Engine oil for Mitsubishi. Mitsubishi original engine oil: overview, specifications, customer reviews Mitsubishi engine oils are good

Motors Genuine Oil is developed Mitsubishi specialists Motors Corporation for Mitsubishi vehicles.

All special fluids and oils undergo a long series of tests to determine their compliance with international quality standards and the concern's internal requirements. After all laboratory tests have been carried out, Mitsubishi Genuine Oil motor oils and special fluids receive the necessary recommendations for use.

Mitsubishi Genuine Oil products comply with international quality classes. It consists of modern additive packages and high quality synthetic components that ensure efficient operation of the engine throughout the entire period of operation.

All Mitsubishis are classified as low viscosity, energy efficient oils designed to save fuel and maintain high performance over the entire temperature range.

Innovative synthetic components with a high viscosity index included in the composition of motor oils make it possible to achieve viscosity retention that is unchanged over a wide temperature range, even at an initially low level of production.

Lubricant production technology

The base oil, or lubricant, for automotive lubricants is produced by Japanese oil refineries from oil produced by subsidiaries of Mitsubishi Motors. During primary processing, the produced oil is separated into heavy and light fractions: kerosene, diesel fuel, gasoline and ethylene.

Tar and gas oil are considered the heaviest in the composition of oil. A few decades ago, both substances were completely burned, but today they are re-distilled and purified through catalytic hydrocracking and hydrotreating technologies. The output is a colorless liquid without third-party harmful impurities with quality characteristics that are as close as possible to a real synthetic lubricant.

Any additives can be added to the base oil, it does not react with seal materials, it is easily mixed with mineral oils, allowing the creation of semi-synthetic lubricants.

Despite the fact that Mitsubishi motor oils are classified as synthetic lubricants of the VHVI or HC categories, not all hydrocracked oils can be classified as synthetic: manufacturers of PAO synthetic oils, as a rule, consider them mineral or semi-synthetic. Such an assessment is valid only in relation to the origin of the composition, but not its characteristics.

The composition of motor oils

Lubricants for automotive engines for the most part include the following three components:

• The basic basis of a synthetic, mineral or semi-synthetic type.
• Viscosity modifier that regulates the level of oil viscosity in a certain temperature range.
• A package of additives that give the base oil certain properties.

Mitsubishi engine oil 0W30 SAE

Synthetic lubricant of high quality with excellent wear-resistant and energy-saving properties. Has certificates of conformity to quality classes ILSAC GF-5 and API SM.

Minimum Mitsubishi 0W30 4l provides the following benefits:

• Reduced fuel consumption and increased Engine efficiency. Due to the low viscosity of Mitsubishi oil, many times less energy is spent for pumping it through oil system, unlike classic motor oils with high viscosity.
• Possibility of cold start of the engine. The synthetic base components and high-performance additives that make up the oil keep the viscosity of the composition unchanged at low temperatures, which eliminates problems with starting the engine in the coldest winters.
• High level engine protection. The fast circulation of low-viscosity oil through the powertrain system allows you to effectively lubricate, remove excess heat and clean the most inaccessible engine components. Innovative additive packages provide excellent protection of friction surfaces by forming oil films on them.
• The manufacturer recommends the use of lubricant in gasoline engines different Mitsubishi models: Grandis, Colt, Lancer, Pajero IV, Pajero Sport, ASX, Outlander.

Mitsubishi SAE 0W20 engine oil

Synthetic oil of high quality with energy saving characteristics. Complies with internationally accepted quality standards ILSAC GF-5 and API SM.

Oil Mitsubishi SAE 5W30

It has all certificates confirming that the oil complies with ILSAC GF-4 and API SM/CF standards. High-quality engine oil with energy-saving properties can be poured into diesel and gasoline engines of all Mitsubishi vehicles.

Mitsubishi Motors ATF SP III Fluid

special liquid for automatic transmissions installed on Mitsubishi vehicles. Complies with all requirements specified in the specific Mitsubishi model manuals.

