USA: Approved Engine Oils for the Latest Engines
| en. eff. | API | ACEA | visc @ 100C | bmw | MB | Porsche | ||
| MBUSA added these 229.3 oils in the fall of 2002: | ||||||||
| Mobil 1 Tri-Synthetic 0W-40 | AM | Y | SL/CF | A3/B3/B4 | 14.4 | X | 229.3 | X |
| Castrol Syntec 5W-40 | AM | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| Quaker State Full Synth. Euro 5W-40 | AM | Y | SL/CF | A3/B3 | 14.20 | X | 229.3 | X |
| Pennzoil Synthetic Euro 5W-40 | AM | Y | SL/CF | A3/B3 | 14.2 | X | 229.3 | X |
| 76 Pure Synthetic Motor Oil 0W-40 | AM | Y | SL/CF | A3/B3 | 14.5 | X | 229.3 | X |
| Kendall GT-1 Full Synthetic 5W-40 | AM | Y | SL/CF | A3/B3/B4 | 14.3 | X | 229.3 | X |
| Shell Helix Ultra 5W-30 | EU | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| Shell Helix Ultra 5W-40 | EU | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| Valvoline Synpower MXL 0W-30 | AM | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| AGIP Synthetic PC 0W-40 | AM | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| AGIP Eurosport 0W-40 | AM | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| MBUSA's earlier list from the fall of 2000: | ||||||||
| Mobil 1 Tri-Synthetic 15W-50 | AM | N | SL/CF | A3/B3/B4 | 17.4 | X | 229.1 | X |
| Mobil 1 Tri-Synthetic 0W-40 | AM | Y | SL/CF | A3/B3/B4 | 14.4 | X | 229.1 | X |
| Valvoline Synpower Full Synth. 5W-40 | AM | Y | SJ/CF | A3/B3 | ~14 | X | 229.1 | X |
| Castrol Syntec 5W-50 | AM | N | SL/CF | A3/B3 | 19.5 | X | 229.1 | X |
| Castrol Syntec 10W-40 | AM | Y | SL/CF | A3/B3 | 15.2 | X | 229.1 | X |
| Castrol TXT Softec+ 5W-30 | EU | Y | SJ/CF | A3/B3/B4 | 11.9 | X | 229.3 | X |
| Shell Helix Ultra 5W-30 | EU | Y | SL/CF | A3/B3/B4 | - | X | 229.3 | X |
| Shell Helix Plus 5W-40 | EU | Y | SJ/CF | A3/B3/B4 | - | X | 229.3 | X |
MBUSA recommends only the use of MB approved synthetic motor oil for all vehicles equipped with the Flexible Service System (FSS) as of Model Year 1998. Conventional petroleum based oils are not recommended but may be used on older vehicles.
USA: Approved Engine Oils for Vehicles Without Flexible Service System
IMPORTANT: Engine oils are labeled on the container with various ACEA (Association des Constructeurs Européens d"Automobiles) and /or API (American Petroleum Institute) designs of quality. Mercedes-Benz recommends the use of MB approved engine oils listed in the Mercedes- Benz oil specification sheet 229.1 or 229.3 which also meet ACEA and/or API classifications listed on the chart below. .Only engine oils (including synthetic) with any of the following classification grades, or combinations thereof, are approved.
| engine | MB sheet | ACEA Classification 1 | API Classification 1 |
| Gasoline | 229.1 229.3 | A2 A3 | SH SJ |
| Diesel | 229.1 229.3 | B2 B3 B4 | CF-4 CG-4 |
1 only if MB sheet 229.1 or 229.3 is not available
S-0473-00N
some oils which are not recommended:
Mobil 1 Super-Syn 0W-30 SL/SJ/CF A1/B1/A5 9.7 doesn't meet 229.1 nor ACEA A2 or A3
Mobil 1 Super-Syn 5W-30 SL/SJ/CF A1/B1/A5 9.8 doesn't meet 229.1 nor ACEA A2 or A3
Mobil 1 Super-Syn 10W-30 SL/SJ/CF A1/B1/A5 10.1 doesn't meet 229.1 nor ACEA A2 or A3
Rest of World: Approved Oils for the Latest Engines
In all countries other than the USA oils recommended for the new engines should meet MB 229.1 or 229.3 and can be mineral, semi-synthetic or full synthetic. The label "Meets MB sheet 229.1 or 229.3" can usually be found on the oil container.
From the M-Class owners" manual (worldwide edition, 2002):
A few Mercedes-Benz Approved Oils
MB sheet 227.0 approved oils
Single and multi viscosity oils for commercial diesel engines without turbocharger. Base ACEA E1.
Mobil Delvac 1300 Series
Amsoil SAE 30 Diesel
MB sheet 227.1 approved oils
multifleet
Schaeffer Moly Pure Synthetic 5W-30
MB sheet 228.0 approved oils
for turbocharged diesels with and without charge air cooling, for normal change intervals. Base ACEA E2. single viscosity.
