Wheel bolt pattern Kia Ceed JD. Kia Rio wheel bolt pattern What is the Kia Rio bolt pattern

Surely you will agree that the car will look much better if it has wheels of the original design. That is why many motorists seek to replace regular disks on others - more perfect and attractive. However, in this kind of tuning, you need to carefully approach technical parameters wheels. The main characteristic that you need to pay attention to is bolt pattern. In this short article, you will learn the bolt pattern rims popular car Kia Sid different years of release.

Almost the first cars we saw mass production and fell in love with the domestic motorist. They were produced with two wheel diameters:

The above data refer to machines that are equipped with engines:.

Drilling Kia Ceed 2010

This year the car was subject to modifications and some changes. Cars of this period are quite popular and common in the territory. Russian Federation and not only.
Completed this year with the following wheels:

1. R15 with tire size 195/65, while the offset of the disk is 47 mm., And its size is 15x5.5.
2. R16 with a tire size of 205/55, while the offset of the disc is 51 mm., And the size is 16x6.5.

The above data also applies to models that are equipped with engines: 1.4L; 1.6 CDRI; 1.6L; 2.0L crdi.

All other variants were produced with the following characteristics:

• Wheel size 15x6.0, offset 45mm, tires 185/65R15;
• Wheel size 15x6.0, offset 45mm, tires 195/65R15;
• Wheel size 15x6.0, offset 45mm, tires 205/60R15.

For all specified configurations bolt pattern is 5×114.3

Drilling Kia Ceed 2013

The line has improved, but the production of cars this year was made with only two engine options:

1. Kia Sid 1.4
2. Kia Sid 1.6

The first option was equipped with wheels with a disc size 15x6.0, departure 45 and tire size 195/65R15.

The second option is the size of the disk 16×6.5, departure 46 and tire size 205/55R15.

Both configurations have a bolt pattern equal to 5 × 114.3.

It is worth noting that all cars of this model of different years of production have the same drilling (5 × 114.3), so it is almost impossible to make a mistake in its selection. The only thing you need to pay attention to is the tire sizes and other parameters.

Drivers who decide to change wheels need to accurately calculate the ratio of mounting bolts to rim diameter. You can measure the ratio yourself (using a special device) or use ready-made data for a specific model.

Indicators that affect the correct installation of the wheel:

• Number of incisors (LZ);
• Distance between holes;
• The diameter of the arc on which they are located (PCD);
• Central window diameter (DIA);
• Departure (ET).

What is disk bolting?

Razboltovka is determined by the ratio of the bolts with which the discs are attached to the full diameter of the circle. According to the standard, the ratio of 5 to 112 is considered to be the norm. Accordingly, the first digit is the indicator of the bolts, and the second is the wheels where the bolts are attached. For each individual car, it is customary to calculate the bolt pattern separately, taking into account the number of bolts, diameter and other factors.

To perform calculations, you need to know the dimensions of the wheels. Disks can be classified according to the following criteria:

• The width of the rim (ensures the reliability of the support).
• Departure (or ET).

Bolt pattern on Kia Rio 1

The first Kia model became very popular due to its ease of operation, durability, and increased comfort. Kia Rio less popular than models of 2 and 3 generations, but still on Russian roads sometimes occurs.

To transform the Kia Rio, you can replace outdated wheels with a set of brand new ones, or follow an unconventional path and purchase tires with a larger diameter and a different design. The car will look much more spectacular and brighter. When choosing a new "shoe" for Kia, pay attention to the following indicators:

• Rim size;
• Razboltovka;
• Departure.

Kia Rio I models have one common feature regardless of the year of manufacture - the bolt pattern is 4 per 100.

Wheels 4 to 98 for Kia Rio 1 are sold much less frequently. To accurately determine the diameter, you should look at the instruction manual that came with the machine. A slight discrepancy can lead to technical problems as well as increased fuel consumption.

Models produced between 2000 and 2005 have a circumference of at least 15-16. For some car options, drivers purchase a 17 diameter, but always in combination with a low-profile tire.

The hole in diameter should not exceed 54.1 mm.

Razboltovka on Kia Rio 2

The bolt pattern of 2nd generation models, which were produced from 2005 to 2011, is typical for Kia.

The width of the factory disk is in the range from 5.0 to 6.5.

DIA does not change - 54.1 mm.

Bolt pattern on Kia Rio 3

Disks of the 3rd generation model are endowed with a special marking - to make it easier for the consumer to find the right option. For example, on modifications of 2013 - 2014. there is the following inscription "6J R15 PCD 4x100 ET48 DIA54.1". The user immediately understands that the width of the disc is 6 inches, and the radius is 15. The second block indicates the European standard, which determines the number of bolts and the size of the circle itself.

The bolt pattern of Kia Rio 3 is almost the same as that of Kia models of other generations. Year of production 2012 - 2016.

Disc size - from 14 x 5.5 to 17 x 5.5.

The ratio of fasteners to the circumference is the same - 4 to 100.

ET in the range of 40 to 50.

The size of the bolts is 12 x 1.5.

Bolt pattern on Kia Rio 4

4th generation models are the latest. Year of issue - 2017-2018.

Tire markings are as follows:

• 6Jx15 PCD 4x100 ET48 DIA54.1
• 6Jx16 PCD 4x100 ET52 DIA54.1

Let's try to decipher the markings:

• Tire circumference - 15-16.
• Diameter central hole, like the "brothers" - 54.1 mm.
• Thread or fasteners - 12 x 1.5.
• Standard departure from 48 to 52.
• "Drilling" has not changed - 4 per 100.

The bolt pattern on the Kia Rio should not differ much from the one that the car received at the factory. It is important to remember that there should be 4 bolts on a 100mm circumference. Any other proportion is not allowed.