Synthetic liquid for automatic boxes transmission has the following advantages:

• Resistant to corrosion, oxidation and temperatures.
• Does not form foam.
• Prevents valve seizure.
• Excellent shear stability and temperature-viscosity parameters.
• A high level of fluidity at low temperatures and excellent pumpability properties ensure smooth and easy gear shifting at any temperature.
• Compatible with all types of seals, does not enter into chemical reactions with them.
• High thermal conductivity.
• Excellent
• High torque capacity compared to similar transmission fluids other manufacturers, which guarantees the high performance of Mitsubishi vehicles.

SAE 5W30

High quality motor oil, 70% mineral HC-synthetic and 30% synthetic. Until 2015, it was produced in accordance with ILSAC GF and API SM / CF standards, however, since 2015, the quality characteristics of engine oil have been significantly improved, thanks to which the lubricant has received GF-5 and SN certificates. The oil has an optimal price-quality ratio. Mitsubishi engine oil contains virtually no phosphorus, making it compatible with modern exhaust aftertreatment systems. Can be used in 1990 diesel engines and 2004 gasoline engines. Has been adapted to diesel fuel with a large amount of sulfur in the composition.

DiaQueen SL Super 10W30

It belongs to the category of both semi-synthetic and synthetic motor oils due to its hydrocracked base. The lubricant is intended only for turbocharged and atmospheric gasoline engines, including those with a GDI injection system, and can be used throughout the year. Such characteristics allowed her to receive the SL category according to the American API classifier. The composition of the oil includes effective antioxidant and detergent additives, which increases the operational interval between replacements.

Fully Synthetic SAE 5W40

Universal Motor Mitsubishi oil synthetic type. Conforms to the SM / CF classes according to the American API standard. It has all the characteristics and benefits of synthetic lubricants. Compared to HC-synthetics, it has a longer service life. With regular use eliminates vibration, noise and premature wear of engine components.

DiaQueen SAE 0W20, 5W20, 5W30

A line of Mitsubishi synthetic motor oils, which is popular among car owners. According to the API and ILSAC classifications, it has the highest category after the changes made to the composition in 2015; previously complied with SL/GF standards. Automakers recommend a lubricant for use in the latest engine modifications. Motor oil compatible with all aftertreatment systems, can be used in turbocharged and multi-valve engines with direct injection system. It has excellent energy saving characteristics.

Enigine Oil 0W20 SM

Mitsubishi SM X engine oil based on catalytic hydrocracking technology. It has an excellent level of viscosity, which ensures the preservation of viscosity parameters over a wide temperature range. It freezes at a temperature of -36 degrees, can be used in difficult climatic conditions. Low volatility, the proportion of sulfur in the oil does not exceed 0.2%.

Performance SAE 5W40

Mitsubishi engine oil for diesel engines with or without turbine. It is a product of base oil hydrocracking. High fluidity allows the lubricant to protect the engine when operating in extreme temperature conditions. Keeps all properties throughout the long operational period.

Diamond Evolution SAE 5W30

Lubricant based on hydrocracked oil. Can be used in diesel and gasoline engines Mitsubishi cars equipped with a soot filter and a pump nozzle. All-weather original oil that retains operational properties under various loads and operating conditions.

Lubrolene SM X SAE 10W30

All-weather high-quality Mitsubishi SM X engine oil designed for gasoline power units. Forms an oil film on the surface of rubbing parts, eliminates premature engine wear, prevents the appearance of deposits and traces of corrosion on the main components of the motor.

It is difficult to overestimate the value lubricants for car engine. Thus, Mitsubishi engine oil, manufactured by one of the most famous automakers in the world, effectively extends the “life” not only of vehicles of this popular Japanese brand, but also power plants of machines of other world brands.

With today's wide variety of these products, the specific qualities and functions that engine oil manufacturers endow with motor oil are of great importance. Consider the features of oils Japanese company and its most common products. What are genuine Mitsubishi oils?

This company, along with the production of popular cars, pays much attention to the creation of high-tech lines of lubricants for engines. Thanks to this, universal products have been created that are equally successfully used both in Mitsubishi cars and in cars from other manufacturers. The quality of lubricating fluids, in particular, is affected by the fact that the creation of a new family of oils and special fluids is accompanied by lengthy tests.

