In 1998, the French automobile concern Renault opened a new project to create an inexpensive family-type sedan. The finished model was presented to the public in 2004. Serial production of the car under the designation L90 began in Romania at the Dacia plant. A year later, the Renault Logan was assembled on the assembly line of the Moscow AvtoFramos plant, and in 2007 the car was assembled at the Mahindra & Renault joint venture in the Indian city of Nashik. The characteristics of the Renault Logan were determined taking into account the characteristics of the region where the car was used, for example, for Brazil, a 1-liter engine with a capacity of 70 hp was installed, but it could run on low-octane gasoline and ethyl alcohol.
The engines of Renault Logan cars supplied to the Russian market comply with Euro-3 and Euro-4 standards, their volume is 1.6 liters with a power of 105 hp, high-octane fuel is required for such engines.
Economy car
At the autumn motor show of 2012 in Paris, a presentation of the new Renault Logan with a sedan and Sandero hatchback took place. Finally, in April 2013, a station wagon modification was introduced in Geneva. At the Renault Logan project, the developers worked out the latest methods of computer-aided design of components and parts, cutting-edge technologies saved about 20 million euros. The manufacturers of units, body components and the power plant, together with the transmission, were tasked with bringing the Renault Logan project to a cost of around 5,000 euros. The machine was originally focused on the sale and operation in third world countries. The share of manual labor in the production of a car was set high, since automatic assembly lines are much more expensive.
Clearance is one of the main problems
Taking into account the prospect of driving on Russian roads, the Renault Logan clearance was calculated within 155 mm, while the European version is only 135-140 mm. However, when buying a car, Russian buyers unanimously said that it was low. Indeed, the majority of cars designed for operation in Russia have a clearance of 170 mm, and even this figure does not always correspond to the operating conditions on Russian roads. Recently, a paradoxical situation has been created in the Russian automobile market, manufacturers of passenger cars are trying to reduce ground clearance in order to reduce the center of gravity and increase the stability of the car, and it is becoming increasingly difficult to drive such a car. The reason is bad roads, bumps, potholes, bumps. The question of what clearance Renault Logan has is quite relevant. The problem of the low landing of his car constantly looms before the driver. And since any problem needs to be solved, you have to look for ways to increase ground clearance in order to cling less to the engine oil pan, lower shock absorber brackets and other protruding parts of the undercarriage for uneven roads.
Ground clearance and wheels
If we talk about increasing the clearance of the car on our own, then there are several ways to do this. To raise the car up to one and a half centimeters, it is enough to replace the factory standard tires with high-radius ones. For example, tires 195/65R14 on 195/70R14. Ground clearance will thus increase, albeit slightly. You can do it more radically and install R15 wheels on the car. In this case, the Renault Logan clearance will increase significantly, but this is possible if the wheel arches allow the rotation of a larger wheel without touching, rubbing and other related phenomena.
Therefore, you need to select the wheels also in width. You should also see how the new wheel fits into the niche arch when turning. In addition, it must be borne in mind that when installing R15 wheels, errors in the operation of the speedometer are inevitable.
The technical characteristics of the Renault Logan, whose clearance needs to be increased, allow some changes to be made. In order to raise the car higher, constructive methods of increasing ground clearance are used. One of them is the installation of so-called spacers in the rack with a spring socket. These are structurally simple products that repeat the radial contour of the rack, made of aluminum. The spacers come with a set of mounting bolts. The height of such a spacer is 20-25 mm, which, coupled with the new wheels, allows you to achieve a significant increase in the vehicle's ground clearance. To install the spacer, you need to slightly raise the front of the machine with a jack, loosen the central nut and tighten the spring with ties. After that, dismantle the rack and knock out the regular bolts of its fastening. Then press in new longer bolts and install the spacer. As a result, the clearance of Renault Logan will rise by 25 mm. The rear part is raised in a similar way, but the rubber spacer is used. Of course, before inserting these parts, they must be correctly selected. There are many spacers on the market in different sizes, made of various materials. It is important to observe the full compliance of the parameters of the new parts and the seat.
