Tires and wheels for Renault Sandero. Renault Sandero wheel bolt pattern New Renault Sandero wheel offset

To complete the popular French car Renault Sandero, the manufacturer has provided several options. rims. Among them you can see both stamped and more fashionable cast ones. The developers also do not object to the desire of owners to install drives from other manufacturers instead of standard options. The main condition is that the products comply with the recommendations of the factory. When non-original products are used, wheel bolting is required.

Today, there are a lot of services on the network that allow, with a set of standard car parameters, to provide as offers a wide range of tire and wheel options that suit the practical “Frenchman” Sandero. This is where comfortable comes to the rescue. tire calculators online, which allow the buyer to accurately select suitable options, taking into account not only design, but also geometry.

Having taken up the choice of wheels, the future owner should pay attention to the following aspects:

• performance characteristics wheels or tires;
• product quality level;
• the required amount of pressure when inflating tires;
• permissible level of maximum speed, etc.

It is not uncommon for Renault Sandero owners to tend to tuning, replacing standard tires complete with disks with brighter options in terms of design.

Regulatory parameters for Sandero

For Renault Sandero, the developers have provided for the possibility of completing with disks with the following sizes: "R14", "R15", "R16" and "R17". It is the latter option that is most often used for tuning purposes, but then wheel bolting is required.

Currently, the following manufacturers have received wide popularity:

• "Trebl" and "Kronprinz";
• "Arrivo" and "KFZ";
• "Replica", "Nitro" and "Alutec";
• "Enzo" and "Dezent".

Consider Renault in the first generation (2008-2012). For this version, the manufacturer allowed the installation of disks "R14", "R15" and "R16". All products were characterized by a hub diameter of 60.1 mm, the maximum reach varied from 30 to 50 mm. Also, the manufacturer did not disregard the recommendation for the width of the product, which, depending on the configuration, was 5.5-6.5 inches.

The second generation of Sandero was released in 2013. Here, the range of discs to be installed has changed slightly, namely: from "R15" to "R17", and the hub diameter has remained identical - 60.1 mm. Departure ("ET") in the new generation is 30-43 mm, and the width of the product is 6-7 inches.

Bolt pattern and other aspects

Such important parameter, as wheel bolt pattern, is of paramount importance when choosing discs, because it allows you to choose a product option that fits exactly with the Renault Sandero hub in terms of fasteners. In "our" "Frenchman" it has the formula "100/4". The decoding is not difficult: 4 fixing bolts and 100 mm in diameter, on which the centers of the holes in the hub and, accordingly, in the disk are located.

Bolt parameters are also individual:

• head - turnkey on "17";
• thread - M12 * 1.5.

Important! When installing alloy wheels a slightly longer bolt leg length is required (by 2-3 turns). Also, the tightening torque must comply with the requirements of the regulation.

In general, wheel bolting is not at all a complicated procedure.

Tire selection

As standard, the manufacturer uses tires with the following parameters: "165*80*R14" or "185*70*R14". This is true for a 1.4 liter engine.

If a 1.6-liter engine is installed on the Renault Sandero, then here you can see the tires "185 * 65 * R15". This option was most widely used in the second generation of the French bestseller.

Like rims, tires should be selected according to the manufacturer's recommendations and tolerances. Neglect of this aspect can lead not only to an imbalance in driving characteristics, but also to a decrease in general security on the road.

Don't forget this important regulatory parameter like the pressure inside the tires. This indicator is reflected in the manual for Renault Sandero. The owner needs to periodically monitor the pressure level and, if necessary, adjust it by pumping. This should be done on “cooled down” wheels and with a high-quality pressure gauge, and not with its cheap copy.

Now more about the pressure itself:

1. If the wheels "165 * 80 * R14" are installed, then the pressure in the front and rear tires should be 2.0 bar and have the same values ​​​​on the left and right sides.
2. For wheels "185*70*R14" the values ​​are as follows:

• before - 2.0 bar;
• rear - 2.2 bar.

