop.

Removal, or departure of the disk on the VAZ 2107 is usually equal to 29 millimeters. This term refers to the distance formed between the mating surface of the disk after installation on the hub, with a conditional plane passing through the center of the disk rim.

That is, when the offset is positive, it seems that the element has gone deep into the arch. With a negative value, it seems to come out of the arch, it seems that it is too deeply recessed in the seat.

Experts advise to make a flight within the normal range. If the overhang is too high, the wheel may begin to touch the fender liner. It is allowed to withstand a deviation of 5 millimeters in any direction. In other words, on the VAZ 2107, the departure can be in the range of +24 - +34 mm.

Moreover, this parameter is designed only for a specific disk width. To fit a wider model, it is necessary to withstand a smaller overhang.

Wheel functions

stamped discs

Alloy wheels

7vaz.ru

Wheels are always of great interest. Stamped can always be bought at any auto shop. Their reliability and durability is time-tested. However, it is only necessary to slightly change the appearance of the car, and you no longer want to go back to such models. There is a desire to install alloy wheels for the VAZ 2107. They have a positive effect on fuel consumption, make the trip more comfortable and safe.

Functionality of rims

In front-wheel drive cars, with the help of a disk, revolutions are transmitted to the drive pair. The cover sits tight on it. The front suspension becomes stiffer due to the correct positioning of the tire.

Wheels for a VAZ 2107 car are available in several versions. They differ in certain parameters:

• Width.
• diameter.
• Mass.
• Number of mounting holes.

It is allowed to install disks of size R13, R14 on any VAZ 2107 car. According to the production method, it can be both stamping and casting.

Beginners always ask the question, which discs are better to put on a seven? It will not be possible to answer it in one sentence. Each type has its own advantages and disadvantages.

stamped

Main advantages:

• Low cost.
• Unpretentiousness.
• Excellent wear resistance.
• Plastic.

Stamping, falling into the pit, does not break or crack, only creases. You can straighten the dent with a regular hammer.

The main disadvantage, perhaps, can be called a large mass. Because of this, the car accelerates for a long time, it has a large inertia, and the braking distance increases. All these qualities affect the controllability of the car, increase fuel consumption.

If we looked at the stamped wheels on the VAZ 2107 from the point of view of aesthetics, we can see that they all look the same. The factory coating is usually of poor quality, so the paint quickly begins to fly off and the surface becomes rusty. So that the stamping does not make noise, does not corrode with salt, it must be constantly washed.

cast

Today, cast products are considered the best disks on the VAZ 2107. They have recently become fashionable and quickly gained great popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts.

Alloy wheels are highly durable and almost never rust. In addition, their appearance has many differences. Designers are engaged in the aesthetics of the product, giving it an original look.

If we consider cast models in terms of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• soft movement,
• Reducing fuel consumption.

With all their advantages, alloy wheels are not without negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. These parts are not repairable.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter. Any shock is transferred to the suspension, since alloy wheels cannot absorb external influences with their own deformation. Which discs to put on the VAZ 2107, each driver decides individually, taking into account future operating conditions.

When choosing, it is very important to consider the model of the car. For example, wheels for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption.

Wheel sizes VAZ 2107

Four mounting bolts are used to fasten the products. The holes for them are located in a circle with a diameter of 98 millimeters. For bolts, holes with a diameter of 12.5 millimeters are drilled.

In order for the disc to be freely placed on the hub, a central hole with a diameter of 58.5 millimeters is made in it. It is along this hole that its orientation occurs. The bolts only press the flange against it.

When installing an alloy wheel, you may need to use an adapter ring. Sometimes without such an additional part it is impossible to create an exact alignment of the hub and the surface of the disk. The ring can be freely bought at any auto shop.

Removal, or departure of the disk on the VAZ 2107 is usually equal to 29 millimeters. This term refers to the distance formed between the mating surface of the disk after installation on the hub, with a conditional plane passing through the center of the disk rim.