Clearance and turns
Often, the clearance decreases due to the natural shrinkage of the damping springs, which occurs due to the constant high loading of the trunk and passenger compartment. In this case, it is necessary to replace the springs with new ones. In this case, you can take advantage of the situation and replace the old springs with reinforced ones of the cargo standard, which will be more consistent with the operating conditions of the car. An independent increase in the clearance of Renault Logan within a small range, 15-30 mm, will not entail any negative consequences, except for errors in the speedometer readings.
Center of gravity
However, with an increase in clearance by 30 mm or more, you need to be prepared for the fact that it will become more difficult to drive the machine. Since the center of gravity has become higher than the calculated point and the balance of the entire undercarriage has already been disturbed to some extent, sharp turns and turns will have to be avoided, as they can be dangerous. Before increasing the clearance of the Renault Logan, it is necessary to determine the optimal values \u200b\u200bof the expected ground clearance and only then start work.
Watch an interesting video on this topic
In 1998, the French automobile concern Renault opened a new project to create an inexpensive family-type sedan. The finished model was presented to the public in 2004. Serial production of the car under the designation L90 began in Romania at the Dacia plant. A year later, the Renault Logan was assembled on the assembly line of the Moscow AvtoFramos plant, and in 2007 the car was assembled at Mahindra & Renault in the Indian city of Nashik. were determined taking into account the characteristics of the region of operation of the car, for example, for Brazil, a motor with a volume of only 1 liter and a power of 70 hp was installed, but it could run on low-octane gasoline and ethyl alcohol. The engines of Renault Logan cars supplied to the Russian market comply with Euro-3 and Euro-4 standards, their volume is 1.6 liters with a power of 105 hp, high-octane fuel is required for such engines.
Economy car
At the autumn motor show of 2012 in Paris, a presentation of the new Renault Logan with a sedan and Sandero hatchback was held. Finally, in April 2013, a station wagon modification was introduced in Geneva. At the Renault Logan project, the developers worked out the latest methods of computer design of components and parts, cutting-edge technologies saved about 20 million euros. The manufacturers of units, body components and the power plant, together with the transmission, were tasked with bringing the Renault Logan project to a cost of around 5,000 euros. The machine was originally focused on the sale and operation in third world countries. The share of manual labor in the production of a car was set high, since automatic assembly lines are much more expensive.
Clearance is one of the main problems
Taking into account the prospect of driving on Russian roads, the clearance was calculated within 155 mm, while the European version is only 135-140 mm. However, when buying a car, Russian buyers unanimously said that it was low. Indeed, the majority of cars designed for operation in Russia have a clearance of 170 mm, and even this figure does not always correspond to the operating conditions on Russian roads. Recently, a paradoxical situation has been created in the Russian automobile market, manufacturers of passenger cars are trying to reduce ground clearance in order to reduce the center of gravity and increase the stability of the car, and it is becoming increasingly difficult to drive such a car. The reason is bad roads, bumps, potholes, bumps. The question of what clearance Renault Logan has is quite relevant. The problem of the low landing of his car constantly looms before the driver. And since any problem needs to be solved, you have to look for ways to increase ground clearance in order to cling less to the engine oil pan, lower shock absorber brackets and other protruding parts of the undercarriage for uneven roads.
Ground clearance and wheels
If we talk about increasing the clearance of the car on our own, then there are several ways to do this. To raise the car up to one and a half centimeters, it is enough to replace the factory standard tires with high-radius ones. For example, tires 195/65R14 on 195/70R14. thus increasing, albeit slightly. You can do it more radically and install R15 wheels on the car. In this case, the Renault Logan clearance will increase significantly, but this is possible if the wheel arches allow the rotation of a larger wheel without touching, rubbing and other related phenomena. Therefore, you need to select the wheels also in width. You should also see how the new wheel fits into the niche arch when turning. In addition, it must be borne in mind that when installing R15 wheels, errors in the operation of the speedometer are inevitable.
