Any washing machines become unusable after a certain period of time, and most often they are simply sent to a landfill. But some details from it can be given a second life. For example, an engine from an old washing machine, out of order, can become the basis for a new homemade device or tool. There are many different ways to use it for the benefit of the household. True, it all depends on the imagination and skill of the home master.
Types of engines
The type of electric motor chosen for homemade depends on the age and model of the washing machine. For example, if it was an old washing machine from Soviet times, then it most likely had a reliable asynchronous electric motor installed on it. Such a motor from a washing machine has a power of 180 W, has excellent torque indicators and is the most convenient motor for homemade products. Also in the hands of the master may be a two-speed electric motor, a collector motor or an engine from a modern SM of any model and class.
asynchronous motor
Asynchronous electric motors used for washing units can be with two or three phases. But since about 2000, the production of motors with two phases has practically ceased, and they have been replaced by more modern three-phase ones, with frequency control of the rotation speed.
Such a device consists of a stator, which is a fixed element of the electric motor and a rotor that drives the drum of the device.
The advantage of this device is:
- In a simple design.
- Ease of maintenance.
- In low noise level.
- At a low cost.
The disadvantages include big sizes, low efficiency, the complexity of the electrical circuit and its control. Such electric motors can still sometimes be found in old, inexpensive models of washing machines. They are not used in powerful modern devices.
Collector motor
Such electric drives have been used since the 90s and are considered almost universal due to the ability to connect them not only to AC, but also to DC voltage,
The electric motor has an aluminum housing in which a collector rotor, a stator and a block with contact brushes are built.
Advantages of a collector motor:
- Small sizes.
- Smooth speed control by increasing or decreasing voltage.
- Ability to work with different types voltage.
- There is no binding to the frequency of the electrical network.
The disadvantage is expressed in the frequent change of contact brushes and a short service life.
inverter drive
This is a direct drive motor, which is also called an inverter motor. It does not have a collector rotor. Developed by the Korean company LG and refers to the latest technology. The mass production of inverter drive motors began in mid-2005. With a reliable, durable and simple design, they firmly hold the leading position in the electric drive market.
The advantages of an inverter drive include:
- Compactness.
- Low machine vibration.
- High efficiency
- Lack of contact brushes and belt drive.
- Virtually silent operation.
The disadvantage of inverter motors in the form of a complex electronic circuit governance is more likely to concern producers than consumers,
Connection and launch
When dismantling the electric motor from the washing unit, it is recommended to make special marks on all its wires. These actions will later help to connect the motor directly to the electrical network (this is especially true for asynchronous electric motors from old washing machines, where starting capacitors are required). Other types of motors also have their own characteristics.
Therefore, for the correct connection of each type of electric motor, it is best to search for information on the Internet or use special reference literature for this. And if during dismantling all the contacts were marked, then starting the motor from the washing device will not be difficult. To do this, you will simply need to follow the instructions for connecting a certain type of engine to the network and follow the safety rules.
The second life of the electric motor
From an old, broken washing machine, it is possible to make many homemade products for household needs. Many of its elements are suitable for this, including the body, drum, covers, etc. But most often, units are made for use in household purposes, home workshops or garages, using a motor.
You can use the electric motor from the washing unit, for example, by making a home-made juicer for the kitchen, a vibrating table for the workshop, as well as making many other useful devices and devices that can greatly simplify some types of work for the home master.
Grinder
For the manufacture of a grinding machine, a high-power motor is not required, and in terms of the number of revolutions, any electric motor from an old washing machine can be suitable.
To build a machine, you need to prepare a base plate for it from cutting a thick wooden board and fix an electric motor and a switch on it, taken from the same washing machine. For fastening, you can use metal brackets.
Next, cut the thread and fix the adapter-nozzle on the shaft for attaching the grinding wheel. In the kit for the nozzle, you can prepare an adapter with a neck for a cutting abrasive wheel. Then you get a cutting machine that can cut plastic pipes, as well as fittings, a metal sheet or a corner.
