home

TCM diesel loaders

TCM has upgraded diesel forklifts load capacity 1.0-3.0 tons in its tradition - using high technology and the heritage of many years and many-sided experience in the production of loaders. Pursuing the corporate policy of stepping forward in the rapidly changing truck environment, TCM has redesigned this series of trucks to further improve their performance, more powerful engine, easier to operate and more reliable.

high power engine (Displacement 3300 cc)

increased maneuverability (Modern design of the accelerator pedal, electric ignition handle)

increased safety (seat equipped with side mounting, improved visibility ahead of the operator)

increased reliability (improved engine cooling system, aluminum radiator, increased air intake to the engine)

Comfort and ease of use forklifts are very important for operators who work continuously for several hours. Ergonomically designed pedals and levers provide maximum operator comfort.

These features contribute to ease of operation even for inexperienced operators, significantly reducing fatigue levels.

High-power KUBOTA V3300 engine for loaders with a capacity of 2.0 - 3.0 tons. Volume 3318 cu. see Rated power 50.0KW (67 hp) / 2500 rpm. in a minute. The maximum torque has been increased by 10% compared to previous models. 226.4 N-m(23.1 kg-m)/1800 rpm

Upgraded diesel engine С240 l/p 1 ton. Rated power 38.3kw (52 hp)/2500 rpm

Improved petrol engine. Torque increased by 10% Idling. 50A higher power generator compared to previous 35A models. Cooling system with more powerful fans.

More comfortable to drive; modern design brake and accelerator pedals, namely 20% less effort on the brake pedal, 50% less vibration of the brake pedal, equipped with a footrest. Combined light and turn signal switch handle with mechanism automatic shutdown at the end of the turn. Models with automatic transmission equipped with an electric ignition lever in addition to the conventional ignition key. More roomy fuel tank 70 liters for models with a capacity of 2-3 tons, 50 liters for models with a capacity of 1-1.8 tons. Easy to open hood with one push.

More safe. Increased visibility ahead of the operator by 15% on loaders with a capacity of 2-3 tons equipped with a standard mast. 30% larger lift and lower footboard for cab entry, operator seat equipped with seat belt, shockless lift cylinder reduces noise and softens impact when the forks touch the ground, the parking brake handle is equipped with a safety lock. The new models are equipped with a special air intake, which greatly improved the cooling system, an upgraded aluminum radiator, a larger engine air intake, which helps to increase the service life of the loader. Optional equipment - exhaust pipe for diesel models equipped special device that captures the black smog emitted by the diesel engine. These emissions are automatically incinerated.

Loader Specifications See Table

Diesel forklifts, gasoline forklifts (load capacity from 2.0 to 10.0 tons)

The best loaders in your class. Convenient in work, easily serviced and small-sized. The main feature of this series is: high lifting and lowering speed, high mast with wide view and reliable powerful motors. TCM loaders of this series are superior to all analogues existing today with a carrying capacity of 2.0 - 10 tons.

Standard equipment for TCM loaders

Wide view lift

ITA class 2 chassis

Fork length 1070 mm

Durable J-Lag tires

Power steering

protective roof

Suspension seat

towing device

Air filter cyclone type

Parking brake with safety lock

Fork lift and mast tilt control knob

2-Stage Pressure Relief Valve Control Valve

Oil level indicator in the hydraulic system

Transmission oil gauge

Return filter in the hydraulic system

Oil filter in the transmission system

Weight control valve

Lift Circuit Shutoff Valve

Mast tilt lock valve

Halogen headlights

Rear combination lamps

Rearview mirror

Sound signal reversing

Reversing light

electric horn

High quality rug

Protective roof tarpaulin

Cylindrical roof pillar

Air intake system located above the driver's head

Extended radiator tank

Angle-adjustable steering column

Asbestos free brakes

Turn signal lights

Water separator (D)

Power brakes

Hour meter

Water temperature indicator

Fuel gauge

Hand vise

Operator tool kit

Additional cargo equipment for installation on a TCM loader

VFM 2-stage mast with free travel and wide visibility

3-stage VFHM mast with free travel and wide visibility

Lifting fork carriage

long fork

Extended fork attachments

Sideshift fork

Mounted fork carriage

Forklift

Bale grab

Rotating bale grab

Paper roll gripper

Block gripper

Rotating forks

crane handle

Drum pin

TCM Loader Features See Table

Acroba is a new series of loaders. Distinctive design feature loader is that it can move perpendicular to its longitudinal axis. . This feature is especially useful for serving rooms with limited space. The following should also be noted as main advantages: zero turning radius, articulated driver's seat for easier and safe management, and 2x2 HST system, which provides movement without slipping. Switching between normal and lateral movement is done in 3 seconds using a lever. In addition, the loader is able to stack loads in the corners of heavily cluttered premises. Overall warehousing efficiency increased by 10-30%.