Spacers
The technical characteristics of Renault Logan, the clearance of which needs to be increased, allow some changes to be made. In order to raise the car higher, constructive methods of increasing ground clearance are used. One of them is the installation of so-called spacers in the rack with a spring socket. These are structurally simple products that repeat the radial contour of the rack, made of aluminum. The spacers come with a set of mounting bolts. The height of such a spacer is 20-25 mm, which, coupled with the new wheels, allows you to achieve a significant increase in the vehicle's ground clearance. To install the spacer, you need to slightly raise the front of the machine with a jack, loosen the central nut and tighten the spring with ties. After that, dismantle the rack and knock out the regular bolts of its fastening. Then press in new longer bolts and install the spacer. As a result, the clearance of Renault Logan will rise by 25 mm. The rear part is raised in a similar way, but the rubber spacer is used. Of course, before inserting these parts, they must be correctly selected. There are many spacers on the market in different sizes, made of various materials. It is important to observe the full compliance of the parameters of the new parts and the seat.
Clearance and turns
Often, the clearance decreases due to the natural shrinkage of the damping springs, which occurs due to the constant high loading of the trunk and passenger compartment. In this case, it is necessary to replace the springs with new ones. In this case, you can take advantage of the situation and replace the old springs with reinforced ones of the cargo standard, which will be more consistent with the operating conditions of the car. An independent increase in the clearance of Renault Logan within a small range, 15-30 mm, will not entail any negative consequences, except for errors in the speedometer readings.
Center of gravity
However, with an increase in clearance by 30 mm or more, you need to be prepared for the fact that it will become more difficult to drive the machine. Since the center of gravity has become higher than the calculated point and the balance of the entire undercarriage has already been disturbed to some extent, sharp turns and turns will have to be avoided, as they can be dangerous. Before increasing the clearance of the Renault Logan, it is necessary to determine the optimal values \u200b\u200bof the expected ground clearance and only then start work.
Clearance, or, as it is also called, ground clearance, is a segment from the lowest point of the vehicle's body to the surface of the earth. But Renault Logan manufacturers measure this gap in various ways. Therefore, the clearance from the shock absorbers, crankcase, or exhaust pipe is less than the value indicated in the operating manual.
Important: for Russian roads, the clearance is important, so buyers pay special attention to this parameter.
During the existence of Renault Logan, this segment has changed several times.
- Clearance 155 mm. This parameter is for first generation vehicles manufactured in 2004, 2005, 2006, 2007, 2008 and 2009 in the sedan body and equipped with front-wheel drive and a 1.4 MT or 1.6 MT gasoline power unit with a power of 75 or 103 hp.
- Ground clearance 147 mm. The updated Renault Logan models of the first generation, released from 2009 to 2015, have this clearance value.
- Second generation. Cars produced in 2014, 2015, 2016 and 2017 have such a segment of 155 mm. All Renault variants of these years were created with 4-door sedan bodies. The machines are equipped with a 1.6 MT type power unit, the power of which is 82 or 102 hp. Options - Access, Confort, Luxe Privilege.
How to change ground clearance?
Each driver uses his car to transport goods. The more the car is loaded, the lower its clearance becomes. In addition, the state of Russian roads in 2018 is forcing motorists to increase the clearance of their vehicles.
In order to prevent the car from sagging much due to overload, and to increase the clearance, it is recommended to do the following:
- Mount the spacers on the support legs. This method will increase the value of this parameter by 3 cm.
- Replace shock absorber springs. The method is suitable for owners who have been moving to Renault Logan for a long time. Updating the springs allows you to increase the stability of vehicles on the road.
- Install new larger wheels.
- Update the shock absorber springs. This option helps to increase the clearance, but for a short time.
- Mount interturn spacers. This action not only increases the distance from the ground to the car, but also improves the performance of the shock absorbers.
Note: a hand-made increase in ground clearance negatively affects the handling of the car. And also leads to the speedy wear of spare parts that have other design loads.
Ground clearance or ground clearance Renault Logan, as for any other passenger car is an important factor on our roads. It is the condition of the road surface or its complete absence that makes Russian motorists interested in the clearance of Renault Logan and the possibility of increasing ground clearance with the help of spacers.