3. To inflate tires "185 * 65 * R15" you will need a similar pressure:

• front - 2.0 bar.
• aft - 2.2 bar.

Summing up

We have analyzed important operational and technical specifications wheels for Renault Sandero. This information is also relevant for other models and manufacturers. Compliance with regulatory requirements is a guarantee of safety and confidence on the road, so owners are not recommended to lose sight of the points indicated in our material. And if wheel bolting is carried out, then it must be carried out strictly according to the instructions.

Tires are an integral part modern car. They allow you to move and provide the proper level of comfort. What tires are on Renault Sandero?

Today we will consider the tire sizes that are equipped with a popular budget-level car. Sandero Stepway. Let's talk not only about factory equipment, but also about options that are suitable as an alternative, What other tires are suitable for Renault Sandero.

Stock tires for Sandero Stepway

The first generation Stepway has been produced since 2014 and was equipped with a tire size of 185*65*R15. Owners consider this tire option to be “native”. It is recommended to install it on the car. On sale there are a lot of options for this size and from any manufacturer.

Alternative to standard tires Stepway

Rubber on Renault Sandero is not standard. As replacement tires, you can consider several options, which are not so many when it comes to regular disks.

The most optimal non-standard option is the size 195 * 65 * R15. Such tires are effortlessly mounted on "native" disks. Alternatively, you can consider as a candidate for replacement tire size 195 * 60 * R15. Some owners seek to slightly increase the clearance through the use of more high profile"rubbers". For these purposes, tires 195 * 70 * R15 are suitable. They also mount to factory drives without any problems.

Among the owners there are such "unique" who "shoe" their cars in tires 205 * 65 * R15. Experts do not recommend installing these tire options on the first generation Stepway for several reasons:

1. First, the cost of products increases significantly.
2. Secondly, increasing the width can adversely affect handling.
3. Thirdly, the increased mass of the wheels leads to an increase in fuel consumption and a reduction in the life of the undercarriage parts.

Such remarks are also valid for wheels with the 16th tire and wheel size. Some owners install them to improve the appearance. There are such "experimenters" who manage to install the tire size 205 * 65 * R16 on their Stepway. We do not recommend leaning towards such drastic measures, including for the above reasons.

The second generation of the French "state employee" from the factory is equipped with wheels with the 16th standard size. Here, the standard option is the tire size 205 * 55 * R16. The experience of the owners indicates that the following tire options can be installed without any problems:

• 205*65*R16;
• 195*65*R16;
• 195*55*R16.

With regards to options with even larger tire sizes, we note that here the owner is exposed to the previously indicated risks. There are many cases on the Internet when owners installed 215 * 65 * R16 tires on their cars and failed. With the wheels completely turned out, there was a grazing of the tire behind the arch.

Now consider options with a smaller size. For Stepway in the second generation, such tires and wheels can be installed without much concern. For example, options: tire size 195*65*R15, 205*60*R15, 205*65*R15 will ideally “fit” instead of standard ones.

But does it make sense? 16th wheels with tires look presentable and more impressive. Wheels with the 15th size in the huge Renault arches will be “lost” and will look inharmonious.

Summing up

As you can see, the ingenuity and penchant for experimentation among domestic owners of Renault Sandero Stepway is at its best. Some try to “pull” tires with parameters that are significantly higher than the options considered on regular disks. Others generally look towards SUVs, plunging into adventurous ideas.

However, in any case, the most optimal would be the use of such an option, which is regulated and recommended by the manufacturer. Before buying and installing tires with other parameters, we recommend that you consult with experts, study the material on online forums, where the experience of other owners will be of particular value and will favorably affect the correct choice.

And finally, you should not save on the quality of tires and wheels. Rubber on Renault Sandero is very important in terms of the safety of the driver and his companions. quality tires they will last longer and in a critical situation will allow you to keep the car on a given trajectory, which tires of dubious origin are not able to do.