Ergonomics of forklifts

To reduce operator fatigue, the loader is equipped with a 450 rotation operator seat. This allows the operator to use an additional accelerator and reduce the need to turn the body when moving backward. With the 450 degree rotation of the chair, excellent rear visibility is provided. Reducing operator fatigue when moving backwards by approximately 30-60%. To facilitate the work of the operator, all levers and the steering wheel are equipped with servo amplifiers.

Easy start and normal movement of the loader on rough roads

The series realizes easier starting and driving with a heavy-duty propulsion system where conventional propulsion drives show unexpected and unstable results.
Low noise and vibration.
The innovative motion system provides a significant reduction in vibration and noise levels. In addition, the total number of its elements has been reduced to 100, which facilitates maintenance.

Diesel forklifts (capacity from 11.5 to 42.0 tons)

TCM Diesel Forklifts large capacity are used when loading sea containers, steel and wood products and other heavy goods. These machines feature low noise (85 dB), three-speed transmission, and a large and powerful engine (224 kW), as well as the highest lifting speed in its class. There are also models forklift trucks(37 - 42 tons) which are equipped with high-tech equipment, these loaders are designed to work in many modern ports. Loader model TCM FD420 unique - it allows stacking sea containers in five rows. In all models, the content of soot in exhaust gases is reduced by 30% and toxicity by 50%. All loaders have improved visibility.

Characteristics of diesel forklifts

Standard Equipment and Accessories for Diesel Forklifts

Wide view lift

Air filter type "Cyclone"

Weight control valve

Engine warm indicator

towing device

Rear cargo guard

protective roof

Power brake

Durable tires

Power steering

automatic transmission

Extended radiator tank

Turn signal lights

Battery charging indicator

Hour meter

Engine oil pressure warning indicator

Water temperature indicator.

Fuel gauge

Reversing light

Stopping the engine with the ignition key

Neutral safety switch

Rear view mirrors

Reversing horn

Suspension seat with seat belt

Steering column adjustable angle

Additional cargo equipment

Side shift forks

Fork positioner

Mounted fork carriage

Extended fork attachments

long fork

Optional equipment and accessories

Centralized lubrication system

Fire extinguisher

Catalytic Exhaust Filter

steel cab

Heater

Work lamp rear lighting

Alloy tires

spark arrestor

Exhaust system located above the driver's head

Water separator

Tilt Cylinder Covers

Power steering cylinder cover

Speedometer

Radiator with protection

© 1999 – 2019..

The site is under the protection of Stuchilin O.V. - criminal lawyer

The Japanese transnational company TCM is the world leader in the production of forklifts. Unites six enterprises. Four factories are located in Japan, one each in China and the United States. A wide range of specialized equipment from TCM currently includes 170 models of different drive types.

TSM loaders are multifunctional. Carry out operations for loading, unloading small and large-sized goods, their lifting, moving and stacking. Used for area cleaning.

1 Varieties of TCM loaders by drive type and their classification

The company's products, due to their quality and reliability, are in demand all over the world. The equipment has a relatively inexpensive cost, and in terms of individual characteristics it surpasses its branded counterparts.

The consumer has the opportunity to choose equipment that runs on the type of fuel that is convenient for him. There are three main types of drive:

• electric;
• petrol;
• diesel.

The TSM electric loader has a load capacity of 1 to 3.5 tons. Such cars are more economical in comparison with diesel and gasoline. Light versions of the machines are equipped with three supports, and heavy ones with four. Loaders have a short braking distances and protection rear wheels from drifts. An electric forklift, due to its environmental friendliness, is an indispensable assistant when working in closed warehouses and large retail outlets.

Gasoline vehicles are produced with a load capacity of 1.5 - 3.5 tons, with various attachment options. They have the ability to combine two types of fuel: gasoline and gas, when equipped with gas-balloon equipment (gas-gasoline loaders). Such machines are used in enclosed spaces due to the minimum emission of carbon monoxide.