MB sheet 228.1 approved oils
for diesels, SHPD (Super High Performance Diesel) oil, multi-viscosity, drain interval to 30,000 km
Avia Super 365 15W-40
BP Super V Turbo
Castrol RX Super Max
Castrol RX Super SP 15W-40
Elf Performance Super D - Multigrade
Mobil Delvac MX
P.O. Turbo Diesel S
Rubia XT
Shell Rimula X
Shell Rotella T 15W-40
Sunoco Forza SAE 15W-40
Aral Multi Turboral Motoröl
Pennzoil Long Life 2000 Motor Oil
MB sheet 228.2 approved oils
for diesels. Single viscosity oils for prolonged change interval, with very high performance. Base ACEA E3.
Mobil Delvac HP40
MB sheet 228.3 approved oils
for diesels, minimum spec for CDIs, multi-viscosity SHPD (Super High Performance Diesel) oil, extended drain intervals up to 45,000 km
Avia Diesel Turbo CFE 10W-40
BP Vanellus C3 Extra
Castrol Turbomax
Chevron Delo 400 Multigrade SAE 15W-40
ELF Performance Trophy DX
Kendall Super-D 3 15W-40
Kendall SHP Diesel Engine Oil
Millers XFE semi-synth
Millers XFD synth
Mobil Delvac XHP 10W-40 15W-40
P.O. Turbo Diesel Extra E
Rubia TIR XLD
Schaeffer Supreme 15W-40
Shell Rimula Super
Shell Rotella T 15W-40
Amsoil 10W-40 20W-50 Synthetic
Amsoil 15W-40 Heavy Duty Diesel and Marine
Amsoil Blend 15W-40 Diesel
Aral Extra Turboral, SAE 0W-40 Unal
Aral Plus Turboral
Aral High Tuboral
Opet Turbo Omega SHPD
Pennzoil Fleetmaster Motor Oil
MB sheet 228.5 approved oils
UHPD (Ultra High Performance Diesel) oil for turbocharged diesels; spec pioneered with Chevron. Multi viscosity oils for longest oil change intervals up to 45,000 km (light class) and up to 100,000 km (heavy class) or 160,000 km (with side filters) possible, service interval indicator, FSS. Base ACEA E4 E5.
Aral Super Turboral
Castrol Dynamax
Chevron Delo XLD Multigrade SAE 10W-40
Elf Performance Experty
Fuchs Titan Cargo 1040 10W-40
Mobil Delvac MB 5W-30
Mobil Delvac XHP Extra 10W-40
Mobil Delvac 1 SAE 5W-40
Mobil Delvac SHC 5W-40
Rubia TIR 8600
Shell Rimula Ultra
Shell Myrina TX
Hunold Multivcargo
Titan Cargo Mc
Liqui Moly LKW Langzeit Motoröl
Aral Mega Turboral, SAE 0W-40 Unal
Aral Super Turboral, SAE 5W-30
MB sheet 229.1 approved oils
for passenger cars with gas (and diesel) engines, minimum spec for latest (98+) engines
high detergent/dispersant spec suitable for normal drain intervals. Base ACEA A2, A3, B2, B3.
Aviasynth 5W-40
Avia Turbo CFE 10W-40
BP Visco 5000
Castrol GTD Magnatec 10W-40
Castrol GTX5 Magnatec 10W-40
Castrol GTX2 15W-50
Castrol GXL 10W-40 ACEA A3/B3
Castrol Formula RS 0W-40
Castrol GTX3 Professional 15W-40 (Castrol's best mineral oil)
Castrol GTD 505 01 TOPUP 5W-30
Chevron Supreme SAE 5W-40
Chevron Supreme Semi-Synthetic SAE 10W-40
Elf Excellium 0W-40
Elf Synthesis
Esso Ultra
Esso Uniflo
Fuchs Titan Supersyn SL SAE 0W-30, 0W-40, 5W-40
Fuchs Titan UNIC MC SAE 10W-40
Fuchs Titan UNIC Plus MC SAE 10W-40
Havoline Synthetic 5W-40
Havoline Formula3 X1 Extra SAE 10W-40
Havoline Formula3 X1 Diesel Extra SAE 10W-40
Hellas Super Synto 0W-40
Hellas Hermes Plus 15W-50
Mobil 1 with Super Syn 15W-50
Mobil 1 10W-30 (100% synthetic)
Mobil 1 TriSynthetic 5W-50, 15W-50, 0W-40, 5W-40 (100% synthetic)
Mobil Super M 15W-40 (mineral)
Mobil Super S 5W-40 and 10W-40 (mineral w/ synth additives)
Pentosin Pentosynth TS 10W-40
Pentosin Pentosynth 5W-40
Pentosin Pentoturbo 15W-40
Pentosin Diesel 10W-40
P.O. Zirve
P.O. Zirve Extra
Schaeffer Micron Moly 5W-30
Schaeffer Micron Moly 10W-40
Schaeffer Supreme 7000 10W-30
Shell Helix Ultra 5W-30
Shell Helix Plus SAE 5W-40
Shell Super Motor Oil SAE 10W-40
Sunoco Forza SAE 15W-40
Aral Super Elastic, SAE 0W-40 Unal
Aral Extra Turboral, SAE 0W40 Unal
Aral BasicTronic SAE 10W-40
Aral SuperTronic SAE 0W-40
Aral HighTronic SAE 5W-40
Ultra Turbo Semi-Synthetic Motor Oil SAE 0W-40
Performanx Full Synthetic Motor Oil SAE 5W-40
Valvoline SynPower
Veedol SUPER X-TRON SAE 10W-40
Veedol SUPER X SAE 15W-40
MB sheet 229.3 approved oils
for passenger cars with gas and diesel engines with extended drain interval indicator FSS up to 20,000 km, or 40,000 km - 25,000 mi, min. 1.0% fuel saving compared to 229.1, Base ACEA A3 B3.