The result can be a compact, portable and almost universal grinding and cutting machine, the manufacture of which does not require the use of electric welding.
Forage cutter and grain crusher
Another homemade product to help those who are engaged in agriculture can be made from an electric motor removed from washing equipment. It is a grain crusher and feed cutter in one piece.
Converting a laundry machine into a food cutter does not require much effort. To do this, you need only the body of the machine with the top load of linen and the electric motor itself. The case can be purchased for a penny at points where scrap metal is accepted or searched at a landfill.
The manufacturing technology of the feed cutting unit itself will be as follows:
A device made on its own will cost much less and will work almost as well as a factory-made one.
Making a mortar mixer
For those who are going to build or make repairs in the future, the motor from the washer can be useful for the manufacture of a full-fledged mortar mixer, which can facilitate the construction process and at the same time save significant funds. This will be especially beneficial for residents of rural areas, where the construction process practically does not end.
The manufacturing process of the mortar mixer looks something like this:
This design is convenient because it works like a swing, and the prepared solution can be easily poured out of the mixer by simply tilting the tank.
To mix the solution, it is best to use a washing tank from a top-loading machine. Its capacity is just enough to mix several buckets of mortar.
The activator is removed from the tank and the water drain hole is tightly closed. Instead of an activator, a shaft is installed on which a steel strip with sheet metal blades is attached inside the tank.
The tank is laid and fixed to a movable frame welded to the mixer base pipe. Outside, an electric motor connected to the shaft is fixed to its bottom. To do this, two holes are drilled in the bottom of the tank according to the size of those on the motor housing, after which the tank is rigidly bolted to the barrel.
After that, it remains only to connect the electric motor and test the operation of the mortar mixer.
How to make a lawn mower
A homemade lawn mower is one of the options for using an electric motor from a decommissioned washing unit. This tool is useful to owners who own a personal plot or a summer cottage. At the same time, homemade does not need to purchase any additional spare parts, which can always be found in a barn or in a landfill.
A homemade lawn mower with a motor from a washing machine can be made in this way:
This completes the manufacture of a homemade lawn mower, and it is ready to go.
The scope of use of electric motors from washing machines is very wide. A lot of homemade material can be freely found on the Internet - on thematic sites or forums.
An obsolete or out of order household washing machine contains a lot of structural elements that, having been in the hands of craftsmen, can be useful in household. Such nodes include various switches and relays, pulleys, a stainless steel drum, etc. However, most often there are homemade products using an engine from a washing machine.
Types of engines from washing machines
Depending on the design variant, washing machines are equipped with various types motors. Among them are asynchronous, collector and inverter motors.
Asynchronous motors
Structurally, asynchronous electric motors consist of two main parts - a fixed stator and a rotor, the rotation speed of which can exceed 2500 rpm. This motor is easy to maintain, has a low noise level and low cost. However, due to significant shortcomings (large dimensions, low coefficient useful action(efficiency), the complexity of the electrical control circuit, etc.) they are in washing machines are not currently used. They can only be found in old models such as SM-1.5 "TsNA" (Tambov plant "Revtrud"), "Donbass", "OKA" (Nizhny Novgorod plant named after Y. Sverdlov), "Riga", etc., manufactured before 2000.
Collector electric motors
Collector electric motors are motors that are currently installed on about 80% of washing machines (Vyatka-automatic, semi-automatic models of the Evrika series, etc.). Structurally, they are somewhat more complicated than asynchronous motors, since, in addition to the stator and collector rotor, they require a tachogenerator and conductive brushes. Collector motors have:
- small overall dimensions;
- significant starting torque;
- simple control scheme;
- high rotor speed, etc.
Important! At the same time, the collector electric motor requires regular Maintenance associated with the wear of the collector-brush assembly, and is characterized by a high level of noise.
inverter motors
Structurally, inverter (brushless) electric motors, as well as asynchronous motors, consist of a stator and a rotor. However, thanks to the use of direct drive technology and a three-phase inverter type control circuit (speed is controlled by a frequency converter), the developers managed to eliminate a number of connecting elements, which improved them. performance characteristics. They differ from other types of engines:
- high efficiency;
- high power;
- long service life;
- low noise level, etc.
