Learning how to properly control the steering wheel is the primary task of all novice drivers.. With this skill, the motorist will be able to avoid most of the mistakes leading to accidents, the number of which is steadily growing in 2019.
Do not neglect this skill, since the wrong position of the driver's hands on the steering wheel can prevent him from quickly making a maneuver.
It is noticed that each specific driver has his own style of handling the steering wheel: some grab the steering wheel with both hands, others steer with one hand, and still others manage to control the car only with their fingers. A natural question arises: how to turn the steering wheel of a car correctly?
Since the road is a place of increased danger, there is no place for ignorance and frivolity in matters of driving. Therefore, anyone who is not completely sure of the correct driving method chosen should once again learn all the steering techniques.
It is this practical driving skill that should come first.
How to hold the steering wheel while driving? If you are driving in a straight line, keep your hands on the steering wheel in the 9:15 position.
To do this, imagine that the steering wheel is a clock. Based on this, put your left hand on the number 9, and your right hand on the number 3 (or 15). You must hold the steering wheel with both hands.
Thanks to this, you will be able to control the car, ensure easy handling of the car and traffic safety. You will also be more comfortable using the shift buttons on the steering rim and turn signal levers.
If your car is driving on asphalt, then the thumbs should be above the partitions, but if it is driving on a dirt road, then the fingers should be placed on the partition.
Remember to hold the steering wheel firmly enough to properly control the machine. However, digging into the steering wheel is strongly discouraged, even during sharp turns.
Hold it confidently enough, but do not pinch it, because otherwise your hands will get tired very quickly.
Video: How to rotate the steering wheel of a car
Steering technology
While driving a car, the driver often has to turn off, overtake other cars, turn around or change lanes. All these maneuvers can be performed in different ways, depending on the angle of rotation.
With a large angle of rotation (from 90º or more), you should use the method of intercepting the steering wheel. How to intercept the steering wheel correctly:
- Take the original position of the hands on the steering wheel.
- With both hands, gently twist the steering rim to the left until the left hand rests against the left side.
- For now, take your left hand off the steering wheel and let your right hand continue to turn it.
- Next, quickly move your left hand over your right hand and grab the steering wheel.
- Then, when it will no longer be convenient to turn the steering wheel with your right hand, it must be shifted to the upper zone of the steering wheel.
- Then you should proceed according to the following scheme: continue to turn out the steering rim, intercepting it.
- When the car returns to the correct trajectory, it should immediately be leveled. Now you need to turn the steering wheel to the right side according to the same principle.
You don't have to turn to turn right. wheel two hands. To do this, you can use only one left brush:
- Do not touch the steering wheel with your right hand.
- Place your left hand slightly above the middle of the steering circle, without squeezing it too much, and slowly begin to turn to the right.
- Then, when the hand can no longer turn, you need to squeeze the steering wheel with a brush.
- Then you need to straighten your fingers and turn them 180º. While doing this, place your palm on the steering wheel and keep turning it. Your task is to return the hand to its original position.
- You can repeat the maneuver if necessary.
With a small steering angle (up to 45º), you do not even have to change the position of your hands on the steering wheel. The simplest steering technique involves the following algorithm of actions:
- On the steering wheel, take the original position of the hands.
- When overtaking or changing lanes, turn the steering rim in the desired direction, while keeping your hands on it.
- Upon completion of the maneuver, return to the starting position, release the steering wheel.
The advantage of this method is that you don't have to worry about the wheels getting crooked and then having to straighten the car.
However, this method should not be used in cases where a large corner radius requires a turn or a U-turn.
While driving, there are often cases when one hand has to be distracted from driving to solve a problem. For example, you need to turn on or off the radio, stove, air conditioner, etc.
Of course, such actions must be minimized, and it is better to search for the necessary little thing in the glove compartment or an important conversation on the mobile phone after the traffic has stopped.
However, unfortunately, such manipulations cannot be completely abandoned, so it is important to learn how to control the steering wheel with one hand.
To do this, master the following technique:
- Squeeze the top of the steering wheel with your left hand and control the movement with it.
- At the same time, use right hand in resolving the issue. Then return both hands to the starting position.
Carry out driving in reverse in two ways: or by turning your head back to good review or keep a close eye on the rear-view mirrors.
The first option is the most common and convenient, as it makes it possible to notice an unexpectedly appeared pedestrian or other possible obstacles in time.