AGIP Synthetic PC 0W-40
AGIP Eurosport 0W-40
Amsoil 10W-30 Synthetic
Amsoil Series 3000 5W-30 Heavy Duty Diesel
Aral HighTronic 5W-40
Aral Super Tronic 0W-40
Aviasynth 0W-40
Castrol Formula R Synthetic 0W-40
Castrol GTX7 DYNATEC 5W-40
Castrol Syntec(?) 5W-40
Castrol Formula SLX 0W-30
Castrol TXT SOFTEC PLUS SAE 5W-30
CIFAB Synthoil Hydrocrack HC7 5w-40
Elf Excellium LDX SAE 5W-40
Esso Ultron 0W-30 (fuel economy)
Esso Ultron 5W-40
Fuchs Silkolene Pro S 5W-40 - 100% Synthetic Oil For All Race Engines
Fuchs Silkolene Pro S 10W-50 - 100% Synthetic Oil For All Race Engines
Fuchs Titan SL SAE 0W-30
Havoline Synthetic DS 0W-30
Kendall GT-1 Full Synthetic 5W-40
LUKOIL SYNTEETIK SAE 5W-40
Mobil 1 with Super Syn 0W-40
Mobil 1 Tri-Synthetic 0W-40
Mobil v Turbo Diesel 0W-40
Mobil syst S 5W-40
Pennzoil Synthetic European Formulation 5W-40
Pentosin Pentospeed 0W-30 VS
Quaker State Full Synthetic European Formulation 5W-40
Schaeffer Micron Moly 5W-30, 10W-40
Schaeffer Supreme 7000 5W-30, 10W-30, 20W-50
76 pure syn motor oil 0W-40
Shell Helix Plus S SAE 5W-40 (Mercedes-Benz)
Shell Helix Ultra 5W-30, 0W-40, 5W-40
Sunoco Synturo Gold SAE 5W40 (introduced January 2002)
Total FINA First 5W40
Total Quartz 9000 5W-40
Valvoline SynPower MXL 0W-30
Veedol POWERTRON SAE 5W-30
Veedol SYNTRON SAE 0W-30
MB sheet 229.5 approved oils; MB Longlife Service Oils
for passenger cars with gas and diesel engines with extended drain intervals beyond 229.3 oils, to 30,000 km, min 1.8% fuel saving, service interval indicator FSS, first oils introduced summer 2002
Aral SuperTronic M SAE 5W-30
Elf Excellium 229.5 5W-30
Fuchs Titan Supersyn SL MB SAE 5W-30, MB Longlife Service Oil, first 229.5 oil
Mobil 1 0W-40
Shell Helix Ultra AB SAE 5W-30 (Mercedes-Benz)
Total Quartz 229.5 5W30
Mercedes-Benz First Fill Oils
as of 9/1/2002
1. column: engine 2. column: first fill oil viscosity
A class (168)
166 10W-40
668 10W-40
C/CLK old/SLK-Class (203/208/170)
111 10W-40
271 5W-30
112/113 5W-30
611/612 5W-30
647/648 5W-30
E/CLK new-Class (211/209)
271 5W-30
112/113 5W-30
646/647/648 5W-30
628 10W-40
S/CL/SL-Class (220/215/230)
112-113 5W-30
137 10W-40
613 5W-30
628 10W-40
648 5W-30
163 (M-Class)
112/113 5W-30
612 5W-30
628 10W-40
463 (G-Class)
112/113 5W-30
612 5W-30
628 10W-40
These exact oils are used (freigegeben):
Aral SuperTronic M
Elf Excellium 229.5 5W30
Fuchs Titan Supersyn SL MB
HiTec Synthetic Motorenöl (DC itself)
Mobil SHC Formula MB
Motorex Profile M-XL
Shell Helix Ultra AB
Shell Helix Ultra DC 229.5
Total Quartz 229.5 5W30
Many of these are especially for MB.