Among the shortcomings, experts note a more complex control scheme, which somewhat increases the cost of automatic washing machines (Indesit, LG, Ardo and their analogues).
Dismantling and connection of electric motors
When removing a used electric motor from the body of the washing machine, some nuances must be taken into account.
- removed along with the capacitor. In this case, the capacitor must be discharged, otherwise you can get an electric shock.
- On the stator of a low-voltage collector electric motor permanent magnets are installed, alternately connected to a current source. On the case of such an engine there should be an information plate indicating the magnitude and polarity of the connected voltage.
- inverter motors dismantled together with the block electronic control . On the case of the latter there is also a plate (sticker), which indicates the magnitude of the supply voltage and its polarity.
Before starting the engine from the washing machine, you need to understand the purpose of its wires and connect them correctly. Different manufacturers have different colors, so you must first “ring out” them with a tester.
In homemade products are most often used collector electric motors from washing machines. They usually have 6 wires. Wherein conclusions from the tachogenerator are practically not used. Their resistance during dialing is about 60-70 ohms. Having identified these wires, they are taken aside and fastened with electrical tape (so as not to interfere).
The remaining conductors go to the stator and rotor (2 wires) and to the conductive brushes (2 wires). On wiring diagrams, they are indicated by colored or numbered arrows. For example, "arrows 1" mark the wires leading to the brushes, and "arrows 2" mark the wires leading to the stator windings. Easiest determine the conclusions coming from the brushes. They are called from the side of the contacts, after removing the graphite rods. The resistance of the stator winding wires is in the range of 12-35 ohms.
There are also motors with 3, 4 or 5 wires. In this case, a three-wire circuit is used in single-phase motors, where the starting winding (with less resistance) connected through a capacitor. In addition, one of the wires can be ground. Conclusions that do not ring out can go to various sensors (for example, a temperature sensor, etc.). The connection scheme of the electric motor is also important - a star or a triangle.
Having determined the pairs of wires coming from the rotor and stator, they are connected one by one from the stator winding and from the rotor brush. The remaining two wires are connected to the mains. and test the performance of the motor.
Advice! For safety reasons, before connecting to the 220 volt power supply, the motor must be securely fixed to a fixed base. This will avoid its involuntary movement when power is applied.
Homemade from the engine from the washing machine
The electric motor from the washing machine can be adapted as the main power unit in a variety of designs. Getting started, you must first determine the parts that will be mounted on the shaft of this motor, and ensure their secure fastening. To do this, it is necessary to equip the motor shaft with a suitable nozzle.
Refinement of the electric motor
The main problem that has to be solved when finalizing the electric motor is the discrepancy between the mounting holes of the parts that will be mounted on the shaft and the diameter of the latter. To pair these parts, it is necessary to make a special adapter (flange). On the one hand, it must have a thread for installing the part, and on the other, an element that allows you to securely fix the flange on the motor shaft.
Most often, for the manufacture of such a flange, a piece of steel pipe with a length of no more than 20 mm and a diameter of 32 mm is used. At one end of this pipe, a thread is cut, the length of which must be at least twice the thickness of the installed nozzle.
Important! The thread must be cut in the opposite direction to the rotation of the motor shaft. Otherwise, the installed part will fly off, which is unsafe for the user.
The opposite end of the pipe is heated with a blowtorch and pressed onto the motor shaft. After cooling, the flange will be securely fixed. For hardening, it is advisable to drill a hole across the connection and additionally tighten the shaft and flange with a bolt and nut. Such refinement will allow you to securely mount any nozzle on the motor shaft(pulley for belt transmission to the compressor, grinding or cutting wheels, cutting blades, etc.). You can use the electric motor modified in this way when creating various homemade products.
To sharpen scissors, knives, drills and other cutting tools, the motor must be mounted on a workbench or other suitable surface. To do this, it is best to make an intermediate frame (stand), on which, using standard mounting holes, install the engine. The design of the frame must ensure reliable fastening of the assembly in the workplace.