To begin with, it is worth saying honestly that real clearance Renault Logan may differ significantly from that declared by the manufacturer. The whole secret is in the method of measurement and the place of measurement of ground clearance. Therefore, you can find out the real state of affairs only by yourself armed with a tape measure or ruler. Official clearance Logan is 155 mm. Such a clearance value that the first generation of a budget sedan has, that of the second (current version). In reality, under the protection of the engine, you intend the same 155 mm or even 160mm of clearance in an empty car. In that regard, the manufacturer is honest with customers.
Some manufacturers go astray and claim the amount of ground clearance in an “empty” car, but in real life we have a trunk full of all kinds of things, passengers and a driver. That is, in a loaded car, the clearance will be completely different. Another factor that few people have in mind is the age of the car and the wear of the springs, their “sagging” from old age. The issue is solved by installing new springs or buying spacers under sagging logan springs. Spacers allow you to compensate for the drawdown of the springs and add a couple of centimeters of ground clearance. Sometimes even a centimeter in the parking lot at the curb plays an important role.
But do not get carried away with the “lift” of Renault Logan’s ground clearance, because the spacers to increase the clearance are focused only on springs. If you do not pay attention to the shock absorbers, the course of which is often very limited, then self-upgrading the suspension can lead to loss of control and damage to the shock absorbers. From a cross-country point of view ground clearance Renault Logan in our harsh conditions, this is good, but at high speeds on the highway and in corners, there is a serious buildup and additional body roll.
How to increase the clearance of Logan? Watch the video to see how you can do it yourself.
Any car manufacturer, when designing a suspension and choosing a clearance value, is looking for a golden mean between handling and cross-country ability. Perhaps the easiest, safest and most unpretentious way to increase the clearance is to install wheels with “high” rubber. Changing wheels makes it easy to increase ground clearance by another centimeter. If you put high profile tires on Renault Logan.
Do not forget that a serious change in clearance can damage the CV joints. After all, the “grenades” will have to work a little from a different angle. But this only applies to the front axle.
Clearance, or, as it is also called, ground clearance, is a segment from the lowest point of the vehicle's body to the surface of the earth. But Renault Logan manufacturers measure this gap in various ways. Therefore, the clearance from the shock absorbers, crankcase, or exhaust pipe is less than the value indicated in the operating manual.
Important: for Russian roads, the clearance is important, so buyers pay special attention to this parameter.
During the existence of Renault Logan, this segment has changed several times.
- Clearance 155 mm. This parameter is for first generation vehicles manufactured in 2004, 2005, 2006, 2007, 2008 and 2009 in the sedan body and equipped with front-wheel drive and a 1.4 MT or 1.6 MT gasoline power unit with a power of 75 or 103 hp.
- Ground clearance 147 mm. The updated Renault Logan models of the first generation, released from 2009 to 2015, have this clearance value.
- Second generation. Cars produced in 2014, 2015, 2016 and 2017 have such a segment of 155 mm. All Renault variants of these years were created with 4-door sedan bodies. The machines are equipped with a 1.6 MT type power unit, the power of which is 82 or 102 hp. Options - Access, Confort, Luxe Privilege.
How to change ground clearance?
Each driver uses his car to transport goods. The more the car is loaded, the lower its clearance becomes. In addition, the state of Russian roads in 2018 is forcing motorists to increase the clearance of their vehicles.
In order to prevent the car from sagging much due to overload, and to increase the clearance, it is recommended to do the following:
- Mount the spacers on the support legs. This method will increase the value of this parameter by 3 cm.
- Replace shock absorber springs. The method is suitable for owners who have been moving to Renault Logan for a long time. Updating the springs allows you to increase the stability of vehicles on the road.
- Install new larger wheels.
- Update the shock absorber springs. This option helps to increase the clearance, but for a short time.
- Mount interturn spacers. This action not only increases the distance from the ground to the car, but also improves the performance of the shock absorbers.
Note: a hand-made increase in ground clearance negatively affects the handling of the car. And also leads to the speedy wear of spare parts that have other design loads.