Where do you turn the steering wheel when reversing? If you adhere to the following basic rules, you can quickly master this important skill:
- In left-hand drive vehicles, turn half to the right and look in the direction of travel.
- If the car must move straight or a right turn is necessary, then it is better to hold on to the back with your right hand front seat passenger, and with your left hand to hold the steering wheel to control.
- If, moving backwards by car, you need to make a left turn, then you need to turn around on the seat half-side. In this case, the elbow of the left hand must be placed on the back of the driver's seat, and the car must be driven with the right hand.
What to do if the car skids?
In addition to all the shortcomings of our roads, in winter, driving on them will become even more complicated due to snow and ice, which can often lead to a car skidding. A car can be brought in due to any inept or careless action on an icy road.
In such cases, machines with rear wheel drive, however, such an unpleasant incident can also occur with the currently popular front-wheel drive car.
If this happens, then the first and most important thing that not everyone succeeds in is to remain calm and not succumb to panic. And then, in order to get the car out of a skid, you must perform the following steps. Well, if they are worked out in memory to automatism.
So, where to turn the steering wheel when skidding front wheel drive? For a car with front-wheel drive, the steering wheel must be turned in the direction of skidding and a little gas should be added. It is important that the driver feel the skid.
The most important thing is to work with the steering wheel, in no case do not change gears, and also do not put pressure on the brakes. Pulling the handbrake is also prohibited, since this will only increase the skid, so the car will simply turn around and you will hook other road users.
In this case, you should also rotate the steering wheel in the direction of skidding, release the gas, depending on the speed. It is also forbidden to change gear, do not touch the clutch, handbrake and brake.
For all-wheel drive the hardest thing to get out of a skid, so in most cases it remains only to wait until the car stops itself. The only thing that can be done is to slightly turn the steering rim towards the skid and in no case add gas.
The issue of proper parking in the city deserves special attention, since training ground it is simply impossible to simulate all the situations that arise in the real world.
In order not to get into stressful situations while driving, try to always find a parking space in front.
It is also very important that every driver is informed about how to turn the steering wheel when parallel parking:
Remember: visibility is critical when reversing. That's why don't arrange next to rear window piling up things, as this can become a hindrance while moving backwards.
So, you should steer the steering wheel as correctly as possible, because it is on this that life can depend - both yours and that of other participants. traffic.
Motorists after a long drive stop noticing the constant vibrations that come from the car. Some of these vibrations signal that everything is in order with the machine, but some can be a “bell”.
Sometimes these “bells” go unnoticed, which is why serious car breakdowns often occur, and even more – accidents. Particular attention should be paid to the movement of the steering wheel, or rather, to its beating. Often, drivers believe that the steering wheel vibrates due to the lack of balance of the wheels. Of course, this is one of the reasons for such a problem, but sometimes there are others.
In order to determine what exactly makes the steering wheel vibrate, you need to drive along the road, switching to different gears.
As soon as you feel the beat, then you need to remember the speed at which the steering wheel loses "balance". You also need to determine at what speed the vibration stops. Often, the beating is felt in two ranges: while driving at low and average speed vibration is noticeable, after switching to a higher speed, the beating disappears, and with greater acceleration it reappears.
The speed range can also depend on the strength of the beat, that is, a weak beat can only be felt at high speed. It is also necessary to conduct an experiment with acceleration and deceleration, that is, to determine the behavior of the car during such maneuvers, and also pay attention to the force of the beating.
Causes of steering wheel wobble at speed and when braking
Beating at speed
Loss of balance due to mud/snow
The most common reason for the beating of the steering wheel. Sometimes the whole machine can vibrate because of this. This is due to the fact that snow or dirt gets into the disk. The steering wheel or the whole car vibrates for a certain period of time, then the beating disappears after the car has picked up speed. The vibration may no longer appear, and may repeat again.
If available, you can easily determine whether there is dirt on them or not, but steel discs the ventilation holes are small, and they also have special caps to improve the exterior, so it is very difficult to see the dirt there. Most of the dust accumulates on inside disk. Exit - complete cleaning of pollution.
High speed imbalance
Due to the fact that rims and tires are not perfectly even in shape, as well as imperfect in composition, the mass in different areas of the disk is different. Because of this, the center of the wheel will be pulled towards that part, the mass of which is greater. Due to the center shift, the centrifugal force will also shift, due to which the steering wheel will transmit vibration that occurs when forces are transmitted through the chain of rods during fast revolutions.