Any car, including foreign cars, looks stylish and beautiful if the equipment, body parts, and interior correspond to a decent level. Renault Sandero is standardly equipped with fairly high-quality elements, but you can stand out from the general flow of cars by equipping the car with original wheels.

The range offered by manufacturers is wide, but the right choice depends on some features of the model.

Standard sizes

Renault Sandero car from the start serial production rolled off the line in 2007 fitted with 14" or 15" rims (R14, R15), stamped or light alloy options. Advanced versions of the Renault Sandero Stepway were equipped with R16 wheels. In addition to the size of the wheel rim, there is a set of other significant technical indicators:

• width;
• bolt pattern (drilling);
• takeaway;
• central hole.

The nominal width of the Renault Sandero rim of various modifications varies between 5.5 and 6 inches (symbol - 5.5 J or 6J). The value of the indicator affects the adhesion force with pavement, exchange rate stability and manageability.

Branded discs have 4 holes for mounting bolts located around the circumference of the disc at a distance of 100 mm from the central axis ( conventions parameters LZ and PCD, respectively). The full drilling designation is LZ*PCD 4x100. An important indicator is the diameter of the hole itself, it is important when choosing bolts for the disk. Factory bolts from Renault are available in 12 mm sizes. Drilling of holes is made with a recessed edge of a conical shape for a secure fit of fasteners.

Offset is the value in mm between the plane passing through the center of the rim width and the surface of the connection between the disc and the hub. The offset can be positive or negative. Production models Sanderos are available with an offset of 43-50 mm (ET43, ET 50). The French manufacturer has a positive offset, that is, the wheel is visually recessed into the wheel niche.

The central hole is a parameter that characterizes the diameter of the hub. For everything model range Renault Sandero it is 60.1 (DIA 60.1). The operation of discs with a large indicator is allowed with the use of special spacer rings. The alignment of the wheels, the reliability of the connection and the comfort when driving (no runout) depend on the correspondence of the disks to the diameter of the hub.

Characteristics of regular bolts

The wheels are fastened with metal bolts M12x1.25x25 using a special wheel wrench equipped with a dynamometer. A weak force leads to loosening and separation of the wheel, vibration during movement, strong tightening damages the threaded connection.

Bolt parameters indicate dimensions in millimeters: 12 - diameter, 1.25 - thread pitch, 25 - thread length. Standard bolts are produced with a cone-shaped seat. It is important to remember that the thread length of standard bolts is often insufficient for fastening light alloy products.

What discs can be installed

The desire to improve the car, improve the technical characteristics and appearance pushes motorists to look for alternative factory options. Stamped discs, even decorated with decorative caps, satisfy few people. They were replaced by products made of light alloys, which can be conditionally divided into 3 groups:

• forged;
• cast;
• prefabricated.

Magnesium and aluminum alloys used for their manufacture are distinguished by their lower weight, ease of removal and installation of wheels, and better technical characteristics compared to stamping. Reducing the weight of products saves fuel, contributes to the dynamics of the car. Although these models are quite fragile, they are ideal for use in urban environments.

The cast accessories shown in the photo are 20-30% lighter than stamped counterparts, heat up less when moving, and are easy to clean. However, the lack of compliance during impacts is fraught with chips and breakage of the discs.

Hot stamping forgings increases their strength and resistance, but the high rigidity forces the car's suspension to take the negative impact of a bumpy road.

The components of prefabricated models are made of materials that differ in the manufacturing method, are interconnected by titanium or metal bolts. This technology allows you to replace the damaged segment of the unit. Backlash in the joints of the constituent parts increases the flexibility of the structure.

When changing the type and size of discs, the factor of the difference in material thickness at the junction of the wheel with the hub is taken into account. There is a possibility that the length of the threaded part of the bolts will be insufficient for reliable fixation, or vice versa, they will rest against the details of the machine structure.