Loaders consuming diesel fuel are in high demand in the market of the CIS countries and are manufactured in the following weight categories.

1. Multifunctional machines with a lifting capacity of up to 3.5 tons lift loads up to 7 m.
2. Units with a carrying capacity of up to 5 tons are equipped with powerful motors (up to 88 hp). Move loads at speeds up to 20 km/h.
3. Forklifts with a carrying capacity of up to 10 tons transport goods at speeds up to 30 km/h and calmly lift them up.
4. Heavy-duty giants powerful engines up to 225 hp confidently cope with loads up to 30 tons.

By external features and their purpose, TSM loaders are classified into the following:

• forklifts;
• frontal;
• bucket;

1.1 Forklifts

Two-pronged forks are used as working elements on such machines. TCM forklift FD60Z8, especially popular in our market, has the following brief technical characteristics:

• diesel engine, power -155 hp;
• track width - 1700 mm;
• minimum ground clearance- 190 mm;
• maximum speed - 26 km / h;
• maximum lifting speed - 550 mm / s;
• weight - 8630 kg;
• loader tcm fd60z8 has a load capacity of 6000 kg.

The TCM FD70Z8 loader is another popular forklift model. This model differs from the previous one in greater weight (by 730 kg) and load capacity by (1000 kg).

2 Front type machines

Such units are equipped with a volumetric bucket, mounted frontally. They are used both for lifting loads and for digging. These machines are also used for cleaning up areas. Frontal units have the following features:

• ability to work in severe winter conditions;
• fast transport progress with high load capacity;
• powerful environmentally clean engine with productive cooling system;
• replacement ability attachments to perform various construction, transport and utility tasks.

2.1 TCM bucket loaders

In bucket-type machines, the bucket acts as a working tool. In different models, its volume is different. Bucket-type models are available with and without operator cabs. Bucket units are used for transportation, lifting and.

This special equipment has the following features:

• ability to work in confined spaces;
• has powerful power units;
• volumetric bucket elements of the original design prevent spillage of cargo;

2.2 Mini loader TCM

This special equipment is distinguished by two main indicators - versatility of use and increased maneuverability. The versatility of TCM diesel skid steer loaders is determined by their design features and compact size.

The tcm mini loader has the following features:

1. The small turning radius allows turning on the spot. Achieved through hydrostatic transmission with two pumps and motors, as well as dry disc brakes.
2. The A-frame design of the bucket and the increased lift angle ensure that all operations are performed smoothly, which prevents the load from spilling.
3. Alignment of the working tool during lifting is provided by a hydraulic mechanism.
4. Attachments (forks, grabs, buckets different types etc.) changes over a short period of time.
5. Safe operation of the operator is ensured by a system of blocking hydraulic mechanisms.

The most popular models of universal mini aggregates are the TCM SSL 711 loader, the TCM SSL 707 and 709 loader. They are front-end machines.

These utility mini-machines have the ability to work with a wide variety of vehicles that are easily interchangeable. All models are equipped with a heated operator's cabin. Movement and operations are controlled by means of an ergonomic joystick. 709 model is intermediate, between the two mentioned, in terms of performance. TCM SSL 707, 709 and 711 models are used to perform the following main types of work:

• loading and moving bulk materials and soil;
• cleaning the territory from debris and snow;
• site planning on the ground;
• transport and storage work with cargo and goods.

TCM compact loaders move confidently over uncomfortable and slippery surfaces.

2.3 TCM electric forklifts

The new generation of electric machines TCM FB series is distinguished by its small dimensions. This increased their maneuverability. The limited space of warehouse space began to be used more rationally. The upgraded energy-saving system made it possible to use the standard battery without recharging up to 8-9 hours. Modern electric motor alternating current made engine braking possible. This prevents the rear wheels from skidding and minimizes the braking distance.

Electric machines manufactured by TCM can have a load capacity of 1 to 3 tons. According to statistics, the most popular electric forklift is the TCM FB 25 8V model with a load capacity of up to 2500 kg with a dead weight of 3030 kg and the ability to lift loads up to 3 m.

2.4 Loader giants

A real giant among all loaders is the TCM FB 300 3 model. This forklift has a load capacity of 30,500 kg, with a dead weight of 25 tons. It is used for moving goods over short distances and loading and unloading operations.