Thus, each engine oil is tested not only against in-house criteria Mitsubishi quality Motors Corporation, but also to the most stringent global standards. The production program of the Japanese company includes the creation of all three main types of engine oils - mineral, synthetic and semi-synthetic.

Mitsubishi Synthetic Oils

Synthetic oils are lubricants, which are produced on the basis of the synthesis of various chemicals. Thanks to the specified parameters, such engine oil receives certain properties necessary in certain operating conditions. car engine. Compared, for example, with mineral oils, "synthetics" have a number of advantages. In particular, it has greater fluidity.

For this reason, synthetic materials remain on the surfaces of engine parts and assemblies much longer, which leads to a decrease in friction between them and, as a result, to an increase in the power of the entire unit and a decrease in fuel consumption. Besides, synthetic oils Mitsubishi brands are characterized by a fairly low pumping temperature (reliable engine operation at relatively low temperatures) and a high evaporation temperature (reduced oil sensitivity to overheating).

The use of Motors Genuine Oil SAE 0W30 SM will reduce wear on engine parts

Also, "synthetics" from a Japanese company for a long time is not subjected to oxidation and waxing. Currently, the following synthetic original oils are the most common.

1. Motors Genuine Oil SAE 0W30 SM. It's an oil that matches the grades API quality and ILSAC, features outstanding anti-wear performance. Low viscosity provides increased engine efficiency and economical consumption of automotive fuel. The presence of modern synthetic components and additives in its composition contributes to an excellent "cold" start of the motor. The car starts easily even at very low temperatures.
2. Genuine Oil SAE 0W20. Energy-saving "synthetics" of high quality. Quality classes: API and ILSAC. It is optimally suited for use on such models of the Japanese auto company as Pajero IV, Pajero Sport, ASX, Outlander, Lancer, Colt, Grandis.
3. Protection SAE 10W-40. It is produced on the basis of hydrocracking oil. It is used in both gasoline and diesel power units (with and without turbocharging) of the Mitsubishi brand.
4. Engine Oil Fully Synthetic SAE 5W-40 SM/CF. Fully synthetic motor oil for all-season use. It is used in gasoline engines and diesel engines manufactured by Mitsubishi. Due to the increased wear-protective properties, this lubricant significantly increases the life of the motor. With its regular use, various noises and vibration of the motor are noticeably reduced.

Mitsubishi Performance SAE 5W-40 is suitable for gasoline and diesel engines

1. Performance SAE 5W-40. Applied in gasoline internal combustion engines And diesel units both turbocharged and non-turbocharged. Produced using base oil hydrocracking technology. It provides excellent engine protection at very low temperatures, which is facilitated by the programmed high fluidity of the oil in frosty weather conditions. Moreover, it shows all its advantages for quite a long time.
2. Diamond Evolution SAE 5W-30. The basis of the lubricant is hydrocracked oil. Scope of application - gasoline and diesel power plants of cars. It can also be used in engines equipped with a pump-injector and a soot filter. Almost all-weather original oil, which has proven itself when the engine is running under a variety of loads.
3. Motor Oil SAE 0W-20SM. Oil quality classes API and ILSAC. It is mainly used in gasoline engines of Pajero IV, Grandis, Pajero Sport, ASX, Lancer, Outlander and Colt models.
4. Clear Tec SAE 0W-20. "Synthetics" of the highest quality level. Designed for use in passenger car engines.
5. DiaQueen Diesel 5W-30 DL-1. original oil brown color for diesel power plants of cars of the Japanese brand. It fights well with carbon deposits, effectively prevents the occurrence and spread of corrosion. Acts as an excellent cleanser.
6. DiaQueen 5w20SL. The specified oil is optimal for operation at low temperatures and has excellent washing characteristics. Good antioxidant. With it, the car starts easily, and the engine runs reliably. Demonstrates high efficiency in fairly old motors.
7. DiaQueen 5W30SM GF-4. Developed specifically for Mitsubishi turbocharged petrol and diesel engines. Conforms to API and ISLAC quality standards. Has good protivonagarny, anticorrosive and washing properties.
8. Dia Queen Motor Oil SAE 0W-20 API SN/GF-5. Energy-saving all-weather motor oil. Synthesized on the basis of hydrocracking. Guarantees easy start and reliable operation of the engine in almost any weather. Scope of application: mainly in Mitsubishi vehicles manufactured after 2001. This oil is recommended to be replaced every 10 thousand kilometers.
9. DiaQueen 0W20SM/GF-4. Applicable at any time of the year. It performs especially well at low temperatures. With its help, easy starting of the engine and reliable operation of the mechanism are ensured.