The qualitative composition of engine oil affects the resource, efficiency and overall operation of the engine. Therefore, when choosing a lubricant, it is worth considering not only its base (synthetic, semi-synthetic, mineral), but also the group, class, and also the viscosity of the liquid. This article describes the characteristics of the recommended engine oil for Mercedes-Benz E Class.
Mercedes-Benz E W124 S124 A124 C124 1984-1997
Model 1996 releaseGasoline motors
The manufacturer of the Mercedes Benz E Class car for engine lubrication systems 102 recommended the use of lubricants that meet the requirements of:
- motor oil class G4 according to CCMC classification or SG according to API standards;
- viscosity 10w-40 or 10w-50;
- filling capacity is 5.5 liters.
For lubrication systems of motors 103 and 104 of Mercedes Benz E Class cars, according to the operating instructions for the car, it is recommended to fill in lubricants with a viscosity of 15w-40 or 15w-50. The capacity of the lubrication system is 7.0 liters. The difference between the maximum and minimum mark on the dipstick is 1.5 liters. It is recommended to replace the car oil by the car manufacturer every 10 thousand kilometers or 2 times a year. The approximate amount of lubricant that will be needed when replacing, taking into account oil filter is 6.0 liters (including 1.0 liters of oil in the filter).
The volume of engine oil required when replacing for other types of engines, taking into account the oil filter, is:
- 5.8 l. for model 200;
- 5.9 liters if model 230;
- 6.5 liters for model 260 or 300;
- 7.5 liters if the model is 280 or 320.
Diesel power units
It is recommended to fill in Mercedes Benz E Class motor oils that correspond to the CD oil type and have a viscosity of 15w-40 or 15w-50. The frequency of changing the lubricant is 10 thousand km. The difference between the maximum and minimum mark on the dipstick is 1.5 liters. The volume of engine oil required when replacing, taking into account the oil filter, is:
- 6.5 liters if model 200;
- 8.0 liters for 250 or 300 turbocharged models;
- 7.0 liters if the model is 250 or 300 without turbocharging;
Mercedes-Benz E W210 S210 1995-2003
Model year 2001 Gasoline motors
- according to CCMC-G4, CCMC-G5;
- according to API classification - oil type SG;
- in accordance with ACEA A2-96 or ACEA A3-96.
The selection of viscosity is based on the air temperature of the region in which the machine will be operated. All-weather motor oils with a viscosity of 15w-40 or 10w-40 are used in regions with a large temperature range. For regions with too low or high temperatures, it is worth choosing special motor oils designed for summer or winter. To select a lubricant for too hot or cold regions, you should contact your Mercedes Benz E Class dealer.
Volume motor fluid required when replacing, taking into account the oil filter is:
- 5.5 liters for the E200 model;
- 8.0 l for models E 240, E 280, E 430, E 320, E 280 4MATIC, E 320 4MATIC;
- 8.5 l in the case of the E 430 4MATIC;
- 7.5 liters if the equipment is E 55 AMG.
Diesel engines
The manufacturer Mercedes-Benz E Class recommends motor oils for its cars that meet the requirements of CCMC-D4, CCMC-D5 and CCMC-PD2. In the absence of the specified motor fluids, lubricants that comply with API CE or CF-4 can be used. The selection of viscosity is carried out taking into account the temperature outside the machine according to scheme 1.
Scheme 1. The dependence of the viscosity index on the temperature of the region in which the car will be operated. Explanation of scheme 1:
- SAE 30 is poured in the temperature range from +25 0 С to + 15 0 С;
- SAE 40 is used if the temperature is above +25 0 С;
- 5w-30 is poured if the temperature is below +5 0 С;
- 5w-30 CCMC-G5 is poured at a temperature of less than +30 0 С;
- 5w-40, 5w-50 is suitable for the temperature range from +30 0 C (or more) to -30 0 C (or less);
- 10w-30 is poured in temperature conditions from +10 0 С to -20 0 С;
- 10w-30 CCMC-G5 is used under temperature conditions of +30 0 С to -20 0 С;
- 10w-40, 10w-50, 10w-60 are used if the temperature is over -20 0 С;
- 15w-40, 15w-50 are used if the temperature is above -15 0 С;
- 20w-40, 20w-50 are used if the temperature is above -5 0 C.
Short-term temperature changes are not taken into account when choosing the viscosity of the oil. Also in the manual, the manufacturer indicates that the maximum allowable lubricant consumption is 1.5 l / 1 thousand km.
The amount of lubricant required when replacing, taking into account the oil filter, is:
- 6.0 l for E 200 CDI, E 220 CDI engines
- 7.0 l for E 270 CDI engines;
- 7.5 liters for E 320 CDI engines.