The TCM FB 300 3 loader has been unrivaled in its class for a decade and a half, since its first release in 1989. This is the best-selling model of the giants' loaders. This result is due to the high reliability of technology and a deep understanding of the requirements for TCM products in a particular production environment.

Small forklifts are indispensable in warehousing. Today, the ten largest manufacturers of such equipment are known on the world market, among which are Japanese firm TCM. The products of this brand are widely known in Russia, because it appeared at domestic enterprises back in 1980. In our country, the company "Special Equipment Velikan" has become the official distributor of TCM loaders.

Range Features

TCM equipment is synonymous with reliability and high performance. The first models rolled off the production line in 1949, but today the range of warehouse equipment includes TCM electric, gasoline and diesel forklifts, as well as stackers. various capacities for stacking goods on racks. The range of the company also includes additional attachments to expand the capabilities of the main equipment.

And yet, forklifts form the basis. To date, these are 170 models, which are conditionally included in three groups:

1. Diesel which are especially popular in Russian market. These are machines with a carrying capacity from 3.5 to 43 tons. Regardless of the power, this technique is capable of lifting loads to a height of up to 7 meters. "Giants" of this category can be supplemented with grabs of different widths, with which they lift rolls, barrels, bales, bags. Diesel cars valued for their high torque, economy and ease of maintenance. This technique has found wide application not only in small warehouses, but also in port facilities and railway stations. TCM diesel vehicles are marked FD.
2. Petrol, whose carrying capacity is 1.5-3.5 tons. They are used both in closed warehouses and in open areas. Compared to diesel engines, the engine of such loaders is designed for a longer resource. Latest Models are equipped with additional gas-balloon equipment, due to which it was possible to reduce fuel costs and minimize carbon monoxide emissions. Gasoline cars are marked with the letters FG.
3. Electrical with a loading capacity of 1-3.5 tons. This technique has a high level of environmental friendliness, so it is acceptable for indoor use. Despite the low power, the machines cope with lifting loads to a height of up to 6.8 meters. The advantage of TCM designs using an electric motor is operation without recharging for 8.5 hours. To reduce electricity consumption, the machines are equipped with multifunction display, which displays information about the operation of the system. TCM marks this line with the letters FB.

Classify technique Japanese brand it is possible according to its main purpose and appearance:

• forklifts;
• frontal;
• bucket;
• universal machines.

The advantage of Japanese technology

TSM machines are valued for their high resource. The manufacturer of its equipment gives a guarantee of up to 5 years or up to 5000 hours. One of the advantages of this brand was the rejection of complex electronic components, thanks to which it was possible to reduce the cost of repairs and maintenance.

On the Russian productions most often you can see diesel models. They are valued for their high performance and speed of raising and lowering the forks. On medium power units, it is equal to 54 cm / s on the rise with a load and 55 cm / s without a load. Regardless of the model, the cars are equipped with a two-speed automatic transmission, while the modes are switched with just one touch of the accelerator pedal. The same transmission is also installed on gas-gasoline loaders.

Despite the mass phase-out of diesel among leading automakers, TCM is confident in the safety of its engines and claims to comply with Tier 2 emissions requirements. This was achieved by updating the pre-ignition system. In addition to reducing gas emissions, it gives additional power and speed to the loader itself.

Cars increased load capacity used in tough conditions, give good performance due to a strong differential and axles mounted on the frame.

TCM loaders (all models) are equipment designed with the operator in mind. They have a fundamentally new mast: the extended distance between the lifting chains made it possible to increase the visibility of the frontal zone by 10%. For the operator, an ergonomic seat with suspension and tilt function was added. Its high sidewalls and backrest are a guarantee of safe work on slopes. The driver protection system is a belt with an automatic release function in a critical situation.

The seventh series of INOMA loaders

In 2005, fundamentally new TCM loaders of the INOMA generation entered the market. They did not add new forms, on the contrary, the models turned out to be very simple. The update is about performance. Technical characteristics of TCM loaders of the seventh generation brought them to the leaders. By updating the engines, the manufacturer managed to reduce the time spent on loading and unloading operations. The advantages of the TCM brand described above reveal the features of the seventh generation of Japanese technology.

The INOMA series has been known in Russia since 2005, but over the 14 years of its successful existence, it has undergone changes:

• reduced the weight of the instrument assembly and weight distribution, thereby increasing the level of stability and stabilization;
• changed the engine cooling system and hydraulic system;
• optimized the visibility of the upper zone, which simplified the work of the operator and increased the level of safety in the use of loaders in enterprises;
• added two freewheel cylinders instead of one, which in the Acroba series was located in the center of the mast.