Mineral and semi-synthetic oils manufactured by Mitsubishi

Mineral motor oil is produced by the refining and distillation process of crude oil. For this reason, it is sometimes called oil. Among the mineral products of the Japanese auto company, the following items are most popular.

DiaQueen 5W-30 SJ is perfect for car use in winter

1. DiaQueen 5W-30 SJ. The presented liquid differs in optimum working low-temperature properties. High quality grease has good cleaning properties. Excellent antioxidant. With it, the car starts quickly and easily, and the engine is highly reliable.
2. DiaQueen Diesel 10W30 CF-4. This multigrade oil is intended for filling the lubrication system of Mitsubishi turbocharged diesel engines. Produced by hydrocracking. Interferes with occurrence of a deposit and corrosion.
3. DiaQueen 10W30 SJ/CF. Original oil with a well-balanced set of additives. Guarantees excellent performance properties of gasoline engines equipped with a GDI injection system.
4. DiaQueen 10W30SL. Mineral oil designed for use in gasoline engines with GDI injection system. Meets ILSAC and API quality standards.

The semi-synthetic type of oils are liquid materials created by mixing mineral and synthetic bases. This results in an oil that has improved performance (compared to mineral oils), but is not as expensive as synthetic oils.

Universal lubricant for different types of motors

Basically, "semi-synthetics" is used in a fairly temperate climate and at medium engine loads. Such products are very popular.

1. Engine Oil Semi-Synthetic SM/CF SAE 5W-30. Universal oil, equally applicable in both gasoline and diesel power plants. Significantly extends the life of the motor, reduces the level of vibration.
2. Lubrolene SM-X SAE 10W-30. All-weather motor oil of high quality. Designed for use in gasoline engines. Quickly and effectively lubricates moving parts, thereby reducing the risk of rapid wear. Prevents harmful deposits and corrosion on the internal parts of the engine.

What should be considered when using engine oil? For long-term operation of the engine, it is necessary to use engine oil only recommended specifications. Front long trip and at certain intervals it is necessary to check the oil level in the engine.

We must always remember that the amount of lubricant consumed directly depends on the load on the car, the crankshaft speed, and the nature of driving. Bad roads, driving in high mountains, over rough terrain and other adverse operating conditions of the machine adversely affect technical parameters lubricants. This use of automotive technology involves frequent oil changes.

Considering all the features of motor oils and choosing the most suitable one, any driver can easily provide his car with excellent service and long service life of its power plant.

The Mitsubishi Outlander lineup was introduced in 2001. Then the first generation of the mid-size crossover became available in Japan under the name Airtrek, and only 2 years later the model reached the European and North American markets. The Outlander was created on a common platform with the Citroen C-Crosser and Peugeot 4007 and was equipped with 2 diesel and 3 petrol power plants different power. Next, we will talk about what kind of oil and how much was poured into them.

In the first generation, the Outlander received 2.0 and 2.4-liter units with 136 and 160 hp, which in 2004 were supplemented by a 2-liter turbo engine with 201 hp. Despite the existence of front-wheel drive modifications, Outlander I was supplied to the domestic market only with all-wheel drive. Generation II (known as XL in the Russian Federation) was produced from 2006 to 2013. During this period, the SUV became a little stronger: in the basic version, it was equipped with an engine with a displacement of 2 liters (148 hp), and the 2.4-liter version already had 170 hp. In 2009, the second generation Outlander was updated, it was limited to only some cosmetic changes. Geneva Motor Show 2011 opened new page in the history of the SUV, showing the world its third generation. popular car retained its original dimensions, received a redesigned front panel and several new options in the interior. After restyling in 2014, the SUV got a modified grille and better sound insulation, and the appearance became more embossed. The line of gasoline engines is represented by traditional units with volumes of 2.0, 2.4 and 3.0 liters (118-230 hp) and a 2.2-liter diesel (150 hp).