That is, when the offset is positive, it seems that the element has gone deep into the arch. With a negative value, it seems to come out of the arch, it seems that it is too deeply recessed in the seat.

Experts advise to make a flight within the normal range. If the overhang is too high, the wheel may begin to touch the fender liner. It is allowed to withstand a deviation of 5 millimeters in any direction. In other words, on the VAZ 2107, the departure can be in the range of +24 - +34 mm.

Moreover, this parameter is designed only for a specific disk width. To fit a wider model, it is necessary to withstand a smaller overhang.

Car-Fix - car dent removal kit. The unique patented clip shape eliminates additional damage, and the adhesive can be easily removed after the dents are removed.

The Windshield Repair Kit is designed specifically for self repair cracks on windshield. A characteristic feature of this adhesive is its amazingly low viscosity, very close to the viscosity of water. Due to this, it easily fills the crack under the action of capillary forces.

kolesadom.ru

The size of tires and wheels, or how to understand the markings. Disc size for vaz 2107

cast, stamped (photo and video)

It's safe to say that rims have always been a "stumbling block" for many owners. On the one hand, stamped standard wheels are quite cheap, unpretentious and durable, the right size of wheels is always on sale, both R13 and R14 can be bought without even leaving the regional center.

But it is worth at least somehow changing the appearance of the car, repainting the body, carrying out minimal tuning - and the desire to “install casting” increases exponentially. In addition to beauty, fuel economy, alloy wheels allow the owner to make a serious argument in favor of choosing the VAZ 2107 and even brag a little to the audience: they say, “I could buy a foreign car a long time ago, but as a patriot, you know, I put the central lock, casting, and continue to respect our auto industry.

So, about the rims in order.

Wheel functions

• The disks transmit torque to the bus of the drive pair.
• The discs contribute to the uniform compaction of the tire along the entire length of its circumference, or around the perimeter.
• The disc ensures the correct location of the tire in the suspension, providing all the rigidity of the structure.

Discs are different, both in width and in diameter, (R 13, R 14, for the classics) by weight, by the number of holes for fasteners.

First of all, according to the production method, discs are stamped and cast. And the first question of a beginner “what disks to install” implies exactly the answer to this question. He is not so simple. Let's see why.

stamped discs

Their advantages are unpretentiousness, low cost, high wear resistance, as well as ductility. This means that if it falls into the pit, the disc can be crushed, but not split or broken. A bent disc is easy to straighten even with an ordinary hammer. Stamped rims are so cheap that cars don't take them off at night.

As for the shortcomings, the most important is a lot of weight, which affects acceleration, braking and inertia. The result is poor handling and higher fuel consumption. In addition, from a purely aesthetic point of view, all cars have the same face. Rust can also be a disadvantage, as factory paint is usually short-lived. Also, stamping should be well washed in spring and autumn, in order to avoid unnecessary noise and salt corrosion.

Alloy wheels

Casting is fashionable, cool, modern. In addition, such discs can be 20-30% lighter than stamped discs, because they are made from an alloy of light metals, they are less susceptible to corrosion, and more durable. The very technology of casting under low pressure increases the strength of products.

Outwardly, alloy wheels have an individual look, there are design bureaus that produce new forms and follow fashion.

Functionally, the ride on alloy wheels is smoother, acceleration is improved, and fuel consumption is lower.

But there is also a “reverse side of the coin”. The disadvantage of alloy wheels is the continuation of their advantages. That is, when it enters the pit, the cast disk does not wrinkle like a stamped one. But under supercritical load, it simply bursts, splits - and its place is in the alloy processing shop, or in the trash.

This is due to the fragility of the disk. In addition, the casting cost is higher and the service life is shorter. An important disadvantage is the transmission of all shocks to the suspension, since the disk cannot absorb them with its own deformation. Therefore, before deciding which wheels to install, decide where and why you will drive a car.