Mercedes-Benz E W211 S211 2002-2009 release
Model year 2008 The manufacturer Mercedes-Benz E Class recommends the use of engine fluids that meet certain requirements. The compliance of the oil with the required standards is indicated by the tolerances that are applied to the container with the lubricant. For example, on a canister of oil there will be an inscription: "Approved according to sheet MB 229.1, 229.3 or 229.5."
Gasoline motors
Scheme 2. The dependence of the viscosity characteristics of the oil on the air temperature outside the machine. Decryption of scheme 2:
- 0w-30, 5w-30 is suitable for a temperature range from +30 0 C (or more) to -25 0 C (or less), also under similar temperature conditions it is allowed to fill in 0w-40, 5w-40 or 5w-50;
- 10w-30, 10w-40, 10w-50 or 10w-60 are used if the temperature is more than -20 0 C;
- 15w-40, 15w-50 are used when the thermometer reading is over -15 0 С;
- 20w-40, 20w-50 are used when the thermometer reading is over -5 0 C.
The amount of oil that will be needed when replacing, taking into account the change of the oil filter, is:
- 8.0 l for engines E 240, E 320;
- 7.5 l in the case of E 500;
- 8.5 l for E 55 AMG engines.
Diesel engines
Recommended motor oil for Mercedes-Benz E Class must comply with tolerances 229.3 or 229.5. Viscosity selection is carried out according to scheme 2. The volume of engine oil required when replacing, taking into account the oil filter, is equal to:
- 6.5 l for E 200 CDI and E 270 CDI engines;
- 7.5 l for E 320 CDI engines.
Mercedes-Benz E W212 S212 2009-2017 release
Model 2013 release To ensure optimal engine performance, the manufacturer recommends the use of lubricants that meet certain tolerances. You can find a list of recommended motor fluids on the official website http://bevo.mercedes-benz.com.
Gasoline motors
- 3, 229.5, 229.51 for E 200 BlueEFFICIENCY or E 250 BlueEFFICIENCY;
- 3, 229.5 for E 300, E 300 BlueEFFICIENCY, E 300 4MATIC BlueEFFICIENCY, E 350 BlueEFFICIENCY, E 350 4MATIC BlueEFFICIENCY;
- 5 if we consider the engines E 500 BlueEFFICIENCY, E 500 4MATIC BlueEFFICIENCY, E 63 AMG.
In the absence of the above motor oils, one-time topping up (not more than 1.0) of motor fluids with approvals 229.1, 229.3, or meeting ACEA A3 standards is allowed.
The selection of the viscosity characteristics of motor oil is carried out according to scheme 3.
Scheme 3. The dependence of the viscosity of the motor fluid on the ambient temperature. According to scheme 3, for a temperature range from +30 0 C (or more) to -25 0 C (or less), lubricants 0w-30, 0w-40 are used. At temperatures above -25 0 C, motor oils 5w-30, 5w-40 or 5w-50 are poured. With a thermometer reading over -20 0 C, use 10w-30, 10w-40 or 10w-50, 10w-60. If the temperature is more than -15 0 С, greases 15w-30, 15w-40, 15w-50 are poured. Motor fluids 20w-40 or 20w-50 are poured at temperatures above -5 0 C. Please note that only oils with a viscosity of SAE 0w -40 or SAE 5w -40 can be used for AMG machines.
Diesel car engines
According to the manual, for models with particulate filter E 200 CDI BlueEFFICIENCY, E 220 CDI BlueEFFICIENCY, E 250 CDI BlueEFFICIENCY, E 250 CDI 4MATIC BlueEFFICIENCY, E 300 CDI BlueEFFICIENCY, E 350 CDI BlueEFFICIENCY, E 350 CDI 4MATIC BlueEFFICIENCY, E 350 BlueTEC 229.51.
In the absence of the above oils, one-time topping up (not more than 1 liter) of engine fluids that meet the requirements of 229.1, 229.3, 229.5 or ACEA C3 is allowed. The selection of the viscosity of the motor fluid is carried out according to scheme 3, taking into account the temperature outside the machine.
Refueling tanks
The amount of oil required when replacing is equal to:
- 5.5 l for E 200 BlueEFFICIENCY, E 250 BlueEFFICIENCY;
- 6.5 l for engines E 200 CDI BlueEFFICIENCY, E 220 CDI BlueEFFICIENCY, E 250 CDI BlueEFFICIENCY, E 250 CDI 4MATIC BlueEFFICIENCY, E 300 BlueEFFICIENCY, E 300 4MATIC BlueEFFICIENCY, E 350 BlueEFFICIENCY, E 350 4MATIC BlueEFFICIENCY
- 8.0 l if power units E 300 CDI BlueEFFICIENCY, E 350 CDI BlueEFFICIENCY, E 350 CDI 4MATIC BlueEFFICIENCY, E 350 BlueTEC, E 300, E 500 BlueEFFICIENCY, E 500 4MATIC BlueEFFICIENCY.