Mitsubishi Outlander III was originally adapted to Russian roads and climate and was delivered to Russia with old B-series engines (to Japan - J-series). With the same volume, the power of domestic models was lower by several hp.

Generation 1 (2001 - 2008)

Mitsubishi 4G63 engine 2.0 l. 136 HP

Mitsubishi 4G63T 2.0L engine. 201 and 240 hp

• What engine oil is poured from the factory (original): Synthetic 5W30
• , 5W-40, 5W-50, 10W-30, 10W-40, 15W-50
• How many liters of oil in the engine (total volume): 5.1 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7000-10000

Mitsubishi 4G64 2.4L engine. 139 HP

• What engine oil is poured from the factory (original): Synthetic 5W30
• Oil types (by viscosity): 0W-40, 5W-30, 5W-40, 5W-50, 10W-30, 10W-40, 10W-50, 10W-60, 15W-50
• How many liters of oil in the engine (total volume): 4.0 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7000-10000

Mitsubishi 4G69 2.4 l engine. 160 HP

• What engine oil is poured from the factory (original): Synthetic 5W30
• Oil types (by viscosity): 0W-30, 5W-30, 5W-40, 5W-50, 10W-30, 10W-40, 10W-50, 15W-50
• How many liters of oil in the engine (total volume): 4.3 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7000-10000

Generation 2 - CW (2006 - 2013)

Engine Kia-Hyundai G4KD / Mitsubishi 4B11 2.0 l. 148 HP

• What engine oil is poured from the factory (original): Synthetic 5W30
• How many liters of oil in the engine (total volume): 4.1 liters.
• Oil consumption per 1000 km: up to 1000 ml.

Engine Kia-Hyundai G4KE / Mitsubishi 4B12 2.4 l. 170 HP

• What engine oil is poured from the factory (original): Synthetic 5W30
• Oil types (by viscosity): 5W-30
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7500-15000

Generation 3 - GG/GF (2012 - present)

Engine Kia-Hyundai G4KD / Mitsubishi 4B11 2.0 l. 118 and 146 hp

• What engine oil is poured from the factory (original): Synthetic 5W30
• Oil types (by viscosity): 5W-20, 5W-30
• How many liters of oil in the engine (total volume): 5.8 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7500-15000

Engine Kia-Hyundai G4KE / Mitsubishi 4B12 2.4 l. 167 HP

• What engine oil is poured from the factory (original): Synthetic 5W30
• Oil types (by viscosity): 5W-30
• How many liters of oil in the engine (total volume): 4.6 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change oil: 7500-15000

It is not always possible to buy original motor oils, so you have to look for alternative lubricants. They must be no worse than the original fluids in terms of parameters so as not to harm the engine. Certainly, ideal option there are lubricants that have tolerances on the canister, but these are not always found. Implement correct selection engine fluid can be classified by class, oil and its viscosity. This article describes the recommended engine oil for Mitsubishi Lancer.

Petrol power units

Model 1994 release

For 4G92, 4G93, 4G13 Mitsubishi Lancer engines, the car manufacturer recommends using SG class motor oils according to the API system. The viscosity of the lubricant is determined according to scheme 1, taking into account the temperature of the region in which the car will be operated.

Scheme 1. The dependence of the viscosity of the lubricant on the ambient temperature.

According to scheme 1, it is necessary to use the following lubricants:

• at a temperature index less than -30 0 C, SAE 5w-20 motor oils are poured;
• if the temperature is less than +10 0 C, use SAE 5w-30;
• at a temperature below +20 0 C pour 5w-40, 5w-50;
• in temperature conditions from -30 0 C to +40 0 C, pour 10w-30;
• if the thermometer is above -30 0 С, use 10w-40, 10w-50;
• if the temperature index is above -15 0 С, 15w-40, 15w-50 are used;
• if the air temperature is more than -10 0 C, pour 20w-40, 20w-50.