Next operation - grindstone installation. To do this, it is necessary to prepare three nuts with appropriate threads and two suitable washers. One nut is screwed onto the flange until it stops, then a washer is put on, then an emery wheel and another washer. This whole “sandwich” is pulled together with a second nut. The third nut is used to lock the threaded connection. On this, the creation of emery can be considered complete.
Advice! Such a device can be assembled using even a small electric motor from "Baby" type washing machines.
Other simple devices are made in a similar way, for example, a circular saw, a grinder (grinder), etc. But if the emery can be started simply by twisting it with force by hand (with care), then when using more complex mechanisms made using an electric motor from old washing machine, you must have starting device. How to make such homemade products with your own hands will be discussed below.
Having securely fixed the frame with the electric motor on the workbench, you can make a multifunctional lathe designed for processing wooden blanks. It consists of:
- headstock mounted directly on the motor shaft;
- tailstock, designed for reliable fastening of the workpiece;
- a handpiece that provides convenient use of the tool (chisel, chisel, etc.).
The construction of a stationary sawmill begins with the manufacture of a special bed with a technological slot for a saw blade. An electric motor from a washing machine is then installed on it, having previously fixed a small pulley on it for drive belt. A large disc is mounted on the saw blade shaft. The pulleys are connected to each other by a wedge-shaped or ribbed belt.
To make a feed cutter, in addition to the engine from the washing machine, you will also need its drum, in the back wall of which you need to make a hole for the electric motor shaft. Then, having installed the motor on the drum, the cutting elements (2 knives) are fixed on the shaft. From above, the drum must be closed with a lid, otherwise the cut raw materials will fly out of it.
Conclusion
When purchasing a new washing machine, you should not throw away the unit that has served its time in a landfill. Its components, and especially the engine, can be used to make handicrafts useful in the household, saving a certain amount of material resources on this.
The most reliable washing machines
Washing machine Electrolux PerfectCare 600 EW6S4R06W on Yandex Market
Washing machine Samsung WW65K42E08W on Yandex Market
Washing machine LG F-2J5HS4W on Yandex Market
Washing machine Gorenje WP 7Y2/RV on Yandex Market
Washing machine BEKO WRS 55P2 BSW on Yandex Market
In some situations, it is cheaper to purchase a new product than to restore failed household appliances. However, a prudent person will receive additional benefits by using functional components for their intended purpose. This publication presents homemade products from the engine from a washing machine .. And video clips will help to more accurately reproduce homemade craftsmen and get useful products quickly and at no extra cost.
Read in the article:
What is the engine from an old washing machine suitable for?
First you need to clarify the real capabilities of the existing power unit. In household appliances Soviet period installed fairly reliable asynchronous motors (180-220 W). They were connected to two-phase AC networks. Previously, structures were created in a collapsible version. Therefore, in the event of a breakdown, repair does not cause excessive difficulties. The only exception is winding damage. Modern models are characterized by increased power (up to 340 W).
Since the late 90s of the last century, such simple engines have not been used. Instead of asynchronous, collector units are more often used. They are smaller and weigh less. In the corresponding modifications, the following possibilities are provided:
- DC power connections;
- smooth speed control.
To supply current to the rotor part, graphite rods with spring pushers are used. These parts must be replaced periodically. The power of collector-type electric motors ranges from 340 to 780 W at a speed of rotation of the working shaft in the range of 11400–15200 rpm.
The photo shows the power unit, which was first used by the engineers of the famous South Korean brand LG. It is often called an inverter, since it is assumed that the speed can be smoothly adjusted (up to 2 thousand per minute) using an external control device. The power of such units exceeds 500 W, which allows you to connect it directly to the drum shaft without a special belt drive. The following parameters and features of the motor from the washing machine determine where this power unit can be used:
- power;
- speed of rotation of the working shaft;
- dimensions;
- power supply and control circuit.
For your information! More attentive people pay attention to maintainability, reliability, resistance to external influences. They study the opinion of experts in specialized forums, official guarantees manufacturers.