Therefore, sometimes it is necessary to balance the wheels, and especially after the wheels and tires have been replaced. Balancing is the alignment of the mass of the wheel at all points through the use of special weights that need to be attached or glued to the rim.
If you drive a car for a long time, the wheels of which are unbalanced, this will lead to excessively rapid tire wear in some places. This will increase the vibration. Also, the wheel bearing and suspension elements will be subject to excessive wear.
The main sign that the wheels are out of balance is a relatively weak vibration while driving at high speed (in the case of a passenger car, the speed is at least 60 km / h). You need to carefully inspect the wheels: if on rims there are no dents, if they are even, the tires are in good condition, and the vibration is noticeable either only on the steering wheel or during the acceleration the whole car starts to vibrate, then most likely the problem lies in the imbalance of the wheels.
Deformed rims or tires
The degree of curvature of the wheels greatly affects the presence / absence of vibration. The wheels are deformed in the process of getting into the disc pit. You can determine whether a wheel is crooked or not by a simple inspection. You need to carefully look at the wheel shell and check if there are any dents. Often the inner part of the disk is more deformed. Alloy wheels less deformed to a lesser extent, but steel ones are more susceptible to such a defect.
The discs can be deformed during the operation of the machine, as well as be crooked initially. You can check this fact only at a tire fitting, where the wheel will be placed on a balancing stand. At the stand, the wheel will “behave” absolutely normally, but while driving it will not spin smoothly. If the disk goes "eight", then it is either defective or badly deformed. It is precisely because of the presence of such defects that not only the steering wheel, but the entire machine can vibrate.
If the wheels have very worn or deformed tires, as well as defective tires, then the steering wheel can vibrate very much, and along with the car.
If the disks and tires are damaged, the symptoms of the “disease” will be the same: both the steering wheel and the entire car can vibrate. At low speeds, only the steering wheel can “beat”, and with a set speed, the vibration will go to the whole car. The more warped the tires/rims, the slower the speed at which the vibration will be felt. With such a problem, the only way out is to replace the disks or tires.
Insufficient tire pressure
With such a problem, the whole car often vibrates, but very rarely the steering wheel. If you make a simple diagnosis, then everything will become clear. And the way out of this situation is clear - pump up the tires.
Weak wheel alignment
This vibration is extremely dangerous. With a weak mount, which is not noticed in time, the wheel can simply fly away from the car while driving, which can end badly. If this problem is not detected in time, then after a while there will be a lot of things, for example, discs, brake discs, part of the hub. These elements can be damaged because the friction of the wheel on loose cotter pins or bolts will be much stronger than usual. And this can lead to the fact that the bolts are severely deformed along with the mounting holes in the disk itself.
Vibration in the case of such a defect will be felt even at a very low speed, at the start of the movement. The beat may be acyclic and may not always appear at the same speed. Be sure to stretch all the bolts and nuts on the wheels.
Worn or defective steering or suspension components
The condition of the suspension elements directly affects the contact of the car with the road. If there is play in any suspension element, then there will be a strong imbalance when the wheels rotate, similar to the imbalance in case of poor condition of the wheels.
But you need to remember that the gaps of the suspension components cannot directly cause vibration of the car or steering wheel. The part that is not fixed is a kind of vibration catalyst from the wheel. That is, main problem in this case, the wheels are, and the suspension in your car is simply weak.
This reason is indirect, since the problem with the suspension or steering system itself cannot lead to a violation of the uniformity of the ride.
Vibration when braking
Problem with brake discs or drums
If the vibration on the steering wheel or the vibration of the machine occurs only during braking, then this is the main sign of a malfunction of the brake discs or drums. This means that they are simply deformed, that is, their working surface is uneven - wavy, or not perfectly round.
Due to severe wear, these elements may change their shape. Also, deformation can occur due to overheating with too long and strong braking. It can also happen if you slowed down for a long time, from which the discs or drums overheated, and then contacted with water or suddenly cooled down, for example, the car drove into a puddle. In this case, the brake disc becomes wavy, and the drum becomes uneven.
If such a deformation takes place, then vibration will occur only during braking, that is, during contact brake pads, which compress the drum or disk, and after that the entire brake system. In this case, the only way out is to change the brake drum or disc.
Causes of steering wheel beating when cornering and on rough roads
Runout when cornering
If the steering wheel starts to vibrate when the car enters a turn, then this indicates that either the constant velocity joints (Shtrus) or the silent blocks have come out of the standing position. If the struts are out of order, then you will hear a characteristic crunch from the wheels during the turn. During repairs, it is imperative to check the condition of the wheel bearings. To prevent breakage of elements running system, it is necessary to conduct a regular inspection of the details of all the undercarriage system from the flyover.