The Mitsubishi Lancer instruction manual indicates the following volumes of engine oil required when replacing:

• 3.8 l for motors 4G92, 4G93;
• 3.3 L if 4G engines

Diesel car engines

According to the Mitsubishi Lancer manufacturer's manual for 4D68 engines, it is recommended to use the CD type oil (or higher) according to the API system. It is necessary to choose the viscosity of the oil according to scheme 2.

Scheme 2. The dependence of the viscosity parameters of the oil on the ambient temperature.

• SAE 30 if the temperature range is from 0 0 С to +40 0 С;
• 20w-40 with a thermometer reading greater than -10 0 С;
• 15w-40 if the temperature is greater than -15 0 С;
• 10w-30 under temperature conditions -20 0 С to +40 0 С;
• 5w-40 if the thermometer reading is less than +20 0 С;
• 5w-30, 5w-50 at a temperature index less than +10 0 С.

The volume of engine oil required for replacement for the 4D68 engine is 5.1 liters.

Mitsubishi Lancer 7(CK,CM) 1995-2000 release

Model 1997 release

Recommended engine oil for Mitsubishi Lancer (configuration 4G92, 4G13) must meet the oil class SG or higher in accordance with API standards. to select the viscosity of the lubricant, you must use scheme 3.

Scheme 3. The dependence of the viscosity of the oil on the temperature outside the car.

Explanation of scheme 3:

• 20w-40, 20w-50 are poured with a thermometer reading over -10;
• 15w-40, 15w-50 are poured if the temperature is more than -15 0 С;
• 10w-40, 10w-50 are poured at temperatures above -30 0 C;
• 10w-30 is used if the temperature range is from -30 0 С to +40 0 С;
• 5w-40 is poured if the temperature is below +20 0 С;
• 5w-30 is used at temperatures below +10 0 C.

The volume of motor fluid required when replacing is equal to:

• 3.3 l for 4G13 auto engines;
• 3.8 l if motors 4G92;
• for oil filter 0.3 liters of lubricant is required.

Mitsubishi Lancer IX(CS) 2000-2007 release

Model year 2005

Based on the operating instructions, for a Mitsubishi Lancer car, it is necessary to use engine fluids that correspond to the parameters:

• type of car oil A1, A2 or A3 according to ACEA standards;

The choice of viscosity is carried out according to scheme 4.

Scheme 4. Influence of ambient temperature on the selection of viscosity parameters of the lubricant.

According to scheme 4, it is necessary to use such motor lubricants:

• 0w-30, 5w-30 are poured at temperatures below +40 0 С;
• 0w-40, 5w-40 are used for the temperature range from -35 0 С (and below) to +50 0 С (and above);
• 10w-30 is poured under temperature conditions -25 0 С to +40 0 С;
• 10w-40 or 10w-50 is poured if the temperature is more than -25 0 С;
• 15w-40, 15w-50 are used if the temperature is above -15 0 С;
• 20w-40, 20w-50 are used if the temperature is above -10 0 C.

The use of lubricants with a viscosity of 0w-30, 0w-40, 5w-30, 5w-40 is allowed if they have the following characteristics:

• type of car oil A3 according to ACEA standards;
• lubrication class SG (or higher) according to API standard

The maximum consumption of engine oil is 1 l / 1 thousand km. The volume of lubricant required for replacement is 4.0 liters, the volume of oil in the oil filter is 0.3 liters.

Mitsubishi Lancer X (CY) 2006-2016 release

Model year 2008

The Mitsubishi Lancer manufacturer allows the use of lubricants that meet the requirements of:

• oil class SG or higher according to API classification;
• car oil must be certified according to ILSAC;
• type of car oil according to ACEA A1 / B1, A3 / B3 or A5 / B5.

The selection of viscosity is carried out according to scheme 5 and depends on the air temperature outside the car. It should be borne in mind that the use of lubricants 0w-30, 5w-30 and 5w-40 is permissible if they comply with ACEA A3 / B3, A3 / B4 or A5 / B5 and the SG class according to the API system. Based on scheme 5, at a temperature, for example, more than -25 0 С, it is necessary to fill in lubricants 10w-40 or 10w-50, and for a temperature range from -35 0 С (and below) to +50 0 С (and above) use oils 5w-40. The interpretation of the remaining dependences of viscosity on temperature is similar to scheme 4.