Conclusion

For Kia Rio models of all generations, the bolt pattern and the diameter of the central hole remain the same. Disc sizes and offsets vary. The number of holes and bolts also depends on the generation.

The Kia Rio car began to gain popularity in our country since the early 2000s, and until now it remains one of the most practical sedans successfully sold in the B class. Thanks to pricing policy Korean company, queue for Kia cars Rio lined up serious. Especially the 2013,2014 models that received new body. Therefore, it is not surprising that a huge number of cars of this model roam the streets of our cities. To each Kia owner Rio wants to make its car stand out from hundreds of others.

Therefore, more and more drivers are turning their attention to the shallow external tuning, and in particular to replace regular disks. Everything seems to be simple - took it and replaced it. But it turns out that bolting the wheel disks on the Kia Rio and replacing them with more original ones is not an easy process.

Determination of wheel parameters

Factory performance for wheels kia Rio

When choosing wheels for the wheels of your car, first of all, you should pay attention not to their attractive appearance, but on a number of parameters that they must comply with. The main value has always been the bolt pattern of the rims. But first you need to know exactly the dimensions and not get confused in the markings. In principle, everything is simple. All discs have a standard marking that matches their parameters. All cast and stamped wheel disks have the same standards. Factory performance for wheels Kia Rio, depending on the modification, are indicated in the table.

Automobile Kia Rio 2013, 2014 has a disk in the database with the following parameters, which are encrypted in such a marking - 6J R15 PCD 4x100 ET48 DIA54.1. This set of numbers and Latin letters says the following:

• 6 - disk width, inches. (parameter B);
• 15 - disc diameter, inches. (parameter D).

PCD 4x100 - indicates the number of holes and the diameter of the circle along which their centers are located. Actually, this is what is called a bolt pattern. Kia Rio has 4 bolts with a diameter of 100mm. This parameter according to the European standard is marked as PCD (Pitch Circle Diameter).

ET48 - disc offset, indicated in millimeters. This parameter is measured between the mating surface of the disc and the center of the disc in width. If these planes coincide, then the offset of the disk is zero. According to the European standard, the Kia Rio disc has a positive disc offset of 48mm. English manufacturers designate this size as “offset”, and “deport” is its French designation.

Removing the disc, just like the bolt pattern of the wheel disc, is a key factor when installing a new disc. If the new disc has a negative parameter, then most of the wheel protrudes outward and will touch the wheel arch when cornering. If the value of this parameter is too high, installation of the disk will be impossible, since the supports and suspension arms simply will not allow it to be installed.

Definition of bolt pattern

The bolt pattern of a standard Kia Rio disk is quite easy to determine on your own. Determining the number of holes will not be difficult even for a preschooler. Ria has 4 of them. The diameter of the circle on which they are placed (the PCD parameter) is not so easy to find out, but it is very possible. If you use the diagram below, then determining the bolt pattern will take less than a minute. Here she is.

Bolt pattern determination scheme

From this scheme, everything is extremely clear, except for the value N. The center-to-center distance of the holes is determined very simply. We measure the distance between the walls of the adjacent holes with a caliper and add the diameter of the mounting hole to this size. Using the simplest formula shown in the diagram, we get the size of the PCD, which we call the bolt pattern.

But you should not treat such a concept as wheel bolting lightly, as it directly affects traffic safety and technical condition. Kia Rio. Judge for yourself. If you deviate from the value of the exact bolt pattern, then the wheel will not be installed accurately along the axis, which will lead to insufficient bolt tightening torque. Visually, you can not notice this, and the consequences may not be the most pleasant. A mismatch in the parameters can cause a barely noticeable runout of the wheels, which will eventually disable the suspension parts of your Kia Rio. Excessive vibration can have a bad effect on the steering mechanism.

If you decide to replace the standard disks with the original ones you like, pay attention not only to what their bolt pattern is, but also to the material from which the disks are made. They must be strong, light and the manufacturing company must not raise doubts about the quality of workmanship.

look interesting video on this topic

If non-standard wheels are installed on the car, this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. So, correct selection wheels are an important element.

Wheel bolt pattern

On the Kia Rio different generations used different wheels. Usually this information is indicated in the service book, or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires fit.

Characteristics

Consider the wheel bolt pattern for Kia Rio according to the manufacturer's data by year of manufacture and generation:

Wheel disk.

Parameters of disks Kia Rio:

PCD 4×100 diameter 13 to 15, width 5J to 6J, offset 34 to 48. Similar to Honda Fit III (GE) 1.2 2018. Tire sizes from 13 to 15, width from 175 to 195 and profile from 60 to 70. Minimum tire size: 185/65R13, maximum: 185/65R15.

Wheel breaking.

Conclusion

As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore a car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.

If non-standard wheels are installed on the car, this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. Therefore, the correct selection of wheels is an important element.

Wheel bolt pattern

Different wheels were used on Kia Sid in different generations. Usually this information is indicated in the service book, or technical documents of the car. Also, each vehicle has a plate that says which wheels and tires are suitable.

Kia Sid wheels.

Characteristics

Consider the wheel bolt pattern for Kia Sid according to the manufacturer's data by year of manufacture and generation:

Selection of wheels.

Wheel parameters Kia Cee'd (JD):

PCD 5×114.3 diameter 15 to 16, width 6J to 6.5J, offset 45 to 51. Similar to Kia Cee'd SW (JD) 1.6 CRDi 128 2018. Tire size 15 to 16, width 195 to 205 and profile from 55 to 65.

contingency Kia wheels Sid.

Conclusion

As you can see, a lot of tires and wheels are suitable for Sid, and therefore a car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.