- 8.5 l for E 63 AMG engines with external oil cooler.
Mercedes-Benz E W213 S213 from 2016 release
Model 2016 release Recommended engine oil for Mercedes-Benz E A class that ensures high engine efficiency and long-term operation must meet certain tolerances. You can get acquainted with the list of original motor oils that meet the requirements of the MB on the official website http://bevo.mercedes-benz.com.
Petrol power units
According to the operating instructions for a Mercedes Benz E Class car, lubricants with tolerances of 229.5 must be used. For AMG machines, it is permissible to fill in only lubricants with a viscosity of SAE 0W-40 or SAE 5W-40.
IN emergency situations one-time topping up (not more than 1 liter) of engine oils with the characteristics of MB-Freigabe (Mercedes-Benz approval) 229.1, 229.3 or ACEA specification A3. The choice of oil viscosity is made according to scheme 3, depending on the temperature of the region in which the machine will be operated.
Diesel car engines
Based on the manual for the Mercedes-Benz E Class car, for E 350 CDI models, oils with approvals 228.51, 229.31, 229.51 must be used. In the case of other configurations diesel cars use motor oils with tolerances 228.51, 229.31, 229.51, 229.52. In the absence of the above lubricating fluids a one-time top-up (not more than 1 liter) of oil with the characteristics of MB-Freigabe (Mercedes-Benz approval) 229.1, 229.3, 229.5 or ACEA C3 specification is allowed.
The viscosity of engine oil is selected according to scheme 3, taking into account the temperature regime outside the car.
Refueling tanks
The volume of engine oil required when replacing is equal to:
- 6.1 liters for the E 180 engine;
- 6.3 l if power units E 200, E 250;
- 8.0 l for engines E 300 BlueTEC, E 350 CDI, E 350 BlueTEC, E 350 BlueTEC 4MATIC, E 500, E 500 4MATIC;
- 8.5 liters if the car is AMG;
- 6.5 liters for other car models.
Conclusion
The manufacturer in the operating instructions for the machine indicates the parameters of the recommended engine oil for Mercedes-Benz E Class. It also describes the lubricants that can be used for topping up. Please note that after topping up, having reached the nearest service station, it is worth changing the car oil, since a long ride on mixed oil prohibited. It is also unacceptable to use various additives, their use can lead to engine failure.
Oil is the main consumable and the most important component for good work Mercedes engine. The performance of the motor and its guaranteed service life directly depend on the quality of the oil and its condition. Car manufacturers are well aware of this and therefore create their own maintenance regulations, as well as forcibly, in order to maintain a guarantee, they are obliged to change engine oil at intervals of 10 and 15 thousand kilometers.
What kind of oil to fill in a Mercedes? There are many points of view, as well as a variety of oils. But the Daimler concern decided to simplify the answer to this question and in 2011 began to produce original Mercedes engine oil under its brand. And it turned out to be an extremely effective marketing and financial decision!
Of course, Mercedes does not produce motor oil on its own, but purchases from leading manufacturers (Mobil, Shell, Fuchs, etc.), then packaging and labeling under its own brand. But for the end buyer, this simplified the selection process, because with this step, the manufacturer himself made the choice for the client, guaranteeing quality and reliability. And unlike other car companies, Mercedes now offers a complete line of consumables for a complete Maintenance.
During the time that motor oil began to be produced under the sign of a star, it has successfully established itself. At the moment, under the name of the original Mercedes engine oil, several types of oils are produced, including for forced AMG engines. Each of them has its own tolerance and its own unique characteristics.
- Old oils from tolerance sheet 229.3 and 229.31 are almost never used at the moment;
- New synthetic oils with Mercedes approval 229.5 for gasoline engines and 229.51 for diesel engines;
- The latest engine oil with a tolerance of 229.52 for diesel engines.
Mercedes engine oil change
The manufacturer's regulation states a mandatory replacement of engine oil as part of the planned ones. Maintenance intervals depend on many factors - the manner of operation, the statute of limitations of the previous maintenance, the kilometers traveled since the last maintenance.
Engine oil Mercedes MB 229.51 5W-30
synthetic, 5w-30, petrol/diesel
Description
Engine oil is recommended for use in diesel engines with particulate filters, as well as modern gasoline engines. For motor oils approved for this approval, an extended service interval is provided compared to MV 229.31, up to 20 thousand km. The basic requirements are in accordance with ACEA A3 B4 and C3. The MB 229.51 approval was introduced in 2005.
What is the difference between 5w30 oil and 5w40 oil
Motorists know that choosing the right engine oil for an engine is an extremely important task. It is good when the manufacturer recommends a specific brand and type of oil. However, older car owners do not have this advantage. It is necessary to determine the right engine oil as accurately as possible so that the engine does not give surprises at the most inopportune moment. But there are so many markings on oil cans. For example, 5w30 oil and 5w40 oil. What is the difference?