The first "bell" that signals the presence of a problem is the crackling of anthers, in which cracks have appeared. In this case, they need to be replaced. Cracking can occur due to dirt or sand getting into the lubricant. In order to fix this, you need to clean the anther with a solution of gasoline, lubricate and install a new anther.
Beating on a rough road
If you feel a beating or vibration while driving on uneven terrain, this indicates damage to the steering rack. The first thing in the steering rack is the bushing malfunctioning, and the repair must begin with the replacement of this part. Poor shock absorber condition can also affect rough road handling. If the shock absorber is defective, then it will not be able to soften the vibrations and shocks that are transmitted to the steering mechanism.
If you feel any vibration of an unknown nature, then you need to inspect the machine as soon as possible in order to prevent serious damage.
Learning how to properly hold and turn the steering wheel of a car is an important problem for a novice driver. By learning this procedure, the car owner will be able to prevent many mistakes that usually lead to traffic accidents, the number of which is constantly increasing in 2017.
This skill should not be neglected, the wrong position of the driver's hands can contribute to making an erroneous maneuver. Experts note that every driver drives a car in his own way: some take the steering wheel with both hands at once, and many drive on the road with one hand. There is also a category of drivers who control the steering wheel with their fingers.
But many people ask, how to properly rotate the steering wheel so as not to get into an unpleasant situation? The road is a place of high danger, while driving on it one should not take the traffic situation lightly. Therefore, those who do not know how to drive a car correctly, and especially to control the steering wheel, need to learn all the safe techniques. This skill in practice is important, above all. Such techniques can be learned while driving a car, as well as on an electronic simulator while at home.
How to hold the steering wheel
If you are driving on a straight road, it is better to keep your hands in the dial position 9-15. To do this, you need to put your left hand on 9, and your right hand on 15. Hold the steering wheel with both hands. In this way, you can control the movement of the car, create easy control and safe driving. It will be more convenient to use the switches on the steering wheel and turn levers.
If your car is moving on an asphalt surface, then the thumbs should be placed above the partitions, and when driving on a dirt road - on the partition itself. The steering wheel must be held firmly to ensure good control movement. But it is not necessary to cling too much to the steering wheel, even during sharp turns. It must be held confidently, and not overdo it, otherwise the hands will quickly get tired.
Hand movements can be divided into the following types:
- labor movements(start from the moment you grab the steering wheel, their end is the moment you release the steering wheel).
- idle movements(they occur during the period when the steering wheel is released, and then until you take it again).
It should be remembered that when picking up the steering wheel, as well as when releasing it, it should not stop.
Novice driver mistakes
The first lessons of practice are the most important, but many beginners make many serious mistakes due to excitement. The first mistake is to return the steering wheel to its original position after making a turn, despite the design of the steering mechanism, which allows you to automatically return the steering wheel to the position of driving the car in a straight line. There is no need to turn the steering wheel by hand. While driving, an important task is not to take unnecessary actions in order to navigate the traffic situation in time.
Common rookie mistakes are:
- Jerking the steering wheel. The hands should be relaxed and the grip soft - the main points that should not be forgotten when driving. Do not apply much force to the steering wheel when making a turn. In this case, you can sharply enter the trajectory of the turn, but after a short time of such turns, the car will have to be sent for repair, tires and suspension will be damaged. When the wheels slip, it will be impossible to drive the car, so you can not be too zealous when turning the steering wheel, and the car will serve you for a long time, and no repairs will be needed.
- The driver "hung" on the steering wheel. When driving a car, only hand force should be applied to the steering wheel. Muscles that are not working at the moment should be relaxed. To fulfill these conditions, it is necessary to use a special support designed to rest the left leg, lean more closely against the back, and be fastened with a belt. With the help of such rules, you will merge as much as possible with the car as one.
- Steering wheel stranglehold. To make a turn on the road, you need to apply some force to the steering wheel, but do not take it with a stranglehold. You should learn to quickly relax your hands. With constant voltage, the car will react badly, and you will often get tired while driving.