Forklift Models

Three-ton trucks are popular in warehouses. Of the diesel models, the TOP includes FD30T3Z and FD35T3S. Gasoline - FG30T3C. With an electric motor, FB30-8 are in demand.

FD30T3Z

Diesel explosion-proof forklift with a cargo capacity of 3 tons. Lifting height - up to 3 meters, so this model is suitable for work in small warehouses. The delivery equipment includes standard forks. Crane boom, fork with pantograph, disk trencher are suitable as attachments for this model.

Specifications:

• dimensions (LxWxH, mm): 2705x1225x2090;
• fork length (mm): 1070/1200;
• corridor width (mm): 4150/4280;
• forward/reverse speed (km/h): 18.5/19;
• lifting speed under load / without load (mm / s): 450/460;
• clearance (cm): 14.5;
• slope (%/°): 18/10.2.

FD35T3S

This model is used for transporting goods on pallets over short distances. It has a load capacity of 3500 kg, while the lifting height is only 3 meters. FD35T3S differs from FD30T3Z only in power. Despite the increased dimensions, this machine can only be used in rooms with a level ground, since even small irregularities can cause it to destabilize.

Specifications:

• dimensions (LxWxH, mm): 2800x1290x2140;
• fork length (mm): 1070x150x50;
• corridor width (mm): 4235;
• forward/reverse speed (km/h): 19/19.5;
• lifting speed under load / without load (mm / s): 460/490;
• clearance (cm): 12.5;
• slope (%): 18.

FG30T3C

Loader with a gas-gasoline engine with a load capacity of up to 3 tons. Despite its compact size, it lifts loads up to 7 meters high. It comes with standard forks designed for the transport of containers (pallets). Additionally, you can install the capture of briquettes. Unlike popular diesel models, this petrol "baby" shows excellent speeds for raising and lowering the forks. One of its shortcomings is a small ground clearance, which complicates the operation of the loader on construction sites. But in overcoming the biases, it is difficult for him to compete.

Specifications:

• dimensions (LxWxH, mm): 2245x1070x2070;
• fork length (mm): 920;
• corridor width (mm): 3495;
• forward/reverse speed (km/h): 19/19;
• lifting speed under load / without load (mm / s): 620/660;
• clearance (cm): 10.5;
• slope (%): 31.

FB30-8

Not the most powerful electric forklift among Japanese equipment, but it is this one that can most often be found in warehouses. It is designed for Weight Limit 3 tons, while the lifting height is still the same 3 meters. Judging by the dimensions, the power of this model could have been more if not for the electric motor. In addition to the standard forks, a roll gripper and a cardboard gripper are also available. Of all the TCM electric forklifts, this particular model is considered the most compact and productive, so it is successfully used in tight spaces, for example, when working in the hold of a ship.

Specifications:

• dimensions (LxWxH, mm): 2510x1225x2075;
• fork length (mm): 1070;
• corridor width when storing pallets 110*110 (mm): 3705;
• speed with/without load (km/h): 14/15;
• lifting speed under load / without load (mm / s): 290/490;
• ground clearance (cm): 9;
• slope (%): 6.

Frontal

This technique is used not only for loading and unloading operations, but also for clearing roads. Front loaders from TCM work with quick-detachable equipment. The design of the chassis and transmission made it possible to adapt the equipment to Russian conditions. These are machines of increased maneuverability and increased tractive effort, which allows them to be used on soils with a low friction coefficient.

most popular model this Japanese brand is considered a skid steer front loader SSL-709. Its layout is classic: a two-beam boom and a hydrostatic transmission with a chain drive. The design of the bucket lift is designed according to the radial scheme. At the end of the boom there is a mechanism for quick change of attachments, which makes this model compatible with Bobcat.