Definition of oil 5w30 and 5w40
5w30 oil is an engine oil that is used to lubricate car engines. The oil designation contains two numbers that reflect the most important property of engine oil - viscosity at low and high temperatures. To start the engine at low temperatures, you need to choose an engine oil that should not be very viscous. And in summer, at high temperatures, the oil, on the contrary, must keep the lubricating film between the parts. The first number in the "5w30" designation is the winter use class (the letter "W", that is, "Winter", confirms this), the second number is the summer use indicator. Thus, the oil is multigrade.
5w40 oil is a multigrade motor oil with a winter application class of 5w and a high temperature index of 40. These designations are accepted in the SAE specification (Society of Automotive Engineers) and are an international standard for determining the viscosity of motor oils. Note that the viscosity-temperature characteristics of motor oils are paramount in determining quality.
Comparison of 5w30 and 5w40 oils
It is known that motor oil consists of basic base oils and various thickening additives. It is these additives that give the desired effect in winter or summer. However, today, probably, to facilitate the work of a motorist, multigrade oils are more often used. The viscosity grade of engine oil depends on the quantity and quality of thickeners. In addition, this versatile oil changes its viscosity under the influence of shear rate. How less speed, the higher the viscosity.
The motor oils we are comparing today have different amounts of thickeners. As a consequence, the second number, the viscosity characteristic at high temperatures, is different. That is, 30 or 40 is an indicator of how long engine oil is able to keep a protective film when summer temperatures rise. This is a very important property for keeping the motor from premature wear and preventing the engine from stopping in the heat while in a traffic jam.
Taken from various internet sources :)
P.S. So, dear guest, my opinion is pour what you poured and provided by the manufacturer of your Murzik. (100% agree with Willy)
If your engine does not "eat" oil.
In the event that he began to "eat butter"
there are 2 options.
1. Overhaul of the engine (expensive), or a new engine (even more expensive).
2. Use oil additives. (I checked it myself on an old Mazda Demio 1.5 with a run of 230 because)
I used the additive "Visco-Stabil Viscosity Stabilizer" from the company "Liquimoly".
The result of changing the additive is 0.5 liters of oil savings by 5 since (this is with an oil filling volume of 3.2 liters in the engine).
The engine is the heart of the car. It is no coincidence that they call it that. As with any mechanism, careful attention and care is required so that it lasts for many years without breakdowns. And the main component, regardless of whether it is a budget or premium car, which allows the engine to work without failures, is engine oil.
Working parts are in contact, which leads to their abrasion. To avoid this, use engine oil. But these are not all the functions that allow you to keep the motor in working condition and affect the duration of work.
Cooling is carried out, especially for the lower part, under the piston, where a high temperature is created.
What characteristics should Mercedes engine oil have? Let's consider the points:
First. Excellent lubrication between moving parts.
Second. Heat dissipation and thermal stability. It is necessary to prevent overheating of the internal combustion engine.
The third. Special characteristics to keep the internal combustion engine clean.
Fourth. Maintaining a seal between cylinder and piston to prevent loss of pressure and prevent exhaust gases from leaking into the oil pan.
Fifth. Properties that allow the engine to work under load.
It is no coincidence that a Mercedes oil change is the most important stage in car maintenance. Wear particles, combustion products are always in motion during engine operation. There is a replacement - they are removed.
Recommended replacement intervals vary between car brands, but the more often you change, the longer your engine will last. Recommended every 10-15 thousand. km, but this is a long time, it is better to cut it in half and change it every 5-7 thousand km.
In 2011, Mercedes decided to choose Mercedes engine oil for their cars. Production under the Mercedes brand has begun, which has become the right marketing move and the choice of many owners german mark.
World motor oil companies: castrol, shell, Lukoil and others offer their products, which are subsequently labeled with the Mercedes brand. Mercedes engine oil is offered in several types for certain types of engines with their own approval.
Tolerances 229.5 and 229.51.
Often on containers you can see the numbers 229.5 and 229.51. What do they mean? This is the main indicator of original Mercedes oils - tolerance. It shows that it is allowed to use this type of oil in German brand engines. The marking means that it was created using modern technologies and is only suitable for Mercedes engines.
Getting permission is a complex process. And in order to indicate the necessary tolerance on the canister label, you should obtain a certificate. First, they do tests. Secondly, the composition is analyzed in special laboratories, and only after all the procedures have been completed and a certificate has been obtained, the required tolerance can be indicated.
First number: for petrol and diesel engines. Second, for diesel engines with a particulate filter. There is also the latest approval 229.52, created for diesels.
There are also old tolerances: 229.1 and 229.3. And if the first admission has long been outdated. Use in modern engines is unacceptable, then 229.3 has the characteristics that allow the use of oil in many Mercedes engines.