When choosing a disc, the most important thing should be their compliance with the car model. So, installing disks under a low profile will not suit summer residents, and installing heavy and durable disks will not save on fuel consumption. If you missed the choice of size, then the wheel on the corners can “short” the fender liner, or, which is completely offensive, cannot be installed at all.

What quantitative parameters do standard disks for the classic VAZ 2107 have?

• There are 4 holes for mounting bolts, the diameter of the circle (more precisely, the diameter of the circle on which the holes are located is 98mm. Sometimes this is referred to as (LZ * PCD): 4 * 98. This means that between two diametrically opposite holes 98 mm.
• Bolt drilling is characterized not only by the size between the holes, but also by the diameter of the holes themselves. In the case of the VAZ 2107, this is 12.5 mm. Drilling holes is a parameter that is not immediately paid attention to, as always, at first admiring the “size”. And in vain. It must be remembered that the manufacturer of the disks is obliged to very accurately calculate the fixation of the wheel to the hub, since the minimum mismatch between the centers of the disk and the hub causes dangerous beats that can eventually tear off the wheel. Drilling must be done with an accuracy of tenths of a millimeter.
• The disk is designed for a hub with a diameter central hole 58.5 mm. The size of the hub is indicated as follows: (DIA 58.5). The fact is that ordinary and solid-looking wheel bolts do not center the wheel to the hub at all, as mentioned above. They just firmly connect the flange and the disc. It is the central hole in the disk that helps to correctly orient the disk, and hence the wheel relative to the hub. If you decide to purchase alloy wheels, then remember that you may need to use an adapter ring for accurate alignment, which are sold quite freely in large stores.
• The diameter of the disks for the VAZ 2107 should be within 13-15 inches, and they are designated as R 13-R Regular size- 13 inches. This dimension refers to the diameter of the disc rim.
• The width of the disk (more precisely, the width of the disk rim) in inches for the VAZ 2107 is from 5 to 6 inches. Few people pay attention to this parameter, since they first of all look at the diameter. But it is the width that affects the stability of the entire tire, and therefore reliability.

A more complete marking, therefore, looks like 5x13, or 5.5x13.

• Wheel offset is from 15 to 30 mm. Let's talk about this parameter in more detail, since its meaning is not explained everywhere. Strictly speaking, offset is the distance between the mating plane on the disk when the disk is placed to the hub and a special, conditional plane that runs along the very middle of the rim on the disk.

In simpler terms, if the offset is positive, then it will seem that the disk is immersed, or "drowned" in the arch.

If the overhang is negative, then it will seem that the disk itself protrudes from the wheel arch, and the seat of the disk itself is recessed deep enough.

For all VAZ classics, the standard offset is +29 mm.

If you don’t know which offset you should get, then the Leninist rule “better less is better” is perfect here, since if the offset is too large, the wheel can rest against the fender liner, despite the correctly selected radius. The standard deviation is about 5 mm on either side, so for the VAZ 2107 it will be from +24 to +34 mm. At the same time, it must be remembered that this parameter only works for a certain width of the disk, if you want to install wide disks, then you need a smaller overhang and vice versa.

• Wheel bolts must be M12 with a diameter of 1.25 mm. Standard drilling is designed for this size.
• If you fit a larger R 14 wheel, instead of the stock R 13, you will have to install a lower tire profile, such as 55-60 mm, because there will be “less space” on the tire. The limit of love for a low profile can be the following photo. Before deciding on such a bold act, you need to understand that leaving the center of a large city is categorically contraindicated for such a car.

In conclusion, I would like to say that a compromise can be winter tires on stamping, and a summer kit on casting, for beauty lovers. And for lovers of benefits - on the contrary, since fuel consumption is higher in winter, and the chance of getting into a pit is less than in summer. In addition, there are fewer out-of-town trips in winter, and the roads there are smoother than in summer.