What can be done from an old washing machine: examples of work with comments
The information below will help you implement different projects based on the respective power unit. Here are the current homemade products from the motor from the washing machine, which performed well during practical tests. Attached to some projects step by step instructions with detailed explanations of the assembly process.
How to make a grinder or sharpener from a washing machine engine
| Illustration | Action Description |
 | First of all, we will determine which interchangeable nozzles will be used in practice. The features of processing processes are of significant importance: the duration of cycles, the hardness of the material of the workpieces, etc. |
 | In this version, the author uses grinding discs with a diameter of 200 mm with an adhesive layer on the non-working side. He picked up a nozzle of approximately the same size from a “grinder” (175 mm) with a threaded connection in the central part. |
 | To implement the plans, an old washing machine engine was found, which rotates the anchor at a speed of up to 1500 rpm. In the photo, the arrow indicates the starting relay, mounted on the case. Food - from the alternating current network 220 V. |
 | On the lathe created a special nozzle. It is attached to the 14mm shaft with a screw. A threaded rod is welded to the end of the part, which corresponds to the connecting node of the adapter. |
 | During practical tests, it became clear that the initial rotation does not correspond to the direction of the thread. This means that when performing work operations, the nozzle will unscrew. The author did not use special wiring diagram, and swapped the housing covers along with the bearing. |
 | For reliable fastening of the power unit, a special bed was created from steel corners. Welded joints cleaned. At the final stage, the product is covered sequentially with a primer for metal and paint. |
 | Using screws, a table (1) equipped with a rotating frame is connected to the frame. A support rod (2) with height adjustment is installed in the center. With its help, the exact angle necessary for working with workpieces is set. |
 | The assembly confirmed the accuracy of the calculation and individual parts. To eliminate errors, it is necessary to prepare a set of drawings in advance. It is not necessary to comply with engineering GOSTs. However, it is necessary to carefully understand the features of each component of the structure, note the dimensions and landing dimensions. |
 | A practical test shows the good functionality of the new machine. Power is quite enough for processing duralumin blanks. An additional plus is the quiet operation of the washing machine engine. |
 | For the collection and disposal of waste, a special box was made with an outlet pipe for connecting a vacuum cleaner. It is installed at the bottom of the bed under the working area. |
For your information! According to this algorithm, it is easy to create a high-quality grinding machine from a washing machine. To increase safety, it is necessary to use personal protective equipment during processing. A transparent polymer shield covering the work area is also useful.
Wood lathe
It is not too difficult to create a sharpener with your own hands from a washing machine. However, the following example demonstrates the relative ease of manufacturing more complex equipment.
Since applied asynchronous motor from the Vyatka washing machine, a capacitor is installed in the power circuit. The armature of this power unit rotates at a speed of 400/3000 revolutions per minute. To set the axle parallel to the frame parts, washers of the appropriate thickness are selected.
lawn mower
The picture highlights important details:
- These rods (1) must have sufficient strength, since the movement of the equipment around the site is carried out manually.
- The engine switch from the washing machine is installed near the handle for the convenience of the user. For connection use a wire (2) with high-quality insulation. They provide good tightness of electrical components so as not to create emergency situations in conditions of high humidity.
- Belt drive (3) reduces vibration. By changing the size of the pulleys, they select the optimal speed of rotation of the knives.
- Such nodes (4) are used to adjust the clearance, the height of the lawn mowing.
- Large wheels (5) are useful for overcoming obstacles on the land.
feed cutter
How to turn the engine from an old washing machine into a generator
However, to obtain such a result, special preparation is required. A recess is made at the end of the rotor. It contains permanent magnets. The upgraded part is installed in place. To accumulate the received energy, a rectifier and a battery are used. These units are connected via a controller to optimize the charging process.
Concrete mixer
Here, two belt drives are supplemented by a gearbox. In the complex, it was possible to create the necessary torque with a relatively low power of the electric drive.
A circular saw
What can be made from a washing machine drum: simple designs
In practice, not only the engine from the washing machine is useful. What can be done from the drum is described in the following sections of the publication.