Selection Options

The range of wheel accessories for Renault Sandero allows you to make a competent purchase in accordance with personal priorities. In addition to design, style, aesthetic perception, it is necessary to take into account the influence of some factors:

• conformity technical specifications car. The installation of products that, with or without load, are capable of rubbing against the part of the wheel niche due to increased dimensions, leads to sad consequences;
• the ratio of external attractiveness to operating conditions. Models that require low-profile tires look good, but are not applicable for constant trips to the country with a maximum trunk load;
• the influence of the chosen model on the associated financial costs. Replacing the technological parameters of the disks (diameter, width, offset) inevitably entails the change of tires, mounting bolts;
• change in driving style. Low-profile tires, due to their greater width, improve traction with the roadway, but are more sensitive to loads when they get into deep holes on the road.

Comprehensive perception of the consequences of switching to new accessories, including the turning radius or stopping distance helps you make the right choice.

Valid parameters

The technological indicators of the disks outlined above, regardless of whether it is an outdated model or a newfangled Stepway, determine the range of acceptable models for car tuning.

The table provides reference values, individual deviations from the indicators are possible, especially on tuned versions of the car.

The drilling of Renault Sandero cars is clearly equal to 4x100. Deviation central hole to the greater side is allowed when using specialized sleeve rings. The choice of vehicle configuration option should take into account the different lengths of the threaded fragment of the bolts for the standard and individual versions of the disks used.

Financial costs, worries about the literacy of the choice of disks for Renault Sandero will pay off, bring a lot of positive emotions if elementary recommendations and a responsible approach to car modernization are followed.

Stylish rims make the look vehicle more presentable. Renault Sandero today produces an extensive list of different models of "rollers" - cast, forged, stamped. It will not be difficult to choose the right ones - it is enough to know the permissible geometric parameters, the bolt pattern.

What discs were placed on various bodies and configurations

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Renault Sandero has been produced for more than ten years in a row - from 2007 to the present day. Moreover, for all the periods listed above, the car has undergone several restylings.

A distinctive feature is the standard drilling - these are 4 holes with a distance between each of 100 mm. However, the magnitude of the departure was different:

• ET-43 - installed on cars with 5.5J × 14 discs;
• ET-40 - mounted on machines with wheel sizes 6J × 15.

The parameters listed above apply to all Sandero modifications produced in the period from 2007 to 2013. It is marked as Renault Sandero I. Already in 2013, the car "survived" restyling. Disks are installed with the following main characteristics:

• drilling, PCD - 4 × 100 mm;
• thread of mounting bolts - 12 × 1.5;
• disc overhang - 40-45 mm.

Another advantage this car– the same diameter of the central hole (DIN). It is 60.1 mm. Due to a fairly significant overhang (40-45 mm), the car has outstanding running characteristics. Sandero comes in two main versions - with gasoline engine and diesel.

However, unlike many other cars of a similar class, the type of installed rims does not differ in any way. Which greatly simplifies the procedure for choosing, installing new wheels.

Standard disk sizes

Diameters regular disks slightly different - depending on the year of manufacture and modification. Cars of the first restyling produced in the period from 2007 to 2013 were equipped with regular disks of the following types:

• 1.4 L (74 hp) petrol engines - 14" diameter and ET43 offset;
• 1.6 L (101 hp) petrol engine - 14" or 15" diameter and ET40/ET offset

In addition to those listed above, various alternatives can be installed. It is only important to remember the need to use only recommended modifications. When installing too large discs, fender liner and some other structural elements may be damaged.

The dimension also differs - depending on the type of engine, some other parameters. For gasoline engines with a capacity of 74 hp. the size of the disk is standard - 5.5J × 14. Slightly different characteristics are installed on machines equipped with 1.6-liter gasoline engines. 101 hp For different diameters, different dimensions are defined:

• 5.5J×14;
• 6J×15.