You might be interested:

What disks to put on the VAZ 2107 along the radius, cast or stamping

Renumax is a unique scratch remover! Don't waste your money on a repaint! Now you can remove any scratch from the car body in just 5 seconds.

Revolutionary product from Japanese company Wilsson Silane Guard is an innovative water-repellent coating that gives the car body a radiant shine for up to 1 year.

Wheels are always of great interest. Stamped can always be bought at any auto shop. Their reliability and durability is time-tested. However, one has only to slightly change the appearance of the car, and go back to such

website

Tires and wheels for VAZ 2107, wheel size for Lada 2107

Tires and wheels for VAZ 2107Other models of VAZ: VAZ 110, VAZ 1111, VAZ 1111 Oka, VAZ 2101, VAZ 2102, VAZ 2103, VAZ 2104, VAZ 2105, VAZ 2106, VAZ 2107, VAZ 2108, VAZ 2109, VAZ 21099, VAZ 2110, VAZ 2111, VAZ 2112, VAZ 2113, VAZ 2114, VAZ 2115, VAZ 2120 Nadezhda, VAZ 2121 Niva, VAZ 2123, VAZ 2131 Niva, VAZ 2131 Niva, VAZ 4X4, VAZ Classics, VAZ Granta, VAZ Kalina, VAZ Priora , VAZ Samara, VAZ Vesta, VAZ XRAY, VAZ Largus, PCD 4x98 diameter from 13 to 13, width from 5 to 5 and profile from ET29 to ET29 like Lada 1200 Tire dimensions from to, width from to and profile from to. Minimum tire size: 165/70R13, maximum: Selection of tires and wheels for the car VAZ 2107 Using the automatic selection of tires and wheels for the VAZ 2107, you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. The fact is that tires and rims have a significant impact on most major performance characteristics vehicle. In addition, one cannot fail to note the importance of tires and rims as elements active safety. That is why it is extremely important to approach their choice very responsibly, using rather specific knowledge about these products for this. Unfortunately, or, conversely, fortunately, a significant part of motorists prefer not to study technical device own car thoroughly. Fully automatic system selection in this case is perhaps the only way to avoid the wrong choice when buying tires and rims. And it is very wide, which is due to the diversity of the range of such products presented in the Mosavtoshina online store.

mosautoshina.ru

The size of tires and wheels, or how to understand the markings | Classics Club VAZ-2107, VAZ 2106

SO LET'S CONSIDER THE TIRES:

Additional indexes:

C - indicates that the tire belongs to the category of reinforced M + S - (Mud + Snow - mud plus snow) - winter or all-weather tires. TL - tubeless tire TT - tube tire

Tires often indicate the production date in the format week.year. For example, 3006 is the thirtieth week of 2006.

Speed ​​index values

Index Speed, km/hI.............100K.............110L...... ..............120M.................130N.................. 140P...................150Q..............160R.......... ........170S.............180T.............190H... ...............200V.............210VR............... ...210 - 240ZR.............over 240

Load index values

Index Load, kg Index Load, kg60........ 250............. 90........ 60061........ 257. ............ 91........ 61562........ 265............. 92..... ... 63063........ 272............ 93........ 65064........ 280..... ........ 94 ........ 67065 ........ 290 ......... 95 ........ 69066 ........ 300............. 96........ 71067........ 307......... .... 97........ 73068........ 315............. 98........ 75069.... .... 325............. 99........ 77570........ 335............. 100......80071........ 345............. 101.......82572........ 355. ............ 102......85073........ 365............. 103...... .87574........ 375............. 104.......90075........ 387........ ..... 105.......92576........ 400............. 106.......95077..... ... 412............. 107.......97578........ 425............. 108. ......100079........ 437............. 109.......103080........ 450... .......... 110.......106081........ 462............. 111.......109082 ........ 475............. 112.......112083.. ...... 487............. 113.......115084........ 500............ .114......118085........515............115.......121586........530 .............. 116......125087........ 545............. 117..... ..128588........ 560............. 118.......132089........ 580....... ...... 119 ....... 1360