Steering technology
When you drive a car, you often have to make maneuvers. Such maneuvers can be performed in different ways, they depend on the angle of rotation. When landing behind the wheel, after starting the engine, it is necessary to clasp the steering wheel with your palms, do not squeeze it with great effort. The left hand should be at 9 o'clock when looking at the clock, and the right hand at 3 o'clock. Elbows should be slightly bent. This position allows you to quickly respond in case of accidents.
If you need to turn the car 45 degrees, then you do not need to change the position of the hands on the steering wheel. This is the most simple technique movement. It is necessary to perform the following actions: put your hands on the steering wheel in a position as described above. When changing lanes or overtaking, the steering wheel must be turned in the appropriate direction. Do not take your hands off the steering wheel.
After making the turn, return to the starting position and do not touch the steering wheel. This method is suitable because you do not need to return the wheels to a straight position yourself, everything will happen automatically. But this method cannot be used if you want to make a U-turn or turn with a significant turning radius. You can optionally straighten your arms when they are in the starting position.
If the turn is sharp, then the rudder interception method is used. Let's figure out how to properly intercept the steering wheel:
- Set your hands to the starting position.
- With both hands, slowly turn the handlebar rim to the left until the left hand touches the corresponding side.
- At this moment, you need to remove your left hand from the steering wheel, and turn with your right.
- Then quickly move your left hand along the top edge of your right hand and grab the steering wheel again.
- When it becomes uncomfortable to turn the steering wheel with your right hand, you need to move it to the top of the steering wheel.
- Then they work in the following order: continue to turn the steering wheel, intercepting it.
- After returning vehicle on the correct path, straighten the machine immediately. Now you need to rotate the steering wheel to the right using the same method.
To turn right, it is not necessary to turn the steering wheel with both hands. It is advisable to use only the left hand.
- Do not touch the steering wheel with your right hand.
- Place your left hand above the center of the handlebar rim, gently squeezing it, and gradually turn to the right.
- When the hand is not able to turn, then it is necessary to squeeze the steering wheel with a brush.
- Next, you need to straighten the brush and turn your fingers 180 degrees. At the same time, put your hand on the steering wheel and continue to turn it. The task is to return the hand to its original position.
One hand operation
Usually when driving it happens when one hand is busy. In such cases, it is useful to be able to steer with one hand. To learn this, you need to squeeze the top of the steering wheel rim with your left hand and control it. Let's take an example: the right hand is busy. When it is released, you need to put it back on the steering wheel. Procedures with an occupied hand must be performed promptly in order to return it to its place as soon as possible.
In this case, training is an important factor. If you train purposefully, you can learn to drive faster. This is carried out on a free area, or on a deserted road, where you can try braking, accelerating and turning.
- First you need to conduct experiments. You can start at low speed and slowly accelerate. The speed can be different, while it is possible to compare what force must be applied to drive the car at high speed, and what force at low speed.
- Try to turn the steering wheel, press the brakes all at the same time. See how the car reacts to all manipulations.
- Relax your hands, do not hang on the steering wheel, keep your body in the right position, and make sure that the weight of the body does not interfere with movement.
- enjoy different ways controls, combine them with each other.
- If you want to rebuild, you need to find out exactly how the vehicle will behave on your manipulations. Try to rebuild slowly first, then quickly.
- At second gear, try to turn while pressing on the gas pedal, and then coasting, releasing the gas. In this position, you need to watch how efficiently the car makes a turn.
For getting driving license You must successfully pass the theory and practice of driving a car. At practical exams, they usually pass the well-known “snake” exercise. It is performed on a platform in the shape of a rectangle, consisting of four identical sections in area. The length of these sections is 1.5 times the length of the car, and the width is determined by the length of the car. Naturally, it is advisable to practice somewhere before passing the exam of such an exercise.
On the site, it is necessary to install racks from improvised means - bags, water bottles, canisters, etc. In total, six racks are needed: at the start, finish, intermediate - four. Foreign vehicles there should not be on the site, so that there is freedom to perform maneuvers in the exercise.
The meaning of the exercise is to travel this distance along a trajectory similar to a snake. In this case, you can not touch the racks. First you need to drive up to the "start". Gradually start driving in a straight line. When the car starts moving, you need to fully depress the clutch pedal, the car will roll by inertia.
When the first mark as a rack reaches the middle of the front door of the car, then you need to turn the steering wheel to the left, while only one turn is made. The first rack is passed at an angle of 45 degrees.
It is necessary to control the second rack. When it appears on the right side, then align the wheels by turning the steering wheel to the right one full turn. Drive in a straight line, after reaching the second pillar of the middle of the right front door, two full turns of the steering wheel to the right are made. After that, you need to lightly press the gas pedal, release the clutch pedal a little, and move the car forward a little.