Brazier from a drum from a washing machine: photos and useful tips
The stainless steel grill looks great. It retains its functional characteristics for a long time and is flawless. appearance. It is easy to clean from contamination. There is no sharp corners and other potentially hazardous parts. Good resistance to high temperatures. Light weight means no difficulty in moving. The most suitable blank is a drum from a top-loading washing machine. It has special doors that close the firebox, regulate the air flow.
Can a smokehouse come out of a washing machine drum
For processing, meat, fish and other foodstuffs are placed for a long time in a closed container, where a high concentration of smoke is maintained. Apply low- and high-temperature technology. In any case, a good tightness will come in handy.
Weld all excess holes. Install a smoke outlet. Inside, lattice shelves and suspensions are mounted to place products.
Decorative and functional crafts from the washing machine drum
These pictures show examples of products that can be created quickly and efficiently without detailed instructions:
How to create a do-it-yourself removable machine from a washing machine: using a few pieces of old equipment
The photo shows what can be done from an activator-type washing machine. After a significant alteration, a convenient device will be obtained that will help automate the tedious process of processing poultry before selling (long-term storage). Such equipment is used to solve domestic and commercial problems.
A similar design is created from a washing machine. Rubber pins (beats) are inserted into the walls of the tank and the disk installed from below. When the bottom part rotates, these elastic elements tear off the feathers from the carcass. To increase the efficiency of the process and remove debris, watering is used from the top side of the tank.
Homemade products from the engine from the washing machine: conclusions and additional information
In any case, even when working with a relatively simple design, design documentation should be prepared. This will simplify the search for additional components, prevent assembly errors. Use the comments to post your own ideas and get answers to additional questions. With the help of our online magazine, it is easy to draw the right conclusion about what to do with the old washing machine after the end of the intended use of the technique.
The video demonstrates the principle of operation and features of the picking machine:
In the modern rhythm of life, time passes very quickly and now a once high-quality and reliable washing machine turns into garbage due to wear and tear or for other reasons. What to do with your favorite assistant? Many will decide with a heavy heart to throw away the device. But owners with imagination and straight hands can start looking for options for using various working parts. This text is intended to help find the application of the engine from the washing machine. So, what can be done from an old washing machine, or rather, from its engine?
It is necessary to start first of all with the basis of the future machine. This platform can serve as a slab of old chipboard from old Soviet furniture, distinguished by its strength and reliability. The power part of the unit is the engine from washing machine
. On its body there are standard studs, to which you need to attach mounting corners, which you will need to purchase in advance at any building supermarket or store. Accordingly, we attach the corners to the stand or directly to the base, if this, of course, is convenient.
Do not forget that simply connecting the engine from under the washing machine to 220 W will not lead to anything good. It is necessary to save the native capacitor and connect the motor through it.
Since the motor shaft from an automatic washing machine is not designed to attach various cutting or grinding discs to it, you will need to look for an adapter for a sharpener or an adapter for emery on local electronic boards and purchase it to make the device to last.
The purchased adapter sits on a 14 mm shaft. Visually, you can’t confuse it with anything - a cylindrical element that is fixed with a threaded bolt. The cylinder shaft itself has an M 14 thread. A double-sided washer with flow diameters is put on it, allowing you to install all consumables for a grinding and grinding machine based on an old engine from a washing machine.
Based on foundation it makes sense to make and install a removable table from the same fiberboards. To securely fix the table, on the base you will need to use two dowels on both sides of the surface. In this addition to the machine, it is necessary to make gaps for a variety of discs. It is important.
Thus, it turns out an inexpensive, but functional grinder or grinder. It will last a long time and reliably, which is very nice, especially in the context of the fact that it turned out to be made from an old motor from a washing machine. By the way, some have taken this principle as a basis in the manufacture of a router, although for most this idea still seems crazy.
lawn mower
In order to bring this idea to life and make a high-quality device, you need to use:
- steel base;
- wheels and handle;
- the wire;
- knife to be made by yourself.