It will be necessary to familiarize yourself in advance with all the subtleties, design features of the disks - before acquiring new ones. The characteristics of the wheels installed on the Renault Sandero, produced since 2013 with a gasoline engine and a power of 74 hp, are as follows:

• diameter - 15 inches;
• dimension - 6J × 15, ET-40;
• departure - ET40.

Slightly different dimensions for discs installed on a car with a 1.6-liter gasoline engine and 101 hp:

• 6J×15;
• ET-40.

Drilling and the size of the central hole are completely identical. This greatly simplifies the procedure for choosing wheels for a car.

Standard nuts parameters

It is important to note that cast, forged and stamped wheels are held in place by the same bolts. It is worth noting: it is important to use only models that are suitable for the design. Otherwise, the wheel may not stand up straight, any play will occur. In some cases, the bolts may need to be slightly longer. For example, when using certain types of alloy wheels.

The photo below shows that the bolts are recessed to a depth of 5-8 mm. This situation leads to a decrease in the working surface of the thread. This reduces the reliability of the connection. Moreover, the disks on the front and rear wheels ah a little different. First of all - the number of threads. There are only 7 turns on the front wheels. At the same time, there are only 12 such turns on the rear wheels. The reason for this is the load on the axles. It is not distributed evenly - which leads to the need to use bolts of different lengths. Fasteners for the front and rear wheels differ even visually.

On standard disks, it is necessary to tighten the bolt by at least 7 turns. If there are only 6 turns, this is not enough. This leads to an increase in the taper of the base. As a result, less tight contact. Consider 3 main types of bolts:

• regular - their length is 25 mm or more;
• new - these are supplied with Replay discs and have a thread length of 26 mm;
• workers - thread length is 28 mm.

Acquainted with appearance such bolts can be seen in the photo below:

It is worth noting: the protruding part of all the bolts presented above varies significantly. On a regular one, it is only 18 mm. At the same time, it is screwed in only 5 turns. New bolts sold in stores, with a length of 26 mm, have a protrusion of 21 mm. At the same time, it is screwed in 7.5 turns. The working bolt has a thread length of 28 mm - it protrudes 23 mm. Screws in only 9.7 turns.

Important to note: stock bolts are not suitable for installation on the front wheels. Over time, they wear out, the wheel begins to roll in a figure eight. For each disc, it will be necessary to select a bolt with a certain number of turns on the thread.

Their number depends on the following factors:

• the length of the bolt itself;
• base taper;
• drowning of the reciprocal thread for the bolt in the hub;
• cast disc departure.

The optimal solution is to change the length of the protruding part on the removed disk by inserting a bolt. The length must be at least 20 mm. On the installed disk, the bolt must be tightened at least 6 turns.

What discs can be installed

It is allowed to install discs of non-standard diameter on Renault Sandero. For example, for cars manufactured before 2013, it is possible to install wheels of the following sizes:

A slightly larger selection is present in cars of the second version:

Radius R16 will become the best option. Similar wheels are installed on the Renault Stepway. Acquainted with available options can be from the photo.

Maximum and minimum possible parameters of non-standard disks

The maximum allowable dimensions for non-standard drives differ depending on the year of manufacture of the vehicle. For cars assembled from 2007 to 2013, the following is allowed maximum size wheels:

• tire width - 215 mm;
• tread height - 45 mm;
• wheel diameter - 17 inches;
• disc dimension - 7J × 17;
• departure - ET40;
• drilling - 4 × 100.

For cars produced from 2013 to 2019, it is allowed to install wheels with the following maximum parameters:

• wheel dimension - 215 / 45R17;
• dimension - 7J × 17;
• ET-40.

Before buying and installing disks, you should definitely make sure they are compatible. Otherwise, there may be any problems, difficulties. Discs that are too large cause damage to the fender liner and premature exit wheel bearing failure.