After that, you need to press the clutch completely. Next, control the third rack. As it approaches and passes its left front fender, align the wheels by rotating the handlebar two turns. Then similar actions are carried out. Some beginners have problems getting to the finish line. This is done in this way.
When the car reaches the 5th pillar and approaches the middle of the left front door, the wheels should be set for straight-line movement, the steering wheel must be rotated a full turn to the left. Look ahead, when the front of the car is directed to the stop mark, you need to align the wheels with one turn of the steering wheel, turning it to the right. Then you should get closer to the finish line. For reference, use the 6th rack. Turn off the speed and put the car on the handbrake. On this exercise "snake" can be considered complete.
The main problem with this exercise is touching the racks. After that, they fall, and you are awarded penalty points. To prevent such facts, you need to drive smoothly, the speed of movement should not change, you should not press on any pedals. The main task is that you need to turn the steering wheel in time.
Another mistake when performing a "snake" is: when driving slowly, a novice driver also slowly turns the steering wheel, which, of course, is a mistake. You need to turn the steering wheel quickly, but the speed of the car should be small. Achieving proper steering is a must for every driver. Only a quick reaction on the road, without fuss and panic will ensure you keep the car intact.
Reverse steering
Our roads have many shortcomings, but in winter more ice and snow are added, which often leads to a skid of the vehicle. The car may skid due to the careless movement of the driver on a slippery road. In such situations, rear-wheel drive cars are considered the most dangerous, but this unpleasant moment can also occur in a front-wheel drive car.
If a skid occurs, then you need to remain calm and not panic. Further, in order to bring the car out of this state, it is necessary to perform some automatic actions that must be developed by many years of driving.
In which direction should you turn the steering wheel when a front-wheel drive car is skidding? The steering wheel must be rotated in the direction of skidding and add gas. An important factor is that the driver can feel the moment of skidding. The main thing is the work of the steering wheel. In this case, you can not shift gears and brake. It is forbidden to use the hand brake, this increases the skid. The car will turn around and an accident may occur.
Where to turn the steering wheel during a skid in a rear-wheel drive car? In this case, the steering wheel is also rotated in the direction of skidding, the gas is released. It is also forbidden to press the clutch, change gears and use the brakes.
For an all-wheel drive car, it is more difficult to get out of a skid. Most often, you just have to wait for the car to stop by itself. You can only turn the steering wheel slightly in the direction of skidding and not add gas.
Parallel parking
Proper parking by car in the conditions of the city is important point. At the training circuit, it is impossible to accurately repeat all the moments that actually occur. It is better to try to find a place for the car to park in front.
Parallel parking works like this:
- Line up with a car located nearby, stand parallel, maintaining a distance of 1 meter.
- Determine where to turn safely.
- Move in reverse until the mental mark reaches the edge of the car on the right.
- Turn the steering wheel all the way to the right, drive at reverse speed until the right edge of the car is visible, stop.
- Turn the steering wheel to its original position and drive further back until you can see the car in front.
- Turn the steering wheel all the way to the left, back up until the car is parallel to the curb.
- Level the machine and place it so that it is at an equal distance from other machines.
Which of the motorists has ever thought about what the position of the hands on the steering wheel should be, how to properly position your hands so that it is not only comfortable to drive a car, but also to correctly use the steering wheel. The main rule is that your hands should be on the steering wheel while the car is moving. Very often, drivers do not adhere to this rule, and drive a car with only one hand. But this is not advisable. In fact, if the driver complied with all the requirements and rules, then there would be an order of magnitude less accidents on the road.
In any case, one hand should be leading (it will control the state of the steering wheel), and the second - on the pickup.
Making a left turn:
In this case, you need to perform the maneuver with both limbs, while turning the steering wheel will have to be as large as possible. It is necessary to take it so that when performing a maneuver, be intercepted hands. Intercept hands only when you understand that without it further execution of the turn is impossible. Very often, drivers, and not only beginners, touch the steering wheel with both hands when turning. 
You need to understand that this action is not only absolutely useless, but, most importantly, as a result of losing control over the car, you will not be able to level it as quickly as possible.
When it is necessary to turn left at a large angle, then your hands should work in the following order: the right in this situation will be driven, and with the left you will touch the steering wheel with short interceptions. After you turn the steering wheel with your left hand, you need to intercept with your right hand a little lower than your left. With such hand movements, enter a sharp turn.