Specifications:

• bucket volume (m 3): 0.35;
• load capacity (kg): 690;
• forward/reverse speed (km/h): 12;
• pulling force (kN): 24.5;
• turning radius rear (mm): 1380;
• machine length with bucket (mm): 3090;

Standard equipment and accessories:

Equipment:

• Brake lining material does not contain asbestos.
• Centrifugal air cleaner.
• Regeneration cooling system.
• Cylindrical bonnet support with safety stop.
• Seat with improved suspension and seat belt.
• Hitch.
• Engine with system preheating(diesel).
• sump fuel system(diesel).
• Steering with hydraulic booster.
• FTI transistorized ignition (gasoline engine).
• Reinforced top rail.
• Mast with increased visibility.
• Dipstick for checking the level of hydraulic oil.
• Class 3 and 4 ITA chassis.
• Tires with increased service life type J-lug.
• Lift circuit shut-off valve.
• Support wall of the load.
• Load control valve.
• Top air intake system.
• Power brake.
• Hydraulic clutch with hydraulic booster (manual gear change).
• holding rollers.
• Return hydraulic filter.
• Suction filter
  hydraulic system.
• Tilt stop valve.
• Level probe gear oil(shifting from
  amplifier).
• Transmission oil filter (power shifting).
• Fork 1070 mm (1220 mm for 5 tons).
• 2-spool control valve with pressure relief mechanism.
• 3-way catalytic muffler (petrol engine), made in USA.

Controls:

• Electric shift lever (shift with booster).
• Lift and tilt levers.
• Multifunctional
  switch (lighting and direction indicators) with an automatic reset mechanism.
• Parking brake lever with lock.
• Tilt steering column.

• The handle for simplification of landing in a loader.
• Reversing signal buzzer.
• Reversing lights.
• Improved floor mat with
  anti-slip coating.
• Clip for documents.
• Document holder.
• Electrical sound signaling device.
• Front combined lamps (direction indicators, dimensions).
• Glove box / Pen holder.
• Headlights.
• Rear combination lamps with high setting(rear dimensions, brake light, reversing light, direction indicators and reflector).
• Driver tool kit.
• Awning of the top protective protection.
• Side view mirrors.
• Tilt cylinder covers.

Instruments and switches:

• Air cleaner clogging indicator.
• Charging indicator.
• Check engine indicator (for gasoline engines), made in the USA.
• Engine oil pressure indicator.
• Fuel gauge.
• Fuel system sump indicator.
• Glow plug indicator (diesel).
• Operating hours counter.
• Engine ignition cut-off system (diesel).
• Neutral safety switch.
• Water temperature gauge.

Additional cargo attachments:

• Forks of various lengths.
• Bale grab.
• Grab for cardboard (on request).
• Crane console (on request).
• Barrel grip (on request).
• Fork grip (on request).
• Fork extensions. Fork setting device (hydraulic type).
• Setting device
  fork (manual type).
• High and wide supporting wall of the load.
• Hinged forks, bucket.
• Load pusher (on request).
• Load stabilizer (on request).
• Ram.
• Swivel grip for bales.
• Rotary forks (mounted, built-in type).
• Rotary capture for a roll of paper (hinged, built-in type).
• Sideshift device.
• Hook with sleeve (on request).
• Extended fork carriage. 2-stage wide view mast (VFM). 3-stage wide view mast (VFHM).

Additional equipment and auxiliary mechanisms:

Equipment:

• Air conditioner (steel cabin).
• Auxiliary hydraulic valve modules.
• Centralized lubrication system.
• Colored tires (white, green).
• Exhaust system with filter (diesel).
• Double element air cleaner.
• Engine pre-air cleaner.
• Silencer with catalytic converter for cleaning exhaust gases.
• Front driving twin wheels.
• Heater.
• Heater and defroster (steel cabin).
• High top guard (2400 mm).
• Hydraulic oil cooler (diesel).
• Low top guard (2130 mm).
• Device for operation on liquefied gas or combined fuel (gasoline engine).
• Overhead exhaust system.
• Radiator with lamellar fins.
• Dustproof mesh for radiator (small and medium mesh).
• Semi-integrated power steering.
• Silencer with smoke filter and spark arrestor (diesel).
• Solid tires (special soft tires).
• Steel cabin.
• Windshield with wiper.
• 4-cylinder mast.

Auxiliary equipment:

• Coloring as agreed with the customer.
• Fire extinguisher.
• Rear work lights.
• Rotating warning light (beacon).
• Cover of a rotary hydraulic cylinder.
• Cover of a hydraulic cylinder of an inclination.

Instruments and switches:

• Ammeter.
• Control monitor (fuel level, battery electrolyte level, coolant level, parking brake, air cleaner).
• Speedometer.
• Torque converter hydraulic oil pressure gauge.
• Torque converter hydraulic oil temperature gauge (power shifting).