Traditionally, you should start with a base of sheet steel 500-500-5 millimeters. Having prepared the wheels from under something, for example, from an old stroller, we fasten them to a steel sheet. The engine itself from the old washing machine is attached directly to the finished base using standard studs on the motor housing. On the shaft of the unit itself, with the help of an adapter previously machined on a lathe, a cutting knife is fixed. Then, having prepared the handle from the available material, we attach it to the steel base. On the same handle we bring out the power supply wire of the motor.
The advantages of this lawn mower are the simplicity of design, as well as its functionality. And the best part is that the analogue of the factory mower is an order of magnitude more expensive.
Wood lathe
For the basis of the product, a beam of 250-50 millimeters is needed on which the engine from the washing machine is attached. How? The answer is simple - with the help of mounting angles. We fasten the studs with bolts to the corners, and we, in turn, fasten them with self-tapping screws to the base. We put an adapter for a sharpener on the motor shaft. After that, we screw a removable nozzle onto the thread of the adapter, welded from a bolt with the corresponding thread and a small cylinder with spikes. Thus, this part of the machine is a fixed headstock.
The role of the movable headstock is a welded structure, consisting of:
- pipes with internal thread;
- shaft from a vise, at the end of which there is a small cylinder with a thrust bearing and spikes.
T the ruba is welded onto a pedestal from a square of 45-45-3 millimeters. The basis for the movable headstock is made of sheet steel, on which the pedestal is also welded. Then the base of the headstock is screwed to the beam, which acts as the base of the machine.
The next structural part of the lathe from the engine from the old machine is the “emphasis”. It is made of a corner with a sawn groove acting as a guide, and a second corner that reliably walks along the grooves in the guides thanks to the bolts between these two elements. The same bolts fix the corner on the guides. The stop is fastened with self-tapping screws directly to the beam.
Circular
First you need to build a frame from a square pipe in the form of a small rectangular table. In the center of it, it is necessary to weld the ears under the shaft with fastening under. A tabletop or a cut-out sheet steel plate should be screwed onto the upper part of the bed. Under the upper parts of the bed, you will need to weld the base for the engine from the old washing machine with installation later.
In the form of a running gear, a belt drive is presented. On the shaft of the motor and the circular, both pulleys have grooves, and the belt has grooves. This allows the belt not to fly off the pulleys during operation. For ease of use and transportation of this circular, two wheels from an old trolley are attached to the legs of the bed on one side, and on the other hand, a convenient handle of the required length. Operating tips include safety rules when working with a circular saw, as well as the fact that you should always check the belt tension. This will keep the fingers and the rest of the body intact.
wood splitter
To get started, prepare:
- threaded cone pre-machined on a lathe;
- a shaft at one end of which a thread is cut;
- two bearings in the housing;
- bushing for bearings;
- pulley;
- bushing for pulley;
- nuts and washers with bolts.
In the form of a motor, naturally, an engine from an old machine can act. It is also worth noting that the more massive the pulley, the more powerful the wood splitter will be.
First, the shaft should be planted in the sleeve and then assemble the shaft onto the bearings. After that, we securely fasten the cone to the shaft with spacer bolts so that the bolts go into the recesses in the cone. Then the pulley is mounted on the shaft and clamped through the lock nut with a washer. All mechanics are positioned and fixed on a sheet steel plate. At the end, you will need to make a frame, place the engine from the old washing machine on it and pull the belt between the motor pulley and the shaft.
Some ideas from other elements
The scope of the engine from the old, but so dear to the heart of the washing machine is truly great. The options described above are just some of the possibilities. More information about the use of this kind of engine, or, in general, all parts from an old washing machine, including a drum, can be found on the Internet.
« Better to see once than hear a hundred times” - this indisputable truth applies to finding interesting variations in the use of washing machine elements today. How? There are a lot of options on the Web that can be made not only from the engine, but also from the drum, housing and even the belt separately. What is this about? Some parts of the washing machine can be used to make a mill, a milling cutter, a generator, a pump, and even a brazier and part of the interior decor can be made from a drum!