Making a right turn:
The position of the hands on the steering wheel when turning to the right is similar to the maneuver to the left. Only the left hand will be the leading hand, and the other must perform intercepting movements. After turning the steering wheel, intercept with your dominant hand so that you can turn the wheel further. Such manipulation often helps the driver to get out of the snow drift. In such situations, it is necessary to control the hands very sharply, since the slightest delay can lead to undesirable consequences. 
Depending on the situation on the road at a certain moment, control can be divided into two types:
- high-speed
- Power
The power method lies in the fact that driving is done either with both hands, or alternately, but with interception. The position changes depending on which turn is currently needed and what its angle is. Before turning, your hands should be in a neutral position. Before turning, you need to move the right one up along the rim with light and sliding movements. Next, start turning with your right hand. And the left one at this time moves down the rim in the opposite movement of the steering wheel. Grasp the steering wheel from below with your left hand and turn the steering wheel until the maneuver is completed.
The high-speed method is used infrequently, mainly by professional motorists. The name itself means that with this type of control, the steering speed will be much faster, position changes can be performed with one or both hands. But the big disadvantage of such control is that the driver may not know at the moment how the wheels of his car are located, this makes it difficult to maneuver and quickly establish balance. 
An example of such a high-speed method when turning right with one hand is to start with the back side from the bottom edge of the wheel and smoothly move to an open grip, and then just as smoothly move to a closed one. This technique is performed in a matter of seconds and anyone can learn this method in just a few times. But for city driving, this method is still not recommended, like any other driving with one part of the body.
Common Mistakes
The position of the hands on the steering wheel should be such that the driver of the car can turn the wheels in the right direction at any time.
The right kind of girth helps to do this with ease. In the process of driving, when the driver gains experience, he independently understands how to take the steering wheel correctly in this or that case. 
But beginners make many mistakes, the most common of them are:
- The position of the hands on the steering wheel when the elbow is in the open window opening of the car or rests on the armrest. Such a relaxed state entails a lot of troubles, one of which is the inability to quickly respond to a change in the situation on the road. This type of driving is very often formed by drivers in the 2nd year of driving, when there is confidence in their abilities and control over the track is lost.
- Turn with crossed arms. When the car is about to turn more than 60 degrees, the steering wheel goes through more than one ring. Therefore, the hands can get confused and there will come a moment when the driver can start up the steering wheel with both. Everything would be nothing automatic box gears, then the hands will move to a different position and the maneuver will end, but with mechanics, when after the maneuver, the wheels, as a rule, return to a neutral position, the car can skid. To avoid this - use interceptions, this is a reliable way.
- Most urban accidents are due to the fact that car owners neglect the rules of driving, the rules of correct position and generally accepted norms. Often, failure to follow basic rules increases the likelihood of losing control of the car. A very big recommendation for all car owners is to drive a car with two parts of the body, even if it’s not as “cool” as driving with one left.
In conclusion, I would like to wish all motorists to be careful and adhere to the rules, because this is something that can save not only the car, but also the lives of passengers. Proper hand position on the steering wheel can ensure every driver is able to respond to calls on time traffic situations. Try to take this into account and improve your riding every time, and not feel confident from scratch. Good luck driving!
Video “How to keep your hands on the steering wheel”
On the recording, the auto expert talks about how to turn the steering wheel correctly and where the hands should be when the car is moving.
The primary goal of all novice drivers. Knowing how to turn the steering wheel, the motorist will be able to avoid most mistakes on the road. Neglect of this stage of training leads to a number of negative consequences.
The rotation of the steering wheel implies bringing the movements of the hands to automatism, which will make it easier to control the vehicle. You can learn how to turn the steering wheel at home, created by yourself.
Hand movement classification:
- The movement of the working type - begins from the moment the steering wheel is captured and ends at the moment it is released.
- Idle type movement - implies the moment between releasing the steering wheel and its subsequent capture.
- Releasing and grabbing the steering wheel during its rotation - the steering wheel should not stop.
Rookie mistake
For novice motorists, they are extremely important, but many of them, due to excessive excitement, make a number of significant mistakes. One of them is the return of the steering wheel to its original position after the turn. Although the control mechanism is designed in such a way that the steering wheel always automatically returns to a position after twisting, which corresponds to the movement of the vehicle in a straight line. Accordingly, he does not need help from the driver. Correctly turning the steering wheel of a car in the first place means being able to avoid unnecessary hand movements.