Example: 5.5J * 13 ET38 4x98 D58.6

5.5 - rim width, indicated in inches 13 - rim diameter, indicated in inches ET - offset, i.e. distance from the central axis of symmetry of the disk to the plane of contact between the disk and the hub (mm)4 - the number of mounting holes the number of bolts (PCD) on which the disk is attached (pcs) 98 - the mounting diameter of the mounting bolts (mm) D58.6 - the diameter of the central hole of the disk (mm)

Humps - annular protrusions along the edges of the rim, designed for tubeless tires. The main purpose of the humps is to securely fix the tire bead in turns in order to prevent depressurization of the wheel. Humps are ordinary (indicated by "H") and truncated (indicated by "X"). In case on rim there are no humps, tubeless tires are not recommended and can be life threatening.

www.semerkainfo.ru

Wheels on the VAZ 2107, selection and installation of alloy wheels (Video)

The choice of disks for the VAZ 2107 has always been the subject of a dispute among car owners. Stamped discs are cheap, durable, low maintenance and available at any auto shop. But it’s worth trying to improve the appearance of the car, the first thing you want to do is install cast or other alloy wheels on the VAZ 2107.

Therefore, the issue of choosing disks is worthy of detailed consideration.

Wheel disks for VAZ 2107

Wheels, light alloy (cast, forged, prefabricated) or stamped, perform the same functions:

• transmission of torque to the tires of the drive wheels;
• ensuring uniform compaction of the tire around the circumference;
• ensuring the rigidity of the structure and the correct location of the tires in the suspension.

The “classic” uses 13-inch alloy and stamped wheels for four mounting bolts. As tuning, 14-inch wheels can be installed.

Advantages of stamped discs:

The disadvantage of stamped discs is a lot of weight. The more unsprung mass, the faster the suspension collapses and the worse the handling on a bad road. In this regard, stamped wheels are much inferior to alloy wheels. The second disadvantage is the susceptibility to corrosion, which is why they need to be periodically cleaned and tinted.

Advantages of alloy wheels:

Disadvantages of alloy wheels on the VAZ 2107:

• A brittle material that does not bend, but breaks with a strong impact. If the disc does not break with a strong blow, it still does not bend. Therefore, rubber on alloy wheels has a much higher chance of damage if it gets into a pit.
• Shorter service life than stamped steel discs.
• High price and attractive to thieves.

The high price of light alloy wheels makes you responsibly take their selection.

Types of alloy wheels

According to the production method, alloy wheels are divided into three types:

• Cast - made by casting from an alloy based on aluminum or magnesium. The last option is more expensive. The physical characteristics of alloy wheels differ depending on the alloy used. Accordingly, the price is different. The weight of cast wheels is one third less than that of steel ones. They look better, but the high brittleness of the material often causes chips when hitting the edge of a burly pit.

• Forged differ from cast production technology. Hot stamping allows for a lighter weight and greater strength of the part than casting. Also, these discs are less fragile, which increases their durability. The impact force to deform a forged wheel is much greater than that of a steel wheel. Therefore, with strong impacts, more loads fall on the suspension of the car.

• Prefabricated, assembled from spirit-three parts with the help of bolts. Parts of the prefabricated disk are made using different technologies. For example, the rim is forged, the disc is cast. This approach reduces the weight of the disk and increases maintainability. Prefabricated discs can be 2-3 times lighter than cast ones. When choosing a prefabricated disk, you should pay attention to the material of the bolts. They must be titanium. Steel bolts are subject to corrosion, which worsens the appearance and parameters of the disk.

Selection of alloy wheels

Wheels on the VAZ 2107 must correspond to the primary use of the car. Low-profile wheels are not suitable for driving on a bad road, if you need good handling at high speed, high profile would not be the best choice.

Compliance is key geometric dimensions drive parameters of the vehicle.