Popular cars Renault Sandero, depending on the configuration, is available with cast or stamped rims. In addition to factory parts, it is also possible to install products from other manufacturers recommended by the French automobile manufacturer. Today, on specialized Internet sites, you can find many services that, when entering full factory information about the car, provide a wide selection of tires and wheels suitable for a particular car. Also popular are the so-called tire calculators, which not only select suitable commodity items (winter or summer) for a specific car model, but also inform about the approximate cost of one set.

Of course, when choosing wheels, it is necessary to be guided by the level of their quality, take into account performance characteristics, acceptable performance top speed and pressure, indicators of winter tests in case of searching for kits for the cold season. In addition, the described accessories may also have a decorative connotation. Tuning Renault Sandero in most cases involves replacing standard wheels and tires with products from well-known brands that specialize in the production of just such parts.

Valid parameters

On Renault Sandero, regardless of the year of manufacture, it is allowed to install disks of such diameters as R "14", R "15", R "16" and R "17". The latter option is used for a thorough tuning of this car. The table below contains detailed information on factory sizes and alternative wheel options for Renault Sandero, which are installed / allowed by the manufacturer:

It is worth noting the most popular trademarks of 2015, under which cast and stamped products for Renault Sandero are produced. These should include such famous brands like Trebl, Kronprinz, Arrivo, KFZ, Replica, Nitro, Alutec, Enzo, Dezent and many more.

So, on Renault Sandero of the first generation (release from 2008 to 2012), it is allowed to install disks with a diameter of 14-16 (R "14", R "16"). In this case, it should be taken into account that the diameter of the hubs is 60.1 mm, and the maximum reach (ET) is allowed in the range from 30 to 50 mm.

Renault Sandero models of the second stage, which have been produced since 2013, have the same hub diameter (60.1 mm), and the allowable diameter of these accessories (R) is 15-17 inches. Departure indicators should be in the range of 30 - 43 mm. The manufacturer's recommended width is 6-7 inches.

It should be noted that there are cars from other manufacturers that have similar selection parameters and parts of which may fit a Renault Sandero car. An example is japanese car Toyota Yaris.

Bolt and Bolt Configuration

Drilling means those parameters that characterize the features of fastening the disk to the hub. Renault bolt pattern Sandero has a score of 100/4. This means that the fastening provides for the presence of 4 bolt holes, the number 100 indicates the diameter of the circle on which the bolts are located in millimeters.

Bolt parameters are also individually defined. The head of the bolt has a diameter of 17 mm, its thread has the characteristic M12x1.5. It is worth noting that when installing alloy wheels, the bolts should be somewhat longer, on average by 2-3 turns of thread, and when tightening them, observe the allowable tool pressure on the connection. The selection of these accessories should be carried out on an individual basis.

Tire selection

Regular parameters of winter and summer wheel tires on the Renault cars Sandero of the first generation with an engine capacity of 1.4 liters is 165-80 R "14", 185-70 R "14". 185-65 R 15 tire options were added to the 2015 models, which were equipped with a 1.6-liter gasoline engine. The second generation of these cars were equipped with 185-65 R "15" tires.

Careful selection of the described tires (regardless of winter or summer) should be carried out taking into account exact compliance with the dimensions and parameters allowed by the manufacturer, depending on the modification of the car and its year of manufacture. Deviations in the permissible parameters of parts are fraught with a decrease in the level of safety when driving.

The Renault Sandero instruction manual regulates the permissible tire pressure. It is worth noting that the pressure test must be carried out only on cooled wheels using a special tire pressure gauge. At the same time, the nominal indicators differ depending on the dimension of the wheels. So, with sizes 165-80 R 14, the pressure in the front and rear tires should be 2.0 Bar, 185-70 R "14" - 2.0 Bar in the front and 2.2 Bar in the rear, 185-65 R "15 » - also 2.0 and 2.2 bar.

Ensuring the correct internal pressure in the wheel and timely monitoring of it will ensure safe management car, especially in winter, as well as optimal fuel consumption. Insufficient pressure can also cause uneven and accelerated wear of Renault Sandero tires, as well as unstable behavior on the road.