The driving process itself is not disturbed, but when it occurs, you need to be able to adequately coordinate your actions.
On the video - the main positions of the hands on the steering wheel:
Steering methods
Steering features are different, but for the most part they all depend on the position of the hands and the speed of circulation.
In any case, the horizontal position "9-3" is considered the initial position of the hands. This is due to the availability of control levers for turn signals and wipers, which are located directly under the fingers of the motorist. In general, the entire ergonomics of the steering wheel is designed specifically for this position of the hands.
The three main ways of steering depend on the type of turns, which, in turn, are divided into smooth, medium and steep. much more difficult than on a straight track. Only knowing the steering techniques applicable in this case, you can enter the turn without harming the driver and the car.
Entry into a smooth, with a large radius, high-speed turn is carried out with two hands, without the slightest separation from the steering wheel. At the same time, the hands do not move, the angle of rotation is relatively small, approximately a quarter of the steering wheel. The maximum steering wheel offset in this case is 180˚. When making a speedy smooth turn the steering wheel just “tilts” a little in the direction of the maneuver. called "pushing". Turning to the left, the right hand acts as the dominant hand, and vice versa. An erroneous option is to turn the left hand to the left.
On the video - how to steer correctly:
Turns of an average level of complexity are accompanied by a change in the initial position of the steering wheel by three quarters of a turn. Such turning sections are considered the most common. Without tearing off the hands, it will not be possible to perform a maneuver in this situation. And if something happens, it will look very strange. Therefore, a different technique has been developed to overcome this type of turns. The driver must place his right hand on the steering wheel at the 6 o'clock position. Only from the lower position is a turn to the left. This will significantly increase the angle of rotation of the steering wheel. However, it all depends. The angle of rotation must be such that the maneuver is successful.
This steering method can be called universal and suitable for most cases. It is suitable for both left and right hand bends. The dominant hand, as in the previous case, should be opposite to the turn being performed. She also carries out the return of the steering wheel to its original position. An unused hand simply passes the steering wheel through itself.
Under no circumstances should you let go of the steering wheel. Its sharp rotation is considered a gross and unacceptable violation. Management control is the main task for the motorist, performed during the entire movement to a complete stop.
At sharp turns(entry-exit to the yard, 180˚ turn) the "Interceptions" technique is used. When carrying out the maneuver, it is necessary to quickly turn the steering wheel to the maximum possible angle, that is, to its boundary position. You need to turn the steering wheel in two movements with your hands and also return it to its original position. At the end of the reception, the driver’s hands should be on the steering wheel in the “9-3” position. This position will allow the car to continue moving in a straight line, accelerate to a certain speed and other vehicles in the places established for this.
Taxiing with one hand, although it is quite common, is not correct. Such a technique is possible only when the car is moving in reverse, as well as when putting the car in the garage.
On the video - how to and how not to turn the steering wheel:
Often there are drivers whose initial position of the hands on the steering wheel is in the “10-2” position. In the recent past, this was the most correct option. This is true for car models of the seventies, eighties of the last century. However, today it is such that the position of "9-3" will be more true.
Exercise "Snake" as a way to learn how to turn the steering wheel
Exercise "Snake" is practiced at the training site of a driving school.
The main mistake when performing the "Snake" - a slow ride is accompanied by a slow rotation of the steering wheel. This is absolutely wrong!
You need to turn the steering wheel on the "Snake" very quickly. The overall movement speed is quite low. Accordingly, the higher the speed of the car, the calmer and smoother the steering movement. The steering angle is also small.
The driver will hone the skills of movement at low speeds, gain sufficient knowledge about steering, the features of returning it to a straight position. Also, the motorist will form the concept of the "reactionary" "nose" of the vehicle. Its essence lies in the fact that when the steering wheel returns to its original straight position from the borderline state, the car moves for some time in the direction of a sharp turn.
Having successfully mastered the “Snake” exercise, the driver will easily overcome all other training areas at the driving school site.
On the video - the passage of the exercise "Snake":
Learning how to properly turn the steering wheel of a car is the responsibility of every road user. Only an adequate response to an acute, emergency situation, the absence of unnecessary movements and panic will help to avoid sad consequences and dents on the car. Even rescued passengers will not save the driver from repairing the vehicle, and, as you know, it costs a lot of money. Driving a car is associated only with on their own and knowledge, which should never be neglected!