Scheme 5. The dependence of the viscosity parameters of the motor oil on the ambient temperature.

The volume of engine oil in the oil pan is 4.0 liters, the volume of lubricant in the oil filter is 0.2 liters for models with 1500 cm 3 engines and 0.3 liters for models equipped with 2000 cm 3 engines.

Conclusion

The recommended engine oil for Mitsubishi Lancer contains all the necessary additives to protect the engine from wear and ensure high efficiency, so the use of any additives is unacceptable: they can react with the oil and damage the engine.

An important role in choosing a lubricant is played by the temperature outside the machine: low-fluid lubricants are poured in the summer, very liquid oils are poured in the winter. When choosing all-season motor oils, you should give preference to synthetic or semi-synthetic oils, as they have a wider operating temperature range than mineral motor oils.

Recommended engine oil for Mitsubishi Outlander Recommended engine oil for Mitsubishi Pajero

Mitsubishi launched Japan's first mass-produced car in 1917. In 1970, a division of Mitsubishi Motors appeared, which is part of the Mitsubishi Heavy Industries Corporation. Cars of the brand are sold in most regions of the world; passenger cars are the most common in Russia Lancer models, Carisma and Galant, Outlander crossovers and ASX, Pajero SUVs and L200 pickups. In 2010, the company, together with PSA, opened an assembly plant in the Kaluga region.

Since 2016, Mitsubishi Motors has been partially owned by automaker Nissan.

ELF EVOLUTION 700 STI 10W40

ELF EVOLUTION 700 STI 10W40 engine oil is produced using ELF semi-synthetic technology and is recommended for gasoline and diesel engines. Mitsubishi engines most models. It complies with API SN/CF and ACEA A3/B4 international standards and has excellent operational characteristics. This oil guarantees effective protection of the engine against wear in a wide range of temperatures, both in high temperature under high load conditions, and during cold start. Special cleaning additives prevent deposits on engine parts and keep them clean.

ELF EVOLUTION 900 CRV 0W30

Fully synthetic engine oil for Mitsubishi ELF EVOLUTION 900 CRV 0W30 has high fluidity and is recommended for brand vehicles operating in extremely low temperatures. Its viscosity characteristics facilitate cold starts and guarantee reliable lubrication and engine protection from the first seconds. The energy-saving properties of this oil for Mitsubishi reduce friction losses and, as a result, fuel consumption, and oxidation stability allows extended service intervals. ELF EVOLUTION 900 CRV 0W30 meets the ACEA A5/B5 standard and is suitable for vehicles with petrol and diesel engines, including those with turbocharging and unit injectors.

ELF EVOLUTION 900 SXR 5W30

High-quality fuel-saving oil ELF EVOLUTION 900 SXR 5W30 is produced using synthetic technology and satisfies ACEA specifications A5/B5 and API SL/CF. ELF experts recommend this engine oil for Mitsubishi with gasoline and diesel engines especially with direct injection. It is excellent for all driving modes, including engine-heavy ones such as city, sport or off-road driving, and provides a high level of protection against wear and deposits, even under extreme conditions. The high fluidity of ELF EVOLUTION 900 SXR 5W30 reduces fuel consumption, and the resistance of this oil for Mitsubishi to oxidation ensures the stability of its characteristics after long-term operation.

ELF EVOLUTION FULL-TECH FE 5W30

ELF EVOLUTION FULL-TECH FE 5W30 engine oil is designed for vehicles that meet modern environmental requirements, in particular for diesel engines equipped with particulate filter(DPF). This oil is recommended for Mitsubishi with DI-D engines equipped with a soot filter: due to the low content of phosphorus, sulfur and sulphated ash content (Low SAPS technology), it prevents filter clogging and deactivation. ELF EVOLUTION FULL-TECH FE 5W30, thanks to its high anti-wear and cleaning properties, extends the life of the engine and exhaust aftertreatment systems. According to the ACEA economy tests, the fuel consumption of this Mitsubishi engine oil is 2.1% lower than conventional.