• The regular size of the disk of the "classic" VAZ is 13 inches. Alloy wheels can be installed on 13, 14 and 15 inches. But it should be noted that with a larger disc diameter, a lower tire profile should be used. Otherwise, the wheel will rub or not enter the wheel arch at all. Please note. That low-profile tires will be especially easily damaged if they hit a pothole in the pavement.

• Wheels that are too wide (more than 30 mm offset) will provide better traction, but tire edges that constantly protrude due to mudguards will cause severe dirt on the sides of the car. Also, a wide wheel can touch the fender liner.

• Regular VAZ wheels have four holes for mounting bolts. The diameter of the circle on which they are placed is 98 mm. In other words, between a pair of diametrically opposed holes, the distance is 98 mm.
• Hole diameter - 12.5 mm. This is important parameter, since in large holes the bolts will hang out, in smaller ones they will not crawl through.
• The diameter of the inner hole of the disc corresponds to the diameter of the hub - 58.5 mm. It is with its help, and not with bolts, that the disk is centered. Therefore, discs with a smaller hole will not fit on the machine, with a larger one, they will require the installation of an additional centering ring.

When choosing optimal size disks, you can use the selection service, which is available on many sites of online stores of tires and disks.

Installation of alloy wheels on the VAZ 2107

Alloy wheels are installed in the same way as stamped ones. Difficulties can arise if the diameter or overhang of the disc is very different from the standard. In this case, you will have to change the shape of the wheel arches and wings so that the wheel does not rub when cornering or while driving. Such alterations are very time-consuming and expensive, so you should think before you decide to install disks. custom sizes on VAZ 2107.

semerkavaz.ru

Dimensions of wheels, tires and disks VAZ 2107 2002

Highlighted entries mean factory sizes, the rest are replacement options

VAZ 2107 2002 1.5i

VAZ 2107 2002 1.5i

Generation: 1982 .. 2012 Power: 67 hp | 50.0 kW | 68 PSEngine: I4, gasolineCenter hole diameter: 60.5 mmThread: M12 x 1.25Mount type: boltYears of production: 2002–2006

VAZ 2107 2002 1.6

Generation: 1982 .. 2012 Power: 74 hp | 55.2 kW | 75 PSEngine: I4, gasolineCenter hole diameter: 60.5 mmThread: M12 x 1.25Mount type: boltYears of production: 1982–2006

VAZ 2107 2002 1.6i

Generation: 1982 .. 2012 Power: 73 hp | 54.4 kW | 74 PSEngine: I4, gasolineCenter hole diameter: 60.5 mmThread: M12 x 1.25Mount type: boltYears of production: 2002–2012

VAZ 2107 2002 1.7i

Generation: 1982 .. 2012 Power: 79 hp | 58.8 kW | 80 PSEngine: I4, gasolineCenter hole diameter: 60.5 mmThread: M12 x 1.25Mount type: boltYears of production: 1991–2003

It is inexpensive to buy alloy wheels for VAZ 2101–2107 cars at the SINSERVICE company. We also offer to use our tire service and install tires on wheels purchased from us. All products and services provided are guaranteed.

The catalog contains over 30 models of products of various colors and configurations. In a special electronic form, you can set the required width, profile, diameter and other parameters for a comfortable and quick search.

How to order wheels for VAZ 2101-2107 in our online store?

• Click the "Buy" button next to the model you like.
• In the window that appears, select "Checkout". If you need several models at once, then click "Continue shopping".
• Once again check the conformity of the model and size, as well as the correctness of the specified number of VAZ 2101-2107 disks, then click the "Continue registration" button.
• Specify the purchase method.
• Please provide the full name or details of the organization (if the buyer - entity) and contact details.
• Confirm your order.

If necessary, you can use the advice of our managers, who will recommend the best model or provide more detailed information. By contacting us, you get the opportunity to buy high-quality wheels for VAZ 2101–2107 without overpayments!