It is necessary to remember, use the years of release. Mercedes oil with a tolerance of 229.1 for engines manufactured before 2002, and 229.3 after 2002.
But there is also a reason why the choice between 229.3 and 229.5 will take the side of the latter - the price. The first is not much cheaper, but differs in its characteristics from modern counterparts. It is worth paying a little extra and using one suitable for a certain type of engine, regardless of viscosity: 5w30 or 5w40.
Choice between 229.5 and 229.51?
Such a question may arise for drivers, because oil with a tolerance of 229.5 has detergent properties, and with 229.51 - a sulfur content that promotes the formation of solid particles.
Therefore, everyone makes a decision for himself. A smart choice would be to find out what Mercedes offers for a particular engine. If both tolerances are listed, then use 229.5, regardless, gasoline or diesel engine installed in the car.
The right decision is to contact official dealer who will make recommendations. In this case, you can be sure that they will recommend original products.
How not to buy a fake?
It makes no sense to talk about how a fake can harm a car engine, because it becomes clear that the engine can be damaged. And these are expensive repairs up to the replacement of the engine.
First and important rule, as mentioned above, buy from an authorized dealer. 100% guarantee that the oil will not be fake.
Second, the container label indicates the standards, classes and tolerances. ACEA A3/B4 standard and approval 229.5 required. It will not be superfluous to find out the manufacturer's code, for example, the number a001989530312.
Analogues .
Tolerance - 229.5. Conforms to the European standard ACEA A3/B4.
Total Quartz 9000 Energy 0W30 is a synthetic that Mercedes recommends for use in its cars. Effectively protects against wear of parts.
Benefits of Total Quartz 9000:
It is easier to start a car in winter.
Minimum burnout.
Does not allow deposits, regardless of driving style.
The same, but with a higher viscosity of 0W40 and additional additives, it retains fluidity. That allows you to quickly start the engine at low temperature conditions.
The specially developed Mercedes-Benz PKW-Synthetic Motorenol MB 229.5 is ideal for German vehicles.
Advantages of Mercedes engine oil (I)
It is no coincidence that Mercedes creates oil under its own brand. To be more precise, global manufacturers produce oils that meet the technical requirements of Mercedes-Benz.
The tests carried out have shown that the oil developed for Mercedes engines, in comparison with others, has a high lubricity and allows the engine to work better. The wear of the engine is reduced and the consumption of gasoline is reduced, which will be a big plus for long-term operation of the car.
Butter motorized Mercedes, created on the basis of a complex synthesis of oil. This contributes to the creation of an ideal viscosity, regardless of the temperature range. That allows the engine to work at any time of the year in all, even harsh climate conditions.
Special additives are added to the base to help protect against wear of the rubbing parts of the engine and protect the insides from corrosion. Allowing other people's additives is practically a manufacturer's crime. Also, how to change the composition to reduce the price.
The main indicator of quality is the correct ratio of additives, the effect of which contributes to the correct operation of the motor and the preservation of all its parts in excellent condition. And the cost of such a product is quite affordable.
Mercedes-Benz is constantly improving its scientific developments, including in the field of lubricants. It is not surprising that finding out the recipe for making such oil is a secret behind seven locks. Refers to secret developments. This is the difference between original and non-original oil. What class and how many liters are in the canister are already secondary indicators.
Benefits of Mercedes(II) engine oil
Every owner of a Mercedes car understands that it is better to use original products, especially for this brand. Non-original ones do not have special additives that they use in production, which does not guarantee reliable engine operation. The motor resource will be reduced, unstable operation is possible. Repair of Mercedes engines is not a cheap pleasure.
To be sure of the work, you should listen to the banal, but important advice - use only original Mercedes engine oil. Above it becomes clear the difference from other types of motor oils.
Summing up, it should be remembered that in addition to the maintenance of a Mercedes car, changing the engine oil is the main process that contributes to the long-term operation of the engine. BUT correct selection oil, allows you not to be afraid that technical problems will occur with the engine. The owner has two ways: change it yourself or contact an authorized dealer who, if necessary, will select the appropriate type of Mercedes diesel or gasoline oil. Synthetics or semi-synthetics. There is a third option, for the first time to come to the dealer to find out which one is better to use, and then buy and replace it yourself the next time.
The use of original products will guarantee that the engine will not experience technical problems associated with the lubrication of moving parts. The manufacturer has taken care original oil allowed the engine to run. Like a clock and not cause trouble to the owner of the car. Added special additives create the "ideal" Mercedes oil. And it is not by chance that the emblem of the Mercedes-Benz brand, the global manufacturer of premium cars, flaunts on it. The owner understands that reliability and quality are the two main characteristics of this brand, and he will not allow it. So that the most important product in the face of engine oil could harm the engine. Real reviews owners of the Mercedes brand on the Internet only confirm this